Hello there !! Help Me! I'm sorry, my English is not good. I am migrating a FreeRadius server, but I'm having trouble connecting with EAP-TTLS + MS-CHAPv2. The migration source is FreeRadius v2, but this time it is a migration to FreeRadius v3. Although the configuration is a straight migration, some settings have been added as dynamic VLAN is required. At first we recommended to build with EAP-TTLS + PAP, but customers are required to connect with EAP-TTLS + MS-CHAPv2 When EAP-TTLS + PAP, although authentication was successful, it will be an error if it is made EAP-TTLS + MS-CHAPv2 connection. Specifically, I get into trouble with the following error at the point of authenticate section. ------ (6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG. DELETE IT. (6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: ERROR: Attribute "User-Password" is required for authentication ------ As a question and support 1. Can I authenticate using EAP-TTLS + MS-CHAPv2? 2. What advice, suggestions, or areas for improvement in solving the problem? I would like wisdom and support. ============================================================================ FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-available/ldap.attrmap including configuration file /etc/raddb/mods-available/ldap.attrmap including configuration file /etc/raddb/mods-available/ldap.attrmap including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = yes auth = yes auth_badpass = no auth_goodpass = no msg_badpass = "%{control:Auth-Type};%{%{outer.request:Calling-Station-Id}:-%{Calling-Station-Id}};%{Called-Station-Id};%{Connect-Info};%{Fortinet-Vdom-Name};%{NAS-Identifier};%{Framed-IP-Address};%{request:User-Name}" msg_goodpass = "%{control:Auth-Type};%{%{outer.request:Calling-Station-Id}:-%{Calling-Station-Id}};%{Called-Station-Id};%{Connect-Info};%{Fortinet-Vdom-Name};%{NAS-Identifier};%{Framed-IP-Address};%{request:User-Name}" colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server jp-top-nii { ipaddr = 210.151.94.178 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server jp-top-tohoku { ipaddr = 210.151.94.186 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm ~^(.+\.)?hoge\.ac\.jp$ { authhost = LOCAL accthost = LOCAL } realm NULL { authhost = LOCAL accthost = LOCAL } home_server_pool jp-top { type = fail-over home_server = jp-top-nii home_server = jp-top-tohoku } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client top_radius_nii_ver2 { ipaddr = 210.151.94.178 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client top_radius_ver2 { ipaddr = 210.151.94.186 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client xxx.15.yyy.241 { require_message_authenticator = no secret = <<< secret >>> shortname = "netwlc01" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.241. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.242 { require_message_authenticator = no secret = <<< secret >>> shortname = "netwlc02" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.242. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.243 { require_message_authenticator = no secret = <<< secret >>> shortname = "netwlauth01" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.243. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.244 { require_message_authenticator = no secret = <<< secret >>> shortname = "netwlauth02" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.244. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.245 { require_message_authenticator = no secret = <<< secret >>> shortname = "netwlauth" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.245. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.yyy { require_message_authenticator = no secret = <<< secret >>> shortname = "netmgmtfw" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.yyy. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.3 { require_message_authenticator = no secret = <<< secret >>> shortname = "netfw_gwvpn" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.3. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.4 { require_message_authenticator = no secret = <<< secret >>> shortname = "netguestnat" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.4. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.10 { require_message_authenticator = no secret = <<< secret >>> shortname = "netwifinat" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.10. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.230 { require_message_authenticator = no secret = <<< secret >>> shortname = "netms" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.230. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.103.32 { require_message_authenticator = no secret = <<< secret >>> shortname = "radius0" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.103.32. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.103.33 { require_message_authenticator = no secret = <<< secret >>> shortname = "radius1" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.103.33. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.64.48 { require_message_authenticator = no secret = <<< secret >>> shortname = "hoge-test" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.64.48. Please fix your configuration Support for old-style clients will be removed in a future release client xxx.15.yyy.14 { require_message_authenticator = no secret = <<< secret >>> shortname = "localtest" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client xxx.15.yyy.14. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = yes input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /テ、テゥテカテシテテ「テヲテァティテゥテェテォテョテッテエナ禿ケテサテシaテソテ・嘉姪愿淌€テづ・・暗嘉甘凝偲湘版津凖崚愬ク" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap_allusers" from file /etc/raddb/mods-enabled/ldap ldap ldap_allusers { server = "ldaps://ldap.edu.hoge.ac.jp:636" identity = "uid=radius,ou=systems,dc=edu,dc=hoge,dc=ac,dc=jp" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { scope = "sub" name_attribute = "cn" cacheable_name = no cacheable_dn = no } client { scope = "sub" base_dn = "" } profile { } options { ldap_debug = 0 net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/ldap.edu.hoge.ac.jp.cer" start_tls = no } } Creating attribute ldap_allusers-LDAP-Group # Loading module "ldap_regularusers" from file /etc/raddb/mods-enabled/ldap ldap ldap_regularusers { server = "ldaps://ldap.edu.hoge.ac.jp:636" identity = "uid=radius,ou=systems,dc=edu,dc=hoge,dc=ac,dc=jp" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { scope = "sub" name_attribute = "cn" cacheable_name = no cacheable_dn = no } client { scope = "sub" base_dn = "" } profile { } options { ldap_debug = 0 net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/ldap.edu.hoge.ac.jp.cer" start_tls = no } } Creating attribute ldap_regularusers-LDAP-Group # Loading module "ldap_participant" from file /etc/raddb/mods-enabled/ldap ldap ldap_participant { server = "ldaps://ldap.edu.hoge.ac.jp:636" identity = "uid=radius,ou=systems,dc=edu,dc=hoge,dc=ac,dc=jp" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { scope = "sub" name_attribute = "cn" cacheable_name = no cacheable_dn = no } client { scope = "sub" base_dn = "" } profile { } options { ldap_debug = 0 net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/ldap.edu.hoge.ac.jp.cer" start_tls = no } } Creating attribute ldap_participant-LDAP-Group # Loaded module rlm_sql # Loading module "hpcportal_vpn" from file /etc/raddb/mods-enabled/sql sql hpcportal_vpn { driver = "rlm_sql_mysql" server = "hpcportal.fuga.hoge.ac.jp" port = 0 login = "radius" password = <<< secret >>> radius_db = "radius_vpn" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (hpcportal_vpn): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute hpcportal_vpn-SQL-Group # Loading module "hpcportal_wifi" from file /etc/raddb/mods-enabled/sql sql hpcportal_wifi { driver = "rlm_sql_mysql" server = "hpcportal.fuga.hoge.ac.jp" port = 0 login = "radius" password = <<< secret >>> radius_db = "radius_wifi" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (hpcportal_wifi): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute hpcportal_wifi-SQL-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.key" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "ldap_allusers" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 rlm_ldap (ldap_allusers): Couldn't find configuration for accounting, will return NOOP for calls from this section rlm_ldap (ldap_allusers): Couldn't find configuration for post-auth, will return NOOP for calls from this section rlm_ldap (ldap_allusers): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap_allusers): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap_allusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_allusers): Waiting for bind result... rlm_ldap (ldap_allusers): Bind successful rlm_ldap (ldap_allusers): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap_allusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_allusers): Waiting for bind result... rlm_ldap (ldap_allusers): Bind successful rlm_ldap (ldap_allusers): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap_allusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_allusers): Waiting for bind result... rlm_ldap (ldap_allusers): Bind successful rlm_ldap (ldap_allusers): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap_allusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_allusers): Waiting for bind result... rlm_ldap (ldap_allusers): Bind successful rlm_ldap (ldap_allusers): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap_allusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_allusers): Waiting for bind result... rlm_ldap (ldap_allusers): Bind successful # Instantiating module "ldap_regularusers" from file /etc/raddb/mods-enabled/ldap rlm_ldap (ldap_regularusers): Couldn't find configuration for accounting, will return NOOP for calls from this section rlm_ldap (ldap_regularusers): Couldn't find configuration for post-auth, will return NOOP for calls from this section rlm_ldap (ldap_regularusers): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap_regularusers): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap_regularusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_regularusers): Waiting for bind result... rlm_ldap (ldap_regularusers): Bind successful rlm_ldap (ldap_regularusers): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap_regularusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_regularusers): Waiting for bind result... rlm_ldap (ldap_regularusers): Bind successful rlm_ldap (ldap_regularusers): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap_regularusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_regularusers): Waiting for bind result... rlm_ldap (ldap_regularusers): Bind successful rlm_ldap (ldap_regularusers): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap_regularusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_regularusers): Waiting for bind result... rlm_ldap (ldap_regularusers): Bind successful rlm_ldap (ldap_regularusers): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap_regularusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_regularusers): Waiting for bind result... rlm_ldap (ldap_regularusers): Bind successful # Instantiating module "ldap_participant" from file /etc/raddb/mods-enabled/ldap rlm_ldap (ldap_participant): Couldn't find configuration for accounting, will return NOOP for calls from this section rlm_ldap (ldap_participant): Couldn't find configuration for post-auth, will return NOOP for calls from this section rlm_ldap (ldap_participant): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap_participant): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap_participant): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_participant): Waiting for bind result... rlm_ldap (ldap_participant): Bind successful rlm_ldap (ldap_participant): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap_participant): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_participant): Waiting for bind result... rlm_ldap (ldap_participant): Bind successful rlm_ldap (ldap_participant): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap_participant): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_participant): Waiting for bind result... rlm_ldap (ldap_participant): Bind successful rlm_ldap (ldap_participant): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap_participant): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_participant): Waiting for bind result... rlm_ldap (ldap_participant): Bind successful rlm_ldap (ldap_participant): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap_participant): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_participant): Waiting for bind result... rlm_ldap (ldap_participant): Bind successful # Instantiating module "hpcportal_vpn" from file /etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.5.60-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (hpcportal_vpn): Attempting