Authentication problems
I've been trying to update from freeradius ver 1.1.3 to freeradius 2.1.9 and can't get past the authentication failure shown in the log below. I thought I had made the neessary changes to the database but clearly not. Can't see where to go from here. Any help would be much appreciated. radius=# select * radius-# from radcheck radius-# where radius-# username = 'ABC' radius-# ; id | username | attribute | op | value ------+----------+--------------------+----+------- 5220 | ABC | Simultaneous-Use | := | 1 5219 | ABC | Cleartext-Password | := | 123 radius=# select * radius-# from radusergroup radius-# ; username | groupname | priority ----------+-----------+---------- PW | dynamic | 0 CB | dynamic | 0 ABC | dynamic | 0 FreeRADIUS Version 2.1.9, for host i386-redhat-linux-gnu, built on May 24 2010 at 16:22:24 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.5.0/24 { require_message_authenticator = no secret = "testing123" shortname = "private-network-1" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.5.241 port 2053, id=160, length=226 ChilliSpot-Version = "1.0.11" User-Name = "ABC" CHAP-Challenge = 0x014f905c247fbaff1c852626260eae46 CHAP-Password = 0x00d5bd4083f746f787200a86229bcda7a2 NAS-IP-Address = 192.168.69.1 Service-Type = Login-User Framed-IP-Address = 192.168.69.132 Calling-Station-Id = "00-19-7D-6A-E7-67" Called-Station-Id = "00-1A-70-89-4F-EC" NAS-Identifier = "nas01" Acct-Session-Id = "4f8c231f00000001" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 WISPr-Logoff-URL = "http://192.168.69.1:3990/logoff" Message-Authenticator = 0xecf023c0d37b8e6451f63af3277a6882 +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "ABC", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = CHAP +- entering group CHAP {...} [chap] login attempt by "ABC" with CHAP password [chap] Cleartext-Password is required for authentication ++[chap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ABC attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 160 to 192.168.5.241 port 2053 Waking up in 4.9 seconds. Cleaning up request 0 ID 160 with timestamp +16 Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentication-problems-tp5644080p56... Sent from the FreeRadius - User mailing list archive at Nabble.com.
a very quick look at your output and it seems like you are not calling 'sql' in your virtual-servers at all if you did, there'd be a call checking your SQL info - read and edit the sites-enabled/* files alan
Thanks for that. You're quite right. I now feel more stupid than a very stupid person. My only excuse is that I've installed so many times I've lost track. Probably of my marbles. Anyway I've now enabled sql and the new debug info is below. FreeRADIUS Version 2.1.9, for host i386-redhat-linux-gnu, built on May 24 2010 at 16:22:24 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/postgresql/dialup.conf including configuration file /etc/raddb/sqlippool.conf including configuration file /etc/raddb/sql/postgresql/ippool.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.5.0/24 { require_message_authenticator = no secret = "testing123" shortname = "private-network-1" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_postgresql" server = "localhost" port = "" login = "chilliuser" password = "chilli51spot" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = "UPDATE radacct SET AcctStopTime = ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), AcctSessionTime = (EXTRACT(EPOCH FROM ('%S'::timestamp with time zone - AcctStartTime::timestamp with time zone - '%{%{Acct-Delay-Time}:-0}'::interval)))::BIGINT, AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = 0 WHERE AcctStopTime IS NULL AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'::timestamp" accounting_update_query = "UPDATE radacct SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint) WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime IS NULL" accounting_update_query_alt = "INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, XAscendSessionSvrKey) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{NAS-IP-Address}', %{%{NAS-Port}:-NULL}::integer, '%{NAS-Port-Type}', ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval - '%{%{Acct-Session-Time}:-0}'::interval), '%{Acct-Session-Time}', '%{Acct-Authentic}', (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet, '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = "INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctAuthentic, ConnectInfo_start, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{NAS-IP-Address}', %{%{NAS-Port}:-NULL}::integer, '%{NAS-Port-Type}', ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), '%{Acct-Authentic}', '%{Connect-Info}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet, 0, '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), AcctStartDelay = 0, ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL" accounting_stop_query = "UPDATE radacct SET AcctStopTime = ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), AcctSessionTime = CASE WHEN '%{Acct-Session-Time}' = '' THEN (EXTRACT(EPOCH FROM ('%S'::TIMESTAMP WITH TIME ZONE - AcctStartTime::TIMESTAMP WITH TIME ZONE - '%{%{Acct-Delay-Time}:-0}'::INTERVAL)))::BIGINT ELSE NULLIF('%{Acct-Session-Time}','')::BIGINT END, AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = 0, FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL" accounting_stop_query_alt = "INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{NAS-IP-Address}', %{%{NAS-Port}:-NULL}::integer, '%{NAS-Port-Type}', ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval - '%{%{Acct-Session-Time}:-0}'::interval), ('%S'::timestamp - '%{%{Acct-Delay-Time}:-0}'::interval), NULLIF('%{Acct-Session-Time}', '')::bigint, '%{Acct-Authentic}', '%{Connect-Info}', (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet, 