We are using the Cisco ACS 5.3 as a RADIUS for database authentication and authorization. The purpose is to authenticate incoming users based on the NAS-PORT-ID. The problem is that we cannot find any solution for the Service Router (Alcatel 7750) to send the NAS-PORT-ID to act as USERNAME. The username field is set to the MAC address. The ACS requires a USERNAME and there is not a way to manipulate the User-Name value once it is received. We heard that it could be possible to use the freeradius to act
We are using the Cisco ACS 5.3 as a RADIUS for database authentication and authorization. The purpose is to authenticate incoming users based on the NAS-PORT-ID. The problem is that we cannot find any solution for the Service Router (Alcatel 7750) to send the NAS-PORT-ID to act as USERNAME. The username field is set to the MAC address. The ACS requires a USERNAME and there is not a way to manipulate the User-Name value once it is received. We heard that it could be possible to use the freeradius to act as a proxy for the Cisco secure ACS. This is what we want: User --> [SR] --> User-Name = “MAC:xx.xx.xx.xx” Password = “secret” NAS-Port-Id = 1/1/4.1001.129 --> [FR] --> User-Name = “1/1/4.1001.129” Password = “secret” --> [ACS 5.3] Is there a solution for this option in the Freeradius? Is there a way to manipulate the User-Name sent from the service router, (MAC address), and change it to its NAS-Port-Id before it reaches the ACS RADIUS with help from the freeradius acting as a proxy? -- View this message in context: http://freeradius.1045715.n5.nabble.com/We-are-using-the-Cisco-ACS-5-3-as-a-... Sent from the FreeRadius - User mailing list archive at Nabble.com.
Next time put something in subject so we can know something about your problem... :) On 25.4.2012 15:03, Xbert_badstuber wrote:
We are using the Cisco ACS 5.3 as a RADIUS for database authentication and authorization. The purpose is to authenticate incoming users based on the NAS-PORT-ID. The problem is that we cannot find any solution for the Service Router (Alcatel 7750) to send the NAS-PORT-ID to act as USERNAME. The username field is set to the MAC address.
The ACS requires a USERNAME and there is not a way to manipulate the User-Name value once it is received. We heard that it could be possible to use the freeradius to act as a proxy for the Cisco secure ACS.
This is what we want:
User --> [SR] --> User-Name = “MAC:xx.xx.xx.xx” Password = “secret” NAS-Port-Id = 1/1/4.1001.129 --> [FR] --> User-Name = “1/1/4.1001.129” Password = “secret” --> [ACS 5.3]
Is there a solution for this option in the Freeradius?
Is there a way to manipulate the User-Name sent from the service router, (MAC address), and change it to its NAS-Port-Id before it reaches the ACS RADIUS with help from the freeradius acting as a proxy?
-- View this message in context: http://freeradius.1045715.n5.nabble.com/We-are-using-the-Cisco-ACS-5-3-as-a-... Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hehe, yes i know... :) That became a little bit wrong... ;) -- View this message in context: http://freeradius.1045715.n5.nabble.com/Re-We-are-using-the-Cisco-ACS-5-3-as... Sent from the FreeRadius - User mailing list archive at Nabble.com.
participants (2)
-
Marinko Tarlać -
Xbert_badstuber