to connect to database "radius_vpn" rlm_sql (hpcportal_vpn): Initialising connection pool pool { start = 5 min = 5 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 60 spread = no } rlm_sql (hpcportal_vpn): Opening additional connection (0), 1 of 10 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_vpn' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_vpn): Opening additional connection (1), 1 of 9 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_vpn' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_vpn): Opening additional connection (2), 1 of 8 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_vpn' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_vpn): Opening additional connection (3), 1 of 7 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_vpn' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_vpn): Opening additional connection (4), 1 of 6 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_vpn' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 # Instantiating module "hpcportal_wifi" from file /etc/raddb/mods-enabled/sql mysql { tls { } warnings = "auto" } rlm_sql (hpcportal_wifi): Attempting to connect to database "radius_wifi" rlm_sql (hpcportal_wifi): Initialising connection pool pool { start = 5 min = 5 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 60 spread = no } rlm_sql (hpcportal_wifi): Opening additional connection (0), 1 of 10 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_wifi' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_wifi): Opening additional connection (1), 1 of 9 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_wifi' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_wifi): Opening additional connection (2), 1 of 8 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_wifi' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_wifi): Opening additional connection (3), 1 of 7 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_wifi' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 rlm_sql (hpcportal_wifi): Opening additional connection (4), 1 of 6 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_wifi' on hpcportal.fuga.hoge.ac.jp via TCP/IP, server version 5.5.60-0+deb7u1-log, protocol version 10 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:519 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 33616 Listening on proxy address :: port 59643 Ready to process requests (0) Received Access-Request Id 22 from xxx.15.yyy.241:55854 to xxx.15.yyy.14:1812 length 154 (0) User-Name = "th024" (0) NAS-IP-Address = 10.yyy.0.241 (0) NAS-Port = 12289 (0) Called-Station-Id = "08-35-71-F2-CE-05:authtest" (0) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (0) Framed-MTU = 1250 (0) NAS-Port-Type = Wireless-802.11 (0) Framed-Compression = None (0) Connect-Info = "CONNECT 802.11g" (0) Chargeable-User-Identity = 0x00 (0) EAP-Message = 0x0201000a017468303234 (0) Message-Authenticator = 0x840d88d10449f4ec3854675f80747e7d (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy rewrite_called_station_id { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) update request { (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> 08-35-71-F2-CE-05 (0) &Called-Station-Id := 08-35-71-F2-CE-05 (0) } # update request = noop (0) if ("%{8}") { (0) EXPAND %{8} (0) --> authtest (0) if ("%{8}") -> TRUE (0) if ("%{8}") { (0) update request { (0) EXPAND %{8} (0) --> authtest (0) &Called-Station-SSID := authtest (0) } # update request = noop (0) } # if ("%{8}") = noop (0) [updated] = updated (0) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_called_station_id = updated (0) if (&outer.request) { (0) if (&outer.request) -> FALSE (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "th024", looking up realm NULL (0) suffix: Found realm "NULL" (0) suffix: Adding Stripped-User-Name = "th024" (0) suffix: Adding Realm = "NULL" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) eap: Peer sent EAP Response (code 2) ID 1 length 10 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0x46a6c18646a4d404 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 22 from xxx.15.yyy.14:1812 to xxx.15.yyy.241:55854 length 0 (0) EAP-Message = 0x010200061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x46a6c18646a4d40457af669e53ad5d2c (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 26 from xxx.15.yyy.241:55854 to xxx.15.yyy.14:1812 length 275 (1) User-Name = "th024" (1) NAS-IP-Address = 10.yyy.0.241 (1) NAS-Port = 12289 (1) Called-Station-Id = "08-35-71-F2-CE-05:authtest" (1) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (1) Framed-MTU = 1250 (1) NAS-Port-Type = Wireless-802.11 (1) Framed-Compression = None (1) Connect-Info = "CONNECT 802.11g" (1) Chargeable-User-Identity = 0x00 (1) EAP-Message = 0x0202007115800000006716030100620100005e03015d3eb4c67fa23b6d0b4c5ec20cc49649aff637c3be342295ac4efacdb2b239ae000018c014c0130035002fc00ac00900380032000a0013000500040100001d000a0006000400170018000b000201000023000000170000ff01000100 (1) State = 0x46a6c18646a4d40457af669e53ad5d2c (1) Message-Authenticator = 0x17362bfa2a6ebc276d8d58dee3b11399 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy rewrite_called_station_id { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> 08-35-71-F2-CE-05 (1) &Called-Station-Id := 08-35-71-F2-CE-05 (1) } # update request = noop (1) if ("%{8}") { (1) EXPAND %{8} (1) --> authtest (1) if ("%{8}") -> TRUE (1) if ("%{8}") { (1) update request { (1) EXPAND %{8} (1) --> authtest (1) &Called-Station-SSID := authtest (1) } # update request = noop (1) } # if ("%{8}") = noop (1) [updated] = updated (1) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_called_station_id = updated (1) if (&outer.request) { (1) if (&outer.request) -> FALSE (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "th024", looking up realm NULL (1) suffix: Found realm "NULL" (1) suffix: Adding Stripped-User-Name = "th024" (1) suffix: Adding Realm = "NULL" (1) suffix: Authentication realm is LOCAL (1) [suffix] = ok (1) eap: Peer sent EAP Response (code 2) ID 2 length 113 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x46a6c18646a4d404 (1) eap: Finished EAP session with state 0x46a6c18646a4d404 (1) eap: Previous EAP request found for state 0x46a6c18646a4d404, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 103 bytes (1) eap_ttls: Got complete TLS record (103 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before/accept initialization (1) eap_ttls: TLS_accept: before/accept initialization (1) eap_ttls: <<< recv TLS 