Freeradius 3.0.17 EAP-TLS Authentication with LDAP Authorization
Hello all I have followed previous advice given to me and upgraded my install to FreeRADIUS 3.0.17 . I am trying to achieve a setup where computers are let onto company internet via eap-tls and then are separated into VLANS with ldap after this. Currently I believe I have eap-tls working as my eapol test has been successful. However after adding in the ldap module I am getting a bind error which I know is an LDAP error and not a freeradius one. I was hoping someone here could take a look at my debug info and see if I have overlooked anything. Thank you in advance for the help. I also refrenced this previous thread to help out with some of the configs http://freeradius.1045715.n5.nabble.com/Freeradius-3-x-with-LDAP-authenticat.... FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/ldap including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/passwd including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client kevintest { ipaddr = 172.17.17.227 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_detail # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_exec # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=DOMAIN.net --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_ldap # Loading module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap ldap { server = "Domain.net" identity = "cn=ldap.query,ou=service.accounts,ou=Users,ou=operations,ou=departments,dc=Domain,dc=net" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=Domain,dc=net" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } instantiate { } # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "HIGH" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no tmpdir = "/tmp/radiusd" client = "/usr/bin/openssl verify -CApath /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename}" } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20442 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:332 } # server inner-tunnel server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 36409 Listening on proxy address :: port 64651 Ready to process requests (0) Received Access-Request Id 0 from 127.0.0.1:36789 to 127.0.0.1:1812 length 134 (0) User-Name = "client.pem" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200000f01636c69656e742e70656d (0) Message-Authenticator = 0xd00906a3d0648e3a771145edfd1b9f36 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (0) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (0) auth_log: EXPAND %t (0) auth_log: --> Tue Aug 21 19:09:39 2018 (0) [auth_log] = ok (0) eap: Peer sent EAP Response (code 2) ID 0 length 15 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_tls to process data (0) eap_tls: Initiating new EAP-TLS session (0) eap_tls: Setting verify mode to require certificate from client (0) eap_tls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0x8db2a5328db3a858 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (0) EAP-Message = 0x010100060d20 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x8db2a5328db3a858fbbf5fa81909ec3c (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 127.0.0.1:36789 to 127.0.0.1:1812 length 446 (1) User-Name = "client.pem" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x020101330d0016030101280100012403039c4469b54ea5c4edd45618780c24fa5ca5f8897d2e475569a1553c51469fb9470000aac030c02cc028c024c014c00a00a500a300a1009f006b006a0069006800390038003700360088008700860085c032c02ec02ac026c00fc005009d003d00350084c02fc0 (1) State = 0x8db2a5328db3a858fbbf5fa81909ec3c (1) Message-Authenticator = 0xae86ca804883a58af655d7ad8ce39609 (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (1) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (1) auth_log: EXPAND %t (1) auth_log: --> Tue Aug 21 19:09:39 2018 (1) [auth_log] = ok (1) eap: Peer sent EAP Response (code 2) ID 1 length 307 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry DEFAULT at line 1 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x8db2a5328db3a858 (1) eap: Finished EAP session with state 0x8db2a5328db3a858 (1) eap: Previous EAP request found for state 0x8db2a5328db3a858, released from the list (1) eap: Peer sent packet with method EAP TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: Continuing EAP-TLS (1) eap_tls: Got final TLS record fragment (301 bytes) (1) eap_tls: WARNING: Total received TLS record fragments (301 bytes), does not equal indicated TLS record length (0 bytes) (1) eap_tls: [eaptls verify] = ok (1) eap_tls: Done initial handshake (1) eap_tls: (other): before/accept initialization (1) eap_tls: TLS_accept: before/accept initialization (1) eap_tls: <<< recv TLS 1.2 [length 0128] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 003e] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 0885] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 014d] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 00b6] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: TLS_accept: unknown state (1) eap_tls: TLS_accept: Need to read more data: unknown state (1) eap_tls: TLS_accept: Need to read more data: unknown state (1) eap_tls: In SSL Handshake Phase (1) eap_tls: In SSL Accept mode (1) eap_tls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1024 (1) eap: EAP session adding &reply:State = 0x8db2a5328cb0a858 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (1) EAP-Message = 0x010204000dc000000ada160303003e0200003a03031b79870f786030224aafaf12faf3cb11780b455b25fcdd8f3be3c65bd5d54eb400c030000012ff01000100000b000403000102000f00010116030308850b00088100087e0003c0308203bc308202a4a003020102020101300d06092a864886f70d01 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x8db2a5328cb0a858fbbf5fa81909ec3c (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 2 from 127.0.0.1:36789 to 127.0.0.1:1812 length 143 (2) User-Name = "client.pem" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x020200060d00 (2) State = 0x8db2a5328cb0a858fbbf5fa81909ec3c (2) Message-Authenticator = 0x09374abbc754eba45442ae669e219bc7 (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (2) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (2) auth_log: EXPAND %t (2) auth_log: --> Tue Aug 21 19:09:39 2018 (2) [auth_log] = ok (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) files: users: Matched entry DEFAULT at line 1 (2) [files] = ok (2) [expiration] = noop (2) [logintime] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x8db2a5328cb0a858 (2) eap: Finished EAP session with state 0x8db2a5328cb0a858 (2) eap: Previous EAP request found for state 0x8db2a5328cb0a858, released from the list (2) eap: Peer sent packet with method EAP TLS (13) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: Continuing EAP-TLS (2) eap_tls: Peer ACKed our handshake fragment (2) eap_tls: [eaptls verify] = request (2) eap_tls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1024 (2) eap: EAP session adding &reply:State = 0x8db2a5328fb1a858 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (2) EAP-Message = 0x010304000dc000000ada3fc6f74e554b65096cf1c9576d66e5a1b19b053f667702d6acbfd8730004b8308204b43082039ca003020102020900c600a5ee176d055c300d06092a864886f70d01010b0500308183310b3009060355040613025553310b300906035504080c0257413113301106035504070c (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x8db2a5328fb1a858fbbf5fa81909ec3c (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 127.0.0.1:36789 to 127.0.0.1:1812 length 143 (3) User-Name = "client.pem" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x020300060d00 (3) State = 0x8db2a5328fb1a858fbbf5fa81909ec3c (3) Message-Authenticator = 0x32b0f0985f480c56b06736c57595844b (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (3) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (3) auth_log: EXPAND %t (3) auth_log: --> Tue Aug 21 19:09:39 2018 (3) [auth_log] = ok (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) files: users: Matched entry DEFAULT at line 1 (3) [files] = ok (3) [expiration] = noop (3) [logintime] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x8db2a5328fb1a858 (3) eap: Finished EAP session with state 0x8db2a5328fb1a858 (3) eap: Previous EAP request found for state 0x8db2a5328fb1a858, released from the list (3) eap: Peer sent packet with method EAP TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: Continuing EAP-TLS (3) eap_tls: Peer ACKed our handshake fragment (3) eap_tls: [eaptls verify] = request (3) eap_tls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 760 (3) eap: EAP session adding &reply:State = 0x8db2a5328eb6a858 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (3) EAP-Message = 0x010402f80d8000000adaa158fd0cacf5726c80718dfbaa6c75fa64462d6736903610eb5f1638a7ba7c925b858636296265568e5076bed345f273aaa1d83a2e064f5e6d266da1b233d94533b8803e497f4f37900c0cb829a3f04bc6d4b610dee50a8a47dad71eec9a5ba6538c81bf9bb7fae723a0a61b23 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x8db2a5328eb6a858fbbf5fa81909ec3c (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 4 from 127.0.0.1:36789 to 127.0.0.1:1812 length 1555 (4) User-Name = "client.pem" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x020405800dc000000a1316030308830b00087f00087c0003be308203ba308202a2a003020102020102300d06092a864886f70d01010b0500308183310b3009060355040613025553310b300906035504080c0257413113301106035504070c0a42656c6c696e6768616d31123010060355040a0c094661 (4) State = 0x8db2a5328eb6a858fbbf5fa81909ec3c (4) Message-Authenticator = 0x9073f436730652ec433ae776fd3f8183 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (4) auth_log: --> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (4) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (4) auth_log: EXPAND %t (4) auth_log: --> Tue Aug 21 19:09:39 2018 (4) [auth_log] = ok (4) eap: Peer sent EAP Response (code 2) ID 4 length 1408 (4) eap: No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) files: users: Matched entry DEFAULT at line 1 (4) [files] = ok (4) [expiration] = noop (4) [logintime] = noop (4) } # authorize = updated (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x8db2a5328eb6a858 (4) eap: Finished EAP session with state 0x8db2a5328eb6a858 (4) eap: Previous EAP request found for state 0x8db2a5328eb6a858, released from the list (4) eap: Peer sent packet with method EAP TLS (13) (4) eap: Calling submodule eap_tls to process data (4) eap_tls: Continuing EAP-TLS (4) eap_tls: Peer indicated complete TLS record size will be 2579 bytes (4) eap_tls: Expecting 2 TLS record fragments (4) eap_tls: Got first TLS record fragment (1398 bytes). Peer indicated more fragments to follow (4) eap_tls: [eaptls verify] = first fragment (4) eap_tls: ACKing Peer's TLS record fragment (4) eap_tls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 6 (4) eap: EAP session adding &reply:State = 0x8db2a53289b7a858 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (4) EAP-Message = 0x010500060d00 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x8db2a53289b7a858fbbf5fa81909ec3c (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 5 from 127.0.0.1:36789 to 127.0.0.1:1812 length 1332 (5) User-Name = "client.pem" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x020504a30d009fd708c7fc4135e2c21b17e472a506e56bec63fd54772c0a3de87ec11d4dac88eeaf28e4c60bb8d1437218453166810fe18d87ca8ea690e9b386b211e159030d338d9af4acfc6b71505764594c6c1b85eced7cf21301ca8c1eca8f2752f3c06098f8efcab9203bb480391976249f12e805 (5) State = 0x8db2a53289b7a858fbbf5fa81909ec3c (5) Message-Authenticator = 0x2b66063c58bd994f19a3dcc4fae8afdc (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log: --> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (5) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (5) auth_log: EXPAND %t (5) auth_log: --> Tue Aug 21 19:09:39 2018 (5) [auth_log] = ok (5) eap: Peer sent EAP Response (code 2) ID 5 length 1187 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry DEFAULT at line 1 (5) [files] = ok (5) [expiration] = noop (5) [logintime] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x8db2a53289b7a858 (5) eap: Finished EAP session with state 0x8db2a53289b7a858 (5) eap: Previous EAP request found for state 0x8db2a53289b7a858, released from the list (5) eap: Peer sent packet with method EAP TLS (13) (5) eap: Calling submodule eap_tls to process data (5) eap_tls: Continuing EAP-TLS (5) eap_tls: Got final TLS record fragment (1181 bytes) (5) eap_tls: [eaptls verify] = ok (5) eap_tls: Done initial handshake (5) eap_tls: <<< recv TLS 1.2 [length 0883] (5) eap_tls: Creating attributes from certificate OIDs (5) eap_tls: TLS-Cert-Serial := "c600a5ee176d055c" (5) eap_tls: TLS-Cert-Expiration := "181019201014Z" (5) eap_tls: TLS-Cert-Subject := "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest@email.com/CN=Radius Server" (5) eap_tls: TLS-Cert-Issuer := "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest@email.com/CN=Radius Server" (5) eap_tls: TLS-Cert-Common-Name := "Radius Server" (5) eap_tls: Creating attributes from certificate OIDs (5) eap_tls: TLS-Client-Cert-Serial := "02" (5) eap_tls: TLS-Client-Cert-Expiration := "181019201107Z" (5) eap_tls: TLS-Client-Cert-Subject := "/C=US/ST=WA/O=company/CN=kevin.test/emailAddress=kevin.test@email.com" (5) eap_tls: TLS-Client-Cert-Issuer := "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest@email.com/CN=Radius Server" (5) eap_tls: TLS-Client-Cert-Common-Name := "kevin.test" (5) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication" (5) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" (5) eap_tls: Verifying client certificate: /usr/bin/openssl verify -CApath /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename} (5) eap_tls: Executing: /usr/bin/openssl verify -CApath /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename}: (5) eap_tls: EXPAND %{TLS-Client-Cert-Filename} (5) eap_tls: --> /tmp/radiusd/radiusd.client.XX6sVjt9 (5) eap_tls: Program returned code (0) and output '/tmp/radiusd/radiusd.client.XX6sVjt9: OK' (5) eap_tls: Client certificate CN kevin.test passed external validation (5) eap_tls: TLS_accept: unknown state (5) eap_tls: <<< recv TLS 1.2 [length 0046] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: <<< recv TLS 1.2 [length 0108] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: <<< recv TLS 1.2 [length 0001] (5) eap_tls: <<< recv TLS 1.2 [length 0010] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: >>> send TLS 1.2 [length 0001] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: >>> send TLS 1.2 [length 0010] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: TLS_accept: unknown state (5) eap_tls: (other): SSL negotiation finished successfully (5) eap_tls: SSL Connection Established (5) eap_tls: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 6 length 61 (5) eap: EAP session adding &reply:State = 0x8db2a53288b4a858 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 5 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (5) EAP-Message = 0x0106003d0d80000000331403030001011603030028381c7e1783d65af09f05df42d3f1b2fed20f91d132889dc662acf7908c7b8dd2a1a9530889f2030a (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x8db2a53288b4a858fbbf5fa81909ec3c (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 6 from 127.0.0.1:36789 to 127.0.0.1:1812 length 143 (6) User-Name = "client.pem" (6) NAS-IP-Address = 127.0.0.1 (6) Calling-Station-Id = "02-00-00-00-00-01" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x020600060d00 (6) State = 0x8db2a53288b4a858fbbf5fa81909ec3c (6) Message-Authenticator = 0x3ffc0b16b3614022609b9f298eafda17 (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (6) auth_log: --> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (6) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20180821 (6) auth_log: EXPAND %t (6) auth_log: --> Tue Aug 21 19:09:39 2018 (6) [auth_log] = ok (6) eap: Peer sent EAP Response (code 2) ID 6 length 6 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry DEFAULT at line 1 (6) [files] = ok (6) [expiration] = noop (6) [logintime] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x8db2a53288b4a858 (6) eap: Finished EAP session with state 0x8db2a53288b4a858 (6) eap: Previous EAP request found for state 0x8db2a53288b4a858, released from the list (6) eap: Peer sent packet with method EAP TLS (13) (6) eap: Calling submodule eap_tls to process data (6) eap_tls: Continuing EAP-TLS (6) eap_tls: Peer ACKed our handshake fragment. handshake is finished (6) eap_tls: [eaptls verify] = success (6) eap_tls: [eaptls process] = success (6) eap: Sending EAP Success (code 3) ID 6 length 4 (6) eap: Freeing handler (6) [eap] = ok (6) } # authenticate = ok (6) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (6) post-auth { (6) update { (6) No attributes updated (6) } # update = noop (6) ldap: EXPAND . (6) ldap: --> . (6) ldap: EXPAND Authenticated at %S (6) ldap: --> Authenticated at 2018-08-21 19:09:39 rlm_ldap (ldap): Reserved connection (0) (6) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (samaccountname=client.pem) (6) ldap: Performing search in "dc=Domain,dc=net" with filter "(samaccountname=client.pem)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: ERROR: Failed performing search: Operations error with LDAP database. Please see the LDAP server configuration / documentation for more information. (6) ldap: ERROR: Server said: 000004DC: LdapErr: DSID-0C0907C2, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v2580. rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = fail (6) } # post-auth = fail (6) Using Post-Auth-Type Reject (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> client.pem (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 6 from 127.0.0.1:1812 to 127.0.0.1:36789 length 44 (6) EAP-Message = 0x03060004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +4 (1) Cleaning up request packet ID 1 with timestamp +4 (2) Cleaning up request packet ID 2 with timestamp +4 (3) Cleaning up request packet ID 3 with timestamp +4 (4) Cleaning up request packet ID 4 with timestamp +4 (5) Cleaning up request packet ID 5 with timestamp +4 (6) Cleaning up request packet ID 6 with timestamp +4 Ready to process requests From: Freeradius-Users <freeradius-users-bounces+kevin.virk=faithlife.com@lists.freeradius.org> on behalf of freeradius-users-request@lists.freeradius.org <freeradius-users-request@lists.freeradius.org> Sent: Tuesday, August 21, 2018 3:00 AM To: freeradius-users@lists.freeradius.org Subject: Freeradius-Users Digest, Vol 160, Issue 41 Send Freeradius-Users mailing list submissions to freeradius-users@lists.freeradius.