Hi, I am trying to create a dynamic interface for the dail-up users assign it to a vrf and then configure the ip address. The config that I have done in the users file is as; tcl Cleartext-Password := "tcl" #tcl@cisco1.com Cleartext-Password := "tcl" Service-Type = Framed-User, Framed-Protocol = PPP, # Cisco-AVpair = "lcp:interface-config=ip vrf forwarding RWCustomer-A\n ip add 10.110.11.2 255.255.255.252", Cisco-AVpair += "lcp:interface-config=ip vrf forwarding \ RWCustomer-A", Framed-IP-Address = 10.110.11.1, Framed-IP-Netmask = 255.255.255.252, Framed-Filter-Id = "std.ppp", Framed-MTU = 1500, Framed-Compression = Van-Jacobsen-TCP-IP With this I am not able to see as expected from the radius server. I have also made an entry in proxy.conf file for realm cisco1.com Any inputs or guidance on this will be a appreciated. Thanks in Advance. Regards, Yagnesh Dave.
I am trying to create a dynamic interface for the dail-up users assign it to a vrf and then configure the ip address. The config that I have done in the users file is as;
tcl Cleartext-Password := "tcl" #tcl@cisco1.com Cleartext-Password := "tcl" Service-Type = Framed-User, Framed-Protocol = PPP, # Cisco-AVpair = "lcp:interface-config=ip vrf forwarding RWCustomer-A\n ip add 10.110.11.2 255.255.255.252", Cisco-AVpair += "lcp:interface-config=ip vrf forwarding \ RWCustomer-A", Framed-IP-Address = 10.110.11.1, Framed-IP-Netmask = 255.255.255.252, Framed-Filter-Id = "std.ppp", Framed-MTU = 1500, Framed-Compression = Van-Jacobsen-TCP-IP
With this I am not able to see as expected from the radius server.
And where is the debug that shows that? Ivan Kalik Kalik Informatika ISP
participants (2)
-
Ivan Kalik -
Yagnesh Dave