Hi,

How can I configure FreeRADIUS to assign IP address dinamically with Ip Pool when there is a successful authentication from Cisco 7200 access server with FreeRADIUS 1.0.0?

Like this it works sending out only 2 ip address...always the same...

Is your Cisco sending a unique nasport/nasip for each client? Ip pool uses the nasip/nasport to identify the user. YES FROM LOGS SHOWED BELOW, IT SENDS OUT THE SAME TWO ADDRESS AND DOESN'T KEEP ANYONE ENTRY IN YOUR DATABASE .IPPOOL (VIEWED WITH rlm_ippool_tool -a ...) run radiusd -X and have several users establish a connection. Post the output here if you can't decifer it. rad_recv: Access-Request packet from host 83.216.176.254:21661, id=219, length=95 Framed-Protocol = PPP User-Name = "font0001@" CHAP-Password = 0x01af73ef6670b0a4a65130cb133a902c2f NAS-Port-Type = Virtual NAS-Port = 0 Service-Type = Framed-User NAS-IP-Address = 83.216.176.254 rad_lowerpair: User-Name now 'font0001@' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 13 modcall[authorize]: module "preprocess" returns ok for request 13 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /freera d100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607 modcall[authorize]: module "auth_log" returns ok for request 13 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 13 modcall[authorize]: module "mschap" returns noop for request 13 rlm_realm: No '/' in User-Name = "font0001@", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "IPASS" returns noop for request 13 rlm_realm: Looking up realm "@" for User-Name = "font0001@" rlm_realm: No such realm "@" modcall[authorize]: module "suffix" returns noop for request 13 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 13 modcall[authorize]: module "files" returns notfound for request 13 radius_xlat: 'font0001@' rlm_sql (sql): sql_set_user escaped user --> 'font0001@' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'font0001@whdsl.satco m.it' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 4 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Valu e,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'font0001@' AN D usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'font0001@whdsl.satco m.it' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Valu e,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'font0001@' AN D usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 4 modcall[authorize]: module "sql" returns ok for request 13 modcall: group authorize returns ok for request 13 rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied CHAP-Password matches local User-Password Login OK: [font0001@/<CHAP-Password>] (from client Telecom-BRAS1-3 port 0) Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 13 modcall[post-auth]: module "main_pool" returns noop for request 13 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Found a stale entry for ip/port: 83.216.178.213/0 rlm_ippool: num: 0 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Allocating ip to nas/port: 83.216.176.254/0 rlm_ippool: num: 1 rlm_ippool: Allocated ip 83.216.178.190 to client on nas 83.216.176.254,port 0 modcall[post-auth]: module "whsitt_pool" returns ok for request 13 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /freer ad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607 modcall[post-auth]: module "reply_log" returns ok for request 13 rlm_sql (sql): Processing sql_postauth radius_xlat: 'font0001@' rlm_sql (sql): sql_set_user escaped user --> 'font0001@' radius_xlat: 'INSERT into radpostauth (id, user, pass, reply, date) values ('', 'font0001@whdsl.satcom.i t', 'Chap-Password', 'Access-Accept', NOW())' rlm_sql (sql) in sql_postauth: query is INSERT into radpostauth (id, user, pass, reply, date) values ('', 'font0001@', 'Chap-Password', 'Access-Accept', NOW()) rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 modcall[post-auth]: module "sql" returns ok for request 13 modcall: group post-auth returns ok for request 13 Sending Access-Accept of id 219 to 83.216.176.254:21661 Framed-IP-Netmask = 255.255.255.255 Service-Type = Framed-User Framed-Protocol = PPP Ascend-Client-Primary-DNS = 62.94.0.1 Ascend-Client-Secondary-DNS = 83.216.172.1 Framed-IP-Address = 83.216.178.190 Finished request 13 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 13 ID 219 with timestamp 42a5701c Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 83.216.176.254:21661, id=220, length=95 Framed-Protocol = PPP User-Name = "font0001@" CHAP-Password = 0x01852ebbe42598a17861fa2b06de488ff7 NAS-Port-Type = Virtual NAS-Port = 0 Service-Type = Framed-User NAS-IP-Address = 83.216.176.254 rad_lowerpair: User-Name now 'font0001@' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 15 modcall[authorize]: module "preprocess" returns ok for request 15 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /freera d100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607 modcall[authorize]: module "auth_log" returns ok for request 15 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 15 modcall[authorize]: module "mschap" returns noop for request 15 rlm_realm: No '/' in User-Name = "font0001@", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "IPASS" returns