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request@lists.freeradius.org You can reach the person managing the list at freeradius-users-owner@lists.freeradius.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..." Today's Topics: 1. Re: Re: Apache with mod_auth_radius starts X requests (Fajar A. Nugraha) ---------------------------------------------------------------------- Message: 1 Date: Tue, 21 Aug 2018 16:25:50 +0700 From: "Fajar A. Nugraha" <list@fajar.net> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: Re: Apache with mod_auth_radius starts X requests Message-ID: <CAG1y0sda1T+K+gGYotwihfd+Ly2RLkPrZd_fCt2Ciiz31q-jQQ@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Tue, Aug 21, 2018 at 4:22 PM, Carsten Schulze < carsten.schulze@leuphana.de> wrote:
Hi,
to finalize.
I installed a PHP Directory Listner to that folder, with that, only one request was generated.
If its not possible, you can reduce the index.* (checks) in apache, which will reduce the total amount of Radius-Reuqests.
/etc/apache2/mods-enabled/dir.conf <IfModule mod_dir.c> #DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm DirectoryIndex index.php </IfModule>
Isn't that basically what https://github.com/FreeRADIUS/mod_auth_radius#4-some-warnings says? -- Fajar ------------------------------ Subject: Digest Footer - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------ End of Freeradius-Users Digest, Vol 160, Issue 41 *************************************************
Are you sure client.pem is right username to ldap search? — вт, 21 авг. 2018 г. в 22:30, Kevin Virk <Kevin.Virk@faithlife.com>:
Hello all I have followed previous advice given to me and upgraded my install to FreeRADIUS 3.0.17 . I am trying to achieve a setup where computers are let onto company internet via eap-tls and then are separated into VLANS with ldap after this. Currently I believe I have eap-tls working as my eapol test has been successful. However after adding in the ldap module I am getting a bind error which I know is an LDAP error and not a freeradius one. I was hoping someone here could take a look at my debug info and see if I have overlooked anything. Thank you in advance for the help. I also refrenced this previous thread to help out with some of the configs http://freeradius.1045715.n5.nabble.com/Freeradius-3-x-with-LDAP-authenticat... .
FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/ldap including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/passwd including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client kevintest { ipaddr = 172.17.17.227 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_detail # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_exec # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=DOMAIN.net --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_ldap # Loading module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap ldap { server = "Domain.net" identity = "cn=ldap.query,ou=service.accounts,ou=Users,ou=operations,ou=departments,dc=Domain,dc=net" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=Domain,dc=net" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } instantiate { } # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "HIGH" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no tmpdir = "/tmp/radiusd" client = "/usr/bin/openssl verify -CApath /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename}" } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20442 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:332 } # server inner-tunnel server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 36409 Listening on proxy address :: port 64651 Ready to process requests (0) Received Access-Request Id 0 from 127.0.0.1:36789 to 127.0.0.1:1812 length 134 (0) User-Name = "client.pem" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200000f01636c69656e742e70656d (0) Message-Authenticator = 0xd00906a3d0648e3a771145edfd1b9f36 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (0) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (0) auth_log: EXPAND %t (0) auth_log: --> Tue Aug 21 19:09:39 2018 (0) [auth_log] = ok (0) eap: Peer sent EAP Response (code 2) ID 0 length 15 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_tls to process data (0) eap_tls: Initiating new EAP-TLS session (0) eap_tls: Setting verify mode to require certificate from client (0) eap_tls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0x