1.0 Handshake [length 0062], ClientHello (1) eap_ttls: TLS_accept: SSLv3 read client hello A (1) eap_ttls: >>> send TLS 1.0 Handshake [length 0039], ServerHello (1) eap_ttls: TLS_accept: SSLv3 write server hello A (1) eap_ttls: >>> send TLS 1.0 Handshake [length 069c], Certificate (1) eap_ttls: TLS_accept: SSLv3 write certificate A (1) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_ttls: TLS_accept: SSLv3 write key exchange A (1) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_ttls: TLS_accept: SSLv3 write server done A (1) eap_ttls: TLS_accept: SSLv3 flush data (1) eap_ttls: TLS_accept: SSLv3 read client certificate A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 3 length 1014 (1) eap: EAP session adding &reply:State = 0x46a6c18647a5d404 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 26 from xxx.15.yyy.14:1812 to xxx.15.yyy.241:55854 length 0 (1) EAP-Message = 0x010303f615c0000008381603010039020000350301505f2baac0f5284f31ea88810d3c89707003b3ead5bffb52dc73d9e9324090b600c01400000dff01000100000b000403000102160301069c0b0006980006950006923082068e30820576a00302010202106cb5b25d9b75ce5e636a99e15b139e6930 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x46a6c18647a5d40457af669e53ad5d2c (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 30 from xxx.15.yyy.241:55854 to xxx.15.yyy.14:1812 length 168 (2) User-Name = "th024" (2) NAS-IP-Address = 10.yyy.0.241 (2) NAS-Port = 12289 (2) Called-Station-Id = "08-35-71-F2-CE-05:authtest" (2) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (2) Framed-MTU = 1250 (2) NAS-Port-Type = Wireless-802.11 (2) Framed-Compression = None (2) Connect-Info = "CONNECT 802.11g" (2) Chargeable-User-Identity = 0x00 (2) EAP-Message = 0x020300061500 (2) State = 0x46a6c18647a5d40457af669e53ad5d2c (2) Message-Authenticator = 0xfcb02c619c26053e8427e00a6d6d1fa5 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy rewrite_called_station_id { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) update request { (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (2) --> 08-35-71-F2-CE-05 (2) &Called-Station-Id := 08-35-71-F2-CE-05 (2) } # update request = noop (2) if ("%{8}") { (2) EXPAND %{8} (2) --> authtest (2) if ("%{8}") -> TRUE (2) if ("%{8}") { (2) update request { (2) EXPAND %{8} (2) --> authtest (2) &Called-Station-SSID := authtest (2) } # update request = noop (2) } # if ("%{8}") = noop (2) [updated] = updated (2) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (2) ... skipping else: Preceding "if" was taken (2) } # policy rewrite_called_station_id = updated (2) if (&outer.request) { (2) if (&outer.request) -> FALSE (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "th024", looking up realm NULL (2) suffix: Found realm "NULL" (2) suffix: Adding Stripped-User-Name = "th024" (2) suffix: Adding Realm = "NULL" (2) suffix: Authentication realm is LOCAL (2) [suffix] = ok (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x46a6c18647a5d404 (2) eap: Finished EAP session with state 0x46a6c18647a5d404 (2) eap: Previous EAP request found for state 0x46a6c18647a5d404, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1014 (2) eap: EAP session adding &reply:State = 0x46a6c18644a2d404 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 30 from xxx.15.yyy.14:1812 to xxx.15.yyy.241:55854 length 0 (2) EAP-Message = 0x010403f615c000000838312e7365636f6d74727573742e6e65742f73707063612f6e69692f6f64636xxx2f66756c6c63726c67352e63726c301d0603551d0e04160414c2d20294a034b602031940a2729487d88288158d300e0603551d0f0101ff0404030205a03082017e060a2b06010401d679020402 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x46a6c18644a2d40457af669e53ad5d2c (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 34 from xxx.15.yyy.241:55854 to xxx.15.yyy.14:1812 length 168 (3) User-Name = "th024" (3) NAS-IP-Address = 10.yyy.0.241 (3) NAS-Port = 12289 (3) Called-Station-Id = "08-35-71-F2-CE-05:authtest" (3) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (3) Framed-MTU = 1250 (3) NAS-Port-Type = Wireless-802.11 (3) Framed-Compression = None (3) Connect-Info = "CONNECT 802.11g" (3) Chargeable-User-Identity = 0x00 (3) EAP-Message = 0x020400061500 (3) State = 0x46a6c18644a2d40457af669e53ad5d2c (3) Message-Authenticator = 0x7568ef0c39392710f48ef419c26f1c08 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy rewrite_called_station_id { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) update request { (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (3) --> 08-35-71-F2-CE-05 (3) &Called-Station-Id := 08-35-71-F2-CE-05 (3) } # update request = noop (3) if ("%{8}") { (3) EXPAND %{8} (3) --> authtest (3) if ("%{8}") -> TRUE (3) if ("%{8}") { (3) update request { (3) EXPAND %{8} (3) --> authtest (3) &Called-Station-SSID := authtest (3) } # update request = noop (3) } # if ("%{8}") = noop (3) [updated] = updated (3) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (3) ... skipping else: Preceding "if" was taken (3) } # policy rewrite_called_station_id = updated (3) if (&outer.request) { (3) if (&outer.request) -> FALSE (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "th024", looking up realm NULL (3) suffix: Found realm "NULL" (3) suffix: Adding Stripped-User-Name = "th024" (3) suffix: Adding Realm = "NULL" (3) suffix: Authentication realm is LOCAL (3) [suffix] = ok (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x46a6c18644a2d404 (3) eap: Finished EAP session with state 0x46a6c18644a2d404 (3) eap: Previous EAP request found for state 0x46a6c18644a2d404, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 106 (3) eap: EAP session adding &reply:State = 0x46a6c18645a3d404 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 34 from xxx.15.yyy.14:1812 to xxx.15.yyy.241:55854 length 0 (3) EAP-Message = 0x0105006a1580000008383c89f2018ad94ae9ef10dac4846fe15f06af68e688d285abdce2f8071ab3485055e550f5c09841c956f7e5a07d9a04c4ebaeb94bd1c6515c8302ddffa60378edb6d06df5136ec9081e51f7d3c115658cc00d94ayyy1e2716030100040e000000 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x46a6c18645a3d40457af669e53ad5d2c (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 37 from xxx.15.yyy.241:55854 to xxx.15.yyy.14:1812 length 306 (4) User-Name = "th024" (4) NAS-IP-Address = 10.yyy.0.241 (4) NAS-Port = 12289 (4) Called-Station-Id = "08-35-71-F2-CE-05:authtest" (4) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (4) Framed-MTU = 1250 (4) NAS-Port-Type = Wireless-802.11 (4) Framed-Compression = None (4) Connect-Info = "CONNECT 802.11g" (4) Chargeable-User-Identity = 0x00 (4) EAP-Message = 0x02050090158000000086160301004610000042410405843b499af639f4b0e4083dd9bdd8b3135f9bc5bb4fec1e422796a9ae81a89a1e8a93ec033a4240c3e9cf66b8692ca445301766ec768b170f2b40973352c2be14030100010116030100308f632392e4ed173b3cfe1ac75ac4068737da89fe44a368 (4) State = 0x46a6c18645a3d40457af669e53ad5d2c (4) Message-Authenticator = 0x1460658711174547a90f4d0824e477a3 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy rewrite_called_station_id { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) update request { (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (4) --> 08-35-71-F2-CE-05 (4) &Called-Station-Id := 08-35-71-F2-CE-05 (4) } # update request = noop (4) if ("%{8}") { (4) EXPAND %{8} (4) --> authtest (4) if ("%{8}") -> TRUE (4) if ("%{8}") { (4) update request { (4) EXPAND %{8} (4) --> authtest (4) &Called-Station-SSID := authtest (4) } # update request = noop (4) } # if ("%{8}") = noop (4) [updated] = updated (4) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (4) ... skipping else: Preceding "if" was taken (4) } # policy rewrite_called_station_id = updated (4) if (&outer.request) { (4) if (&outer.request) -> FALSE (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "th024", looking up realm NULL (4) suffix: Found realm "NULL" (4) suffix: Adding Stripped-User-Name = "th024" (4) suffix: Adding Realm = "NULL" (4) suffix: Authentication realm is LOCAL (4) [suffix] = ok (4) eap: Peer sent EAP Response (code 2) ID 5 length 144 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x46a6c18645a3d404 (4) eap: Finished EAP session with state 0x46a6c18645a3d404 (4) eap: Previous EAP request found for state 0x46a6c18645a3d404, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer indicated complete TLS record size will be 134 bytes (4) eap_ttls: Got complete TLS record (134 bytes) (4) eap_ttls: [eaptls verify] = length included (4) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (4) eap_ttls: TLS_accept: SSLv3 read client key exchange A (4) eap_ttls: TLS_accept: SSLv3 read certificate verify A (4) eap_ttls: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished (4) eap_ttls: TLS_accept: SSLv3 read finished A (4) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A (4) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished (4) eap_ttls: TLS_accept: SSLv3 write finished A (4) eap_ttls: TLS_accept: SSLv3 flush data (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: SSL Connection Established (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 69 (4) eap: EAP session adding &reply:State = 0x46a6c18642a0d404 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 37 from xxx.15.yyy.14:1812 to xxx.15.yyy.241:55854 length 0 (4) EAP-Message = 0x0106004515800000003b14030100010116030100303240e258cd986adaa2bbda1a2da15d769d1a334ab894470f674710e25a3f67e7f6397e3bffb69d6d47d6bfa8c6928a8f (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x46a6c18642a0d40457af669e53ad5d2c (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 148 from xxx.15.yyy.241:55854 to xxx.15.yyy.14:1812 length 225 (5) User-Name = "th024" (5) NAS-IP-Address = 10.yyy.0.241 (5) NAS-Port = 12289 (5) Called-Station-Id = "08-35-71-F2-CE-05:authtest" (5) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (5) Framed-MTU = 1250 (5) NAS-Port-Type = Wireless-802.11 (5) Framed-Compression = None (5) Connect-Info = "CONNECT 802.11g" (5) Chargeable-User-Identity = 0x00 (5) EAP-Message = 0x0206003f15800000003517030100301a984ec110c3bb68b953172a79f29ef21ff2ba9yyy68fc10a172e5ebc316f70c55ddf7019f76a685ce76fc455707689a (5) State = 0x46a6c18642a0d40457af669e53ad5d2c (5) Message-Authenticator = 0xd0bb1ebd3339a2e661b8006683038ae3 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy rewrite_called_station_id { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> 08-35-71-F2-CE-05 (5) &Called-Station-Id := 08-35-71-F2-CE-05 (5) } # update request = noop (5) if ("%{8}") { (5) EXPAND %{8} (5) --> authtest (5) if ("%{8}") -> TRUE (5) if ("%{8}") { (5) update request { (5) EXPAND %{8} (5) --> authtest (5) &Called-Station-SSID := authtest (5) } # update request = noop (5) } # if ("%{8}") = noop (5) [updated] = updated (5) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_called_station_id = updated (5) if (&outer.request) { (5) if (&outer.request) -> FALSE (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "th024", looking up realm NULL (5) suffix: Found realm "NULL" (5) suffix: Adding Stripped-User-Name = "th024" (5) suffix: Adding Realm = "NULL" (5) suffix: Authentication realm is LOCAL (5) [suffix] = ok (5) eap: Peer sent EAP Response (code 2) ID 6 length 63 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x46a6c18642a0d404 (5) eap: Finished EAP session with state 0x46a6c18642a0d404 (5) eap: Previous EAP request found for state 0x46a6c18642a0d404, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: Peer indicated complete TLS record size will be 53 bytes (5) eap_ttls: Got complete TLS record (53 bytes) (5) eap_ttls: [eaptls verify] = length included (5) eap_ttls: [eaptls process] = ok (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: EAP-Message = 0x0206000a017468303234 (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Got tunneled identity of th024 (5) eap_ttls: Setting default EAP type for tunneled EAP session (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x0206000a017468303234 (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "th024" (5) NAS-IP-Address = 10.yyy.0.241 (5) NAS-Port = 12289 (5) Called-Station-Id := "08-35-71-F2-CE-05" (5) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (5) Framed-MTU = 1250 (5) NAS-Port-Type = Wireless-802.11 (5) Framed-Compression = None (5) Connect-Info = "CONNECT 802.11g" (5) Chargeable-User-Identity = 0x00 (5) Event-Timestamp = "Jul 29 2019 17:56:44 JST" (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (5) authorize { (5) policy rewrite_called_station_id { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> 08-35-71-F2-CE-05 (5) &Called-Station-Id := 08-35-71-F2-CE-05 (5) } # update request = noop (5) if ("%{8}") { (5) EXPAND %{8} (5) --> (5) if ("%{8}") -> FALSE (5) [updated] = updated (5) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_called_station_id = updated (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "th024", looking up realm NULL (5) suffix: Found realm "NULL" (5) suffix: Adding Stripped-User-Name = "th024" (5) suffix: Adding Realm = "NULL" (5) suffix: Authentication realm is LOCAL (5) [suffix] = ok (5) eap: Peer sent EAP Response (code 2) ID 