noop for request 15 rlm_realm: Looking up realm "@" for User-Name = "font0001@" rlm_realm: No such realm "@" modcall[authorize]: module "suffix" returns noop for request 15 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 15 modcall[authorize]: module "files" returns notfound for request 15 radius_xlat: 'font0001@' rlm_sql (sql): sql_set_user escaped user --> 'font0001@' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'font0001@whdsl.satco m.it' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 1 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Valu e,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'font0001@' AN D usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'font0001@whdsl.satco m.it' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Valu e,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'font0001@' AN D usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 1 modcall[authorize]: module "sql" returns ok for request 15 modcall: group authorize returns ok for request 15 rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied CHAP-Password matches local User-Password Login OK: [font0001@/<CHAP-Password>] (from client Telecom-BRAS1-3 port 0) Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 15 modcall[post-auth]: module "main_pool" returns noop for request 15 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Found a stale entry for ip/port: 83.216.178.190/0 rlm_ippool: num: 0 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Allocating ip to nas/port: 83.216.176.254/0 rlm_ippool: num: 1 rlm_ippool: Allocated ip 83.216.178.213 to client on nas 83.216.176.254,port 0 modcall[post-auth]: module "whsitt_pool" returns ok for request 15 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /freer ad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607 modcall[post-auth]: module "reply_log" returns ok for request 15 rlm_sql (sql): Processing sql_postauth radius_xlat: 'font0001@' rlm_sql (sql): sql_set_user escaped user --> 'font0001@' radius_xlat: 'INSERT into radpostauth (id, user, pass, reply, date) values ('', 'font0001@whdsl.satcom.i t', 'Chap-Password', 'Access-Accept', NOW())' rlm_sql (sql) in sql_postauth: query is INSERT into radpostauth (id, user, pass, reply, date) values ('', 'font0001@', 'Chap-Password', 'Access-Accept', NOW()) rlm_sql (sql): Reserving sql socket id: 0 rlm_sql (sql): Released sql socket id: 0 modcall[post-auth]: module "sql" returns ok for request 15 modcall: group post-auth returns ok for request 15 Sending Access-Accept of id 220 to 83.216.176.254:21661 Framed-IP-Netmask = 255.255.255.255 Service-Type = Framed-User Framed-Protocol = PPP Ascend-Client-Primary-DNS = 62.94.0.1 Ascend-Client-Secondary-DNS = 83.216.172.1 Framed-IP-Address = 83.216.178.213 Finished request 15 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 15 ID 220 with timestamp 42a5706e Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 83.216.176.254:21661, id=226, length=80 Framed-Protocol = PPP User-Name = "satc0002@" CHAP-Password = 0x0193da4f830e1c9dfa12364d6122880c8f NAS-Port-Type = Virtual NAS-Port = 0 Service-Type = Framed-User NAS-IP-Address = 83.216.176.254 rad_lowerpair: User-Name now 'satc0002@' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 24 modcall[authorize]: module "preprocess" returns ok for request 24 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /freera d100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607 modcall[authorize]: module "auth_log" returns ok for request 24 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 24 modcall[authorize]: module "mschap" returns noop for request 24 rlm_realm: No '/' in User-Name = "satc0002@", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "IPASS" returns noop for request 24 rlm_realm: Looking up realm "" for User-Name = "satc0002@" rlm_realm: No such realm "" modcall[authorize]: module "suffix" returns noop for request 24 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 24 modcall[authorize]: module "files" returns notfound for request 24 radius_xlat: 'satc0002@' rlm_sql (sql): sql_set_user escaped user --> 'satc0002@' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'satc0002@' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 1 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Valu e,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'satc0002@' AND usergroup.Gro upName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'satc0002@' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Valu e,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'satc0002@' AND usergroup.Gro upName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 1 modcall[authorize]: module "sql" returns ok for request 24 modcall: group authorize returns ok for request 24 rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied CHAP-Password matches local User-Password Login OK: [satc0002@/<CHAP-Password>] (from client Telecom-BRAS1-3 port 0) Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 24 modcall[post-auth]: module "main_pool" returns noop for request 24 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Found a stale entry for ip/port: 83.216.178.213/0 rlm_ippool: num: 0 