0)" group_membership_query = "SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW())" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked rlm_sql (sql): Attempting to connect to chilliuser@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_postgresql #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_postgresql #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_postgresql #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_postgresql #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_postgresql #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.5.241 port 2053, id=180, length=226 ChilliSpot-Version = "1.0.11" User-Name = "ABC" CHAP-Challenge = 0x6e37280ebb86c255086f2ab80c521e24 CHAP-Password = 0x005223d2d8d662465852923eae583ade21 NAS-IP-Address = 192.168.69.1 Service-Type = Login-User Framed-IP-Address = 192.168.69.132 Calling-Station-Id = "00-19-7D-6A-E7-67" Called-Station-Id = "00-1A-70-89-4F-EC" NAS-Identifier = "nas01" Acct-Session-Id = "4f8c231f00000001" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 WISPr-Logoff-URL = "http://192.168.69.1:3990/logoff" Message-Authenticator = 0x76c53837b6e200276ccf270b43f8806b +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "ABC", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop [sql] expand: %{User-Name} -> ABC [sql] sql_set_user escaped user --> 'ABC' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = 'ABC' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 2 , fields = 5 [sql] User found in radcheck table [sql] expand: SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = 'ABC' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 [sql] expand: SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM radusergroup WHERE UserName='ABC' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 [sql] expand: SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = 'dynamic' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 [sql] User found in group dynamic [sql] expand: SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = 'dynamic' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 5 rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = CHAP +- entering group CHAP {...} [chap] login attempt by "ABC" with CHAP password [chap] Using clear text password "123" for user ABC authentication. [chap] Password check failed ++[chap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ABC attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 180 to 192.168.5.241 port 2053 Waking up in 4.9 seconds. Cleaning up request 0 ID 180 with timestamp +18 Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentication-problems-tp5644080p56... Sent from the FreeRadius - User mailing list archive at Nabble.com.
hi, your NAS is sending a CHAP request not a PAP request , you have a plain text password for PAP. adjust NAS or your configuration/storage? A database can only be queried for values not as a challenge-response repository, alan
Thanks for the reply. Don't quite understand. The log suggests that pap is returning noop and then that the auth type CHAP is found. Then says that chap authentication with a clear text password is failing. Or am I reading this incorrectly? -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentication-problems-tp5644080p56... Sent from the FreeRadius - User mailing list archive at Nabble.com.
hi,
Thanks for the reply. Don't quite understand. The log suggests that pap is returning noop and then that the auth type CHAP is found. Then says that chap authentication with a clear text password is failing.
the incoming request contains this: CHAP-Challenge = 0x6e37280ebb86c255086f2ab80c521e24 CHAP-Password = 0x005223d2d8d662465852923eae583ade21 if it was PAP is wouldnt have these values, it would just have User-Password = "blahblah" so, CHAP module sees these values...and sets the auth-type to CHAP. PAP module is doing a noop because the auth-type has already been set. did you have this construction working in your older FR setup? If so, you will need to check yoru config to see what else you were doing..... if not...i'd say change the ChilliSpot server to send the request as PAP alan
pessimist wrote:
Thanks for the reply. Don't quite understand. The log suggests that pap is returning noop and then that the auth type CHAP is found. Then says that chap authentication with a clear text password is failing.
Or am I reading this incorrectly?
The debug output is clear. The password you supplied as the "known good" password doesn't match the CHAP password in the packet. Either you typed the password wrong, or the "known good" password in the DB is wrong. There are no other choices. Alan DeKok.
On Apr 16, 2012, at 11:51 AM, pessimist wrote:
Found Auth-Type = CHAP +- entering group CHAP {...} [chap] login attempt by "ABC" with CHAP password [chap] Using clear text password "123" for user ABC authentication. [chap] Password check failed ++[chap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ABC attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds
greetings, your output looks similar to mine. I recently setup a bunch of mac computers using 802.1x with hp/3com switches. try connecting with flat file username and password, bypass sql for now. verify radius works at with md5/leap, else set switch to eap and pass tickets. -j
O.K. Thanks everybody. It would appear that the shared secret was being passed incorrectly by NAS. It now behaves as it should. Don't understand why FR1 worked with exactly the same NAS though. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentication-problems-tp5644080p56... Sent from the FreeRadius - User mailing list archive at Nabble.com.
participants (4)
-
Alan Buxey -
Alan DeKok -
Jeff Donovan -
pessimist