6 length 10 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: Issuing Challenge (5) eap: Sending EAP Request (code 1) ID 7 length 43 (5) eap: EAP session adding &reply:State = 0xfbde110bfbd90bbd (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x0107002b1a0107002610cc7d62352d43af8903cb9774d8f41cd4667265657261646975732d332e302e3xxx (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xfbde110bfbd90bbdc75e0d878f7aa032 (5) eap_ttls: Got tunneled Access-Challenge (5) eap: Sending EAP Request (code 1) ID 7 length 95 (5) eap: EAP session adding &reply:State = 0x46a6c18643a1d404 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 148 from xxx.15.yyy.14:1812 to xxx.15.yyy.241:55854 length 0 (5) EAP-Message = 0x0107005f15800000005517030100503787bc04a1426399cfb148305da6fc37ee2f8790c28013d69014d17723671eea29e1257aa737b44ad15571a708139a7c0467266d87298abc438961d393b42de373cde4076272fd3f6b436a683410a7d6 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x46a6c18643a1d40457af669e53ad5d2c (5) Finished request Waking up in 1.8 seconds. (6) Received Access-Request Id 151 from xxx.15.yyy.241:55854 to xxx.15.yyy.14:1812 length 273 (6) User-Name = "th024" (6) NAS-IP-Address = 10.yyy.0.241 (6) NAS-Port = 12289 (6) Called-Station-Id = "08-35-71-F2-CE-05:authtest" (6) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (6) Framed-MTU = 1250 (6) NAS-Port-Type = Wireless-802.11 (6) Framed-Compression = None (6) Connect-Info = "CONNECT 802.11g" (6) Chargeable-User-Identity = 0x00 (6) EAP-Message = 0x0207006f158000000065170301006000e9dbff18b4c2d8a45132942a2975644ce8fa7d17062d68f18af0ed6596467f0a6ed3ddfa222f8b0cf640adcdc9d42e9e1ab2f00f4cdeb5d38db4b85533cecb8fe15a6bf5f9cc0adba5b73c9df42fdfd7233281640ee4f8aae93f460f4cb1bb (6) State = 0x46a6c18643a1d40457af669e53ad5d2c (6) Message-Authenticator = 0xbe5980e68b5629dc4d12394032d28537 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy rewrite_called_station_id { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> 08-35-71-F2-CE-05 (6) &Called-Station-Id := 08-35-71-F2-CE-05 (6) } # update request = noop (6) if ("%{8}") { (6) EXPAND %{8} (6) --> authtest (6) if ("%{8}") -> TRUE (6) if ("%{8}") { (6) update request { (6) EXPAND %{8} (6) --> authtest (6) &Called-Station-SSID := authtest (6) } # update request = noop (6) } # if ("%{8}") = noop (6) [updated] = updated (6) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_called_station_id = updated (6) if (&outer.request) { (6) if (&outer.request) -> FALSE (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "th024", looking up realm NULL (6) suffix: Found realm "NULL" (6) suffix: Adding Stripped-User-Name = "th024" (6) suffix: Adding Realm = "NULL" (6) suffix: Authentication realm is LOCAL (6) [suffix] = ok (6) eap: Peer sent EAP Response (code 2) ID 7 length 111 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xfbde110bfbd90bbd (6) eap: Finished EAP session with state 0x46a6c18643a1d404 (6) eap: Previous EAP request found for state 0x46a6c18643a1d404, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: Peer indicated complete TLS record size will be 101 bytes (6) eap_ttls: Got complete TLS record (101 bytes) (6) eap_ttls: [eaptls verify] = length included (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x020700401a0207003b310a0e2b4f7314f1193516664add98c7f800000000000000000a50762cd4bbcf72a02c81b65b152499c3d57d156490cb35007468303234 (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x020700401a0207003b310a0e2b4f7314f1193516664add98c7f800000000000000000a50762cd4bbcf72a02c81b65b152499c3d57d156490cb35007468303234 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "th024" (6) State = 0xfbde110bfbd90bbdc75e0d878f7aa032 (6) NAS-IP-Address = 10.yyy.0.241 (6) NAS-Port = 12289 (6) Called-Station-Id := "08-35-71-F2-CE-05" (6) Calling-Station-Id = "50-3E-AA-6D-ED-7E" (6) Framed-MTU = 1250 (6) NAS-Port-Type = Wireless-802.11 (6) Framed-Compression = None (6) Connect-Info = "CONNECT 802.11g" (6) Chargeable-User-Identity = 0x00 (6) Event-Timestamp = "Jul 29 2019 17:56:44 JST" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy rewrite_called_station_id { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> 08-35-71-F2-CE-05 (6) &Called-Station-Id := 08-35-71-F2-CE-05 (6) } # update request = noop (6) if ("%{8}") { (6) EXPAND %{8} (6) --> (6) if ("%{8}") -> FALSE (6) [updated] = updated (6) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_called_station_id = updated (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "th024", looking up realm NULL (6) suffix: Found realm "NULL" (6) suffix: Adding Stripped-User-Name = "th024" (6) suffix: Adding Realm = "NULL" (6) suffix: Authentication realm is LOCAL (6) [suffix] = ok (6) eap: Peer sent EAP Response (code 2) ID 7 length 64 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) if (&outer.request:NAS-IP-Address == "210.151.94.178" || &outer.request:NAS-IP-Address == "210.151.94.186") { (6) if (&outer.request:NAS-IP-Address == "210.151.94.178" || &outer.request:NAS-IP-Address == "210.151.94.186") -> FALSE (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[1-2]{1}$/) { (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[1-2]{1}$/) -> FALSE (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[3-5]{1}$/) { (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[3-5]{1}$/) -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.3") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.3") -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.yyy") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.yyy") -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.4") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.4") -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.10") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.10") -> FALSE (6) if (&outer.request:NAS-IP-Address =~ /^10\.yyy\.0\.24[1]{1}$/ || &outer.request:NAS-IP-Address == "xxx.15.yyy.14" || &outer.request:NAS-IP-Address == "localhost") { (6) if (&outer.request:NAS-IP-Address =~ /^10\.yyy\.0\.24[1]{1}$/ || &outer.request:NAS-IP-Address == "xxx.15.yyy.14" || &outer.request:NAS-IP-Address == "localhost") -> TRUE (6) if (&outer.request:NAS-IP-Address =~ /^10\.yyy\.0\.24[1]{1}$/ || &outer.request:NAS-IP-Address == "xxx.15.yyy.14" || &outer.request:NAS-IP-Address == "localhost") { (6) if (&outer.request:Called-Station-SSID == 'authtest') { (6) if (&outer.request:Called-Station-SSID == 'authtest') -> TRUE (6) if (&outer.request:Called-Station-SSID == 'authtest') { (6) if (&Realm == "NULL" || &Realm == "edu.hoge.ac.jp" || &Realm == "edu.fuga.hoge.ac.jp" || &Realm == "hoge.ac.jp" || &Realm == "hoge.jp") { (6) if (&Realm == "NULL" || &Realm == "edu.hoge.ac.jp" || &Realm == "edu.fuga.hoge.ac.jp" || &Realm == "hoge.ac.jp" || &Realm == "hoge.jp") -> TRUE (6) if (&Realm == "NULL" || &Realm == "edu.hoge.ac.jp" || &Realm == "edu.fuga.hoge.ac.jp" || &Realm == "hoge.ac.jp" || &Realm == "hoge.jp") { rlm_ldap (ldap_regularusers): Reserved connection (0) (6) ldap_regularusers: EXPAND (&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=%{%{Stripped-User-Name}:-%{User-Name}})) (6) ldap_regularusers: --> (&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=th024)) (6) ldap_regularusers: Performing search in "ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp" with filter "(&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=th024))", scope "sub" (6) ldap_regularusers: Waiting for search result... (6) ldap_regularusers: User object found at DN "uid=th024,ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp" (6) ldap_regularusers: Processing user attributes (6) ldap_regularusers: control:NT-Password := 0x3046333142354642414438363645678984145464242433837343944384141 rlm_ldap (ldap_regularusers): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap_regularusers): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap_regularusers): Connecting to ldaps://ldap.edu.hoge.ac.jp:636 rlm_ldap (ldap_regularusers): Waiting for bind result... rlm_ldap (ldap_regularusers): Bind successful (6) [ldap_regularusers] = updated (6) update control { (6) &Auth-Type := LDAP (6) } # update control = noop (6) update reply { (6) Executing: /usr/sbin/ldapvlan th024: (6) Program returned code (0) and output '64' (6) EXPAND %{exec:/usr/sbin/ldapvlan %{User-Name}} (6) --> 64 (6) &Tunnel-Private-Group-Id := 64 (6) } # update reply = noop (6) } # if (&Realm == "NULL" || &Realm == "edu.hoge.ac.jp" || &Realm == "edu.fuga.hoge.ac.jp" || &Realm == "hoge.ac.jp" || &Realm == "hoge.jp") = updated (6) } # if (&outer.request:Called-Station-SSID == 'authtest') = updated (6) } # if (&outer.request:NAS-IP-Address =~ /^10\.yyy\.0\.24[1]{1}$/ || &outer.request:NAS-IP-Address == "xxx.15.yyy.14" || &outer.request:NAS-IP-Address == "localhost") = updated (6) [expiration] = noop (6) [logintime] = noop (6) } # authorize = updated (6) Found Auth-Type = LDAP (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) Auth-Type LDAP { (6) if (&outer.request:NAS-IP-Address == "210.151.94.178" || &outer.request:NAS-IP-Address == "210.151.94.186") { (6) if (&outer.request:NAS-IP-Address == "210.151.94.178" || &outer.request:NAS-IP-Address == "210.151.94.186") -> FALSE (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[1-2]{1}$/) { (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[1-2]{1}$/) -> FALSE (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[3-5]{1}$/) { (6) elsif (&outer.request:NAS-IP-Address =~ /^xxx\.15\.yyy\.24[3-5]{1}$/) -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.3") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.3") -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.yyy") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.yyy") -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.4") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.4") -> FALSE (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.10") { (6) elsif (&outer.request:NAS-IP-Address == "xxx.15.yyy.10") -> FALSE (6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG. DELETE IT. (6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: ERROR: Attribute "User-Password" is required for authentication (6) [ldap_regularusers] = invalid (6) } # Auth-Type LDAP = invalid (6) Failed to authenticate the user (6) EXPAND %{control:Auth-Type};%{%{outer.request:Calling-Station-Id}:-%{Calling-Station-Id}};%{Called-Station-Id};%{Connect-Info};%{Fortinet-Vdom-Name};%{NAS-Identifier};%{Framed-IP-Address};%{request:User-Name} (6) --> LDAP;50-3E-AA-6D-ED-7E;08-35-71-F2-CE-05;CONNECT 802.11g;;;;th024 (6) Login incorrect (ldap_regularusers: Attribute "User-Password" is required for authentication): [th024] (from client netwlc01 port 12289 cli 50-3E-AA-6D-ED-7E via TLS tunnel) LDAP;50-3E-AA-6D-ED-7E;08-35-71-F2-CE-05;CONNECT 802.11g;;;;th024 (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> th024 (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'ldap_regularusers: Attribute "User-Password" is required for authentication' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) eap_ttls: Got tunneled Access-Reject (6) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 7 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) EXPAND %{control:Auth-Type};%{%{outer.request:Calling-Station-Id}:-%{Calling-Station-Id}};%{Called-Station-Id};%{Connect-Info};%{Fortinet-Vdom-Name};%{NAS-Identifier};%{Framed-IP-Address};%{request:User-Name} (6) --> eap;50-3E-AA-6D-ED-7E;08-35-71-F2-CE-05;CONNECT 802.11g;;;;th024 (6) Login incorrect (eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed): [th024] (from client netwlc01 port 12289 cli 50-3E-AA-6D-ED-7E) eap;50-3E-AA-6D-ED-7E;08-35-71-F2-CE-05;CONNECT 802.11g;;;;th024 (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> th024 (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 151 from xxx.15.yyy.14:1812 to xxx.15.yyy.241:55854 length 44 (6) EAP-Message = 0x04070004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.7 seconds. (0) Cleaning up request packet ID 22 with timestamp +27 (1) Cleaning up request packet ID 26 with timestamp +27 (2) Cleaning up request packet ID 30 with timestamp +27 (3) Cleaning up request packet ID 34 with timestamp +27 (4) Cleaning up request packet ID 37 with timestamp +27 Waking up in 2.8 seconds. (5) Cleaning up request packet ID 148 with timestamp +30 (6) Cleaning up request packet ID 151 with timestamp +30 Ready to process requests
On Jul 30, 2019, at 10:53 AM, Yuya Yanagi <peacefull64@gmail.com> wrote:
I'm sorry, my English is not good.
It's fine.
I am migrating a FreeRadius server, but I'm having trouble connecting with EAP-TTLS + MS-CHAPv2.
The migration source is FreeRadius v2, but this time it is a migration to FreeRadius v3. Although the configuration is a straight migration, some settings have been added as dynamic VLAN is required. At first we recommended to build with EAP-TTLS + PAP, but customers are required to connect with EAP-TTLS + MS-CHAPv2 When EAP-TTLS + PAP, although authentication was successful, it will be an error if it is made EAP-TTLS + MS-CHAPv2 connection.
Yes.
Specifically, I get into trouble with the following error at the point of authenticate section. ------ (6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG. DELETE IT. (6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: ERROR: Attribute "User-Password" is required for authentication ------
That should be clear: 1) don't set Auth-Type := LDAP 2) get the password from LDAP and let FreeRADIUS do the authentication. LDAP servers don't do MS-CHAPv2. If the LDAP server is Active Directory, then you need to follow my guide: http://deployingradius.com/documents/configuration/active_directory.html
As a question and support
1. Can I authenticate using EAP-TTLS + MS-CHAPv2?
Yes. See above. But not with "Auth-Type := LDAP" Alan DeKok.
Alan Thank you for your reply. The LDAP server uses OpenLDAP. Authentication of Wifi_AP and wired LAN does not use AD. The attribute about the user is set to OpenLDAP. The migration source passes authentication with MS-CHAPv2, but Maybe you should choose MS-Chapv2? 2019-07-30 23:57 GMT+09:00, Alan DeKok <aland@deployingradius.com>:
On Jul 30, 2019, at 10:53 AM, Yuya Yanagi <peacefull64@gmail.com> wrote:
I'm sorry, my English is not good.
It's fine.
I am migrating a FreeRadius server, but I'm having trouble connecting with EAP-TTLS + MS-CHAPv2.
The migration source is FreeRadius v2, but this time it is a migration to FreeRadius v3. Although the configuration is a straight migration, some settings have been added as dynamic VLAN is required. At first we recommended to build with EAP-TTLS + PAP, but customers are required to connect with EAP-TTLS + MS-CHAPv2 When EAP-TTLS + PAP, although authentication was successful, it will be an error if it is made EAP-TTLS + MS-CHAPv2 connection.
Yes.
Specifically, I get into trouble with the following error at the point of authenticate section. ------ (6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG. DELETE IT. (6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING (6) ldap_regularusers: WARNING: ********************************************* (6) ldap_regularusers: ERROR: Attribute "User-Password" is required for authentication ------
That should be clear:
1) don't set Auth-Type := LDAP 2) get the password from LDAP and let FreeRADIUS do the authentication. LDAP servers don't do MS-CHAPv2.
If the LDAP server is Active Directory, then you need to follow my guide:
http://deployingradius.com/documents/configuration/active_directory.html
As a question and support
1. Can I authenticate using EAP-TTLS + MS-CHAPv2?
Yes. See above. But not with "Auth-Type := LDAP"
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Jul 30, 2019, at 11:06 AM, Yuya Yanagi <peacefull64@gmail.com> wrote:
Thank you for your reply.
The LDAP server uses OpenLDAP.
Then the database needs to supply a Cleartext-Password to FreeRAIDUS.
Authentication of Wifi_AP and wired LAN does not use AD.
The attribute about the user is set to OpenLDAP.
OK. How are the passwords stored in LDAP? Clear text? crypt? Some other method? Only Clear text passwords and NT hashed passwords are compatible with MS-CHAPv2.
The migration source passes authentication with MS-CHAPv2, but Maybe you should choose MS-Chapv2?
They're the same thing. Alan DeKok.
Alan
OK.
How are the passwords stored in LDAP? Clear text? crypt? Some other method?
The content of the attribute that holds the LDAP password is encrypted. Apart from that, there is also an attribute that has an unencrypted password, but since it is dangerous if it is described in the log etc, encryption is used instead. It is unclear whether this encrypted password is an NT hashed password, so I will check it. 2019-07-31 0:08 GMT+09:00, Alan DeKok <aland@deployingradius.com>:
On Jul 30, 2019, at 11:06 AM, Yuya Yanagi <peacefull64@gmail.com> wrote:
Thank you for your reply.
The LDAP server uses OpenLDAP.
Then the database needs to supply a Cleartext-Password to FreeRAIDUS.
Authentication of Wifi_AP and wired LAN does not use AD.
The attribute about the user is set to OpenLDAP.
OK.
How are the passwords stored in LDAP? Clear text? crypt? Some other method?
Only Clear text passwords and NT hashed passwords are compatible with MS-CHAPv2.
The migration source passes authentication with MS-CHAPv2, but Maybe you should choose MS-Chapv2?
They're the same thing.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi Alan I confirmed the following questions. Passwords stored in LDAP were encrypted with NT hash password.
The LDAP server uses OpenLDAP.
Then the database needs to supply a Cleartext-Password to FreeRAIDUS.
Authentication of Wifi_AP and wired LAN does not use AD.
The attribute about the user is set to OpenLDAP.
OK.
How are the passwords stored in LDAP? Clear text? crypt? Some other method?
Only Clear text passwords and NT hashed passwords are compatible with MS-CHAPv2.
2019-07-31 0:15 GMT+09:00, Yuya Yanagi <peacefull64@gmail.com>:
Alan
OK.
How are the passwords stored in LDAP? Clear text? crypt? Some other method?
The content of the attribute that holds the LDAP password is encrypted. Apart from that, there is also an attribute that has an unencrypted password, but since it is dangerous if it is described in the log etc, encryption is used instead.
It is unclear whether this encrypted password is an NT hashed password, so I will check it.
2019-07-31 0:08 GMT+09:00, Alan DeKok <aland@deployingradius.com>:
On Jul 30, 2019, at 11:06 AM, Yuya Yanagi <peacefull64@gmail.com> wrote:
Thank you for your reply.
The LDAP server uses OpenLDAP.
Then the database needs to supply a Cleartext-Password to FreeRAIDUS.
Authentication of Wifi_AP and wired LAN does not use AD.
The attribute about the user is set to OpenLDAP.
OK.
How are the passwords stored in LDAP? Clear text? crypt? Some other method?
Only Clear text passwords and NT hashed passwords are compatible with MS-CHAPv2.
The migration source passes authentication with MS-CHAPv2, but Maybe you should choose MS-Chapv2?
They're the same thing.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (2)
-
Alan DeKok -
Yuya Yanagi