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Allocating ip to nas/port: 83.216.176.254/0 rlm_ippool: num: 1 rlm_ippool: Allocated ip 83.216.178.190 to client on nas 83.216.176.254,port 0 modcall[post-auth]: module "whsitt_pool" returns ok for request 24 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /freer ad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607 modcall[post-auth]: module "reply_log" returns ok for request 24 rlm_sql (sql): Processing sql_postauth radius_xlat: 'satc0002@' rlm_sql (sql): sql_set_user escaped user --> 'satc0002@' radius_xlat: 'INSERT into radpostauth (id, user, pass, reply, date) values ('', 'satc0002@', 'Chap-Passw ord', 'Access-Accept', NOW())' rlm_sql (sql) in sql_postauth: query is INSERT into radpostauth (id, user, pass, reply, date) values ('', 'satc0002@', 'Chap-Password', 'Access-Accept', NOW()) rlm_sql (sql): Reserving sql socket id: 0 rlm_sql (sql): Released sql socket id: 0 modcall[post-auth]: module "sql" returns ok for request 24 modcall: group post-auth returns ok for request 24 Sending Access-Accept of id 226 to 83.216.176.254:21661 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.255 Ascend-Client-Primary-DNS = 62.94.0.1 Ascend-Client-Secondary-DNS = 83.216.172.1 Framed-IP-Address = 83.216.178.190 Finished request 24 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 24 ID 226 with timestamp 42a5710d Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 83.216.176.254:21661, id=228, length=80 Framed-Protocol = PPP User-Name = "satc0002@" CHAP-Password = 0x01645acb50fb384b93e96e5f96ab0056a8 NAS-Port-Type = Virtual NAS-Port = 0 Service-Type = Framed-User NAS-IP-Address = 83.216.176.254 rad_lowerpair: User-Name now 'satc0002@' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 27 modcall[authorize]: module "preprocess" returns ok for request 27 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /freera d100/var/log/radius/radacct/83.216.176.254/auth-detail-20050607 modcall[authorize]: module "auth_log" returns ok for request 27 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 27 modcall[authorize]: module "mschap" returns noop for request 27 rlm_realm: No '/' in User-Name = "satc0002@", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "IPASS" returns noop for request 27 rlm_realm: Looking up realm "" for User-Name = "satc0002@" rlm_realm: No such realm "" modcall[authorize]: module "suffix" returns noop for request 27 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 27 modcall[authorize]: module "files" returns notfound for request 27 radius_xlat: 'satc0002@' rlm_sql (sql): sql_set_user escaped user --> 'satc0002@' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'satc0002@' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 2 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Valu e,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'satc0002@' AND usergroup.Gro upName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'satc0002@' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Valu e,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'satc0002@' AND usergroup.Gro upName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 2 modcall[authorize]: module "sql" returns ok for request 27 modcall: group authorize returns ok for request 27 rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied CHAP-Password matches local User-Password Login OK: [satc0002@/<CHAP-Password>] (from client Telecom-BRAS1-3 port 0) Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 27 modcall[post-auth]: module "main_pool" returns noop for request 27 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Found a stale entry for ip/port: 83.216.178.190/0 rlm_ippool: num: 0 rlm_ippool: Searching for an entry for nas/port: 83.216.176.254/0 rlm_ippool: Allocating ip to nas/port: 83.216.176.254/0 rlm_ippool: num: 1 rlm_ippool: Allocated ip 83.216.178.213 to client on nas 83.216.176.254,port 0 modcall[post-auth]: module "whsitt_pool" returns ok for request 27 radius_xlat: '/freerad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607' rlm_detail: /freerad100/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /freer ad100/var/log/radius/radacct/83.216.176.254/reply-detail-20050607 modcall[post-auth]: module "reply_log" returns ok for request 27 rlm_sql (sql): Processing sql_postauth radius_xlat: 'satc0002@' rlm_sql (sql): sql_set_user escaped user --> 'satc0002@' radius_xlat: 'INSERT into radpostauth (id, user, pass, reply, date) values ('', 'satc0002@', 'Chap-Passw ord', 'Access-Accept', NOW())' rlm_sql (sql) in sql_postauth: query is INSERT into radpostauth (id, user, pass, reply, date) values ('', 'satc0002@', 'Chap-Password', 'Access-Accept', NOW()) rlm_sql (sql): Reserving sql socket id: 1 rlm_sql (sql): Released sql socket id: 1 modcall[post-auth]: module "sql" returns ok for request 27 modcall: group post-auth returns ok for request 27 Sending Access-Accept of id 228 to 83.216.176.254:21661 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Netmask = 255.255.255.255 Ascend-Client-Primary-DNS = 62.94.0.1 Ascend-Client-Secondary-DNS = 83.216.172.1 Framed-IP-Address = 83.216.178.213 Finished request 27 Going to the next request THAT's ALL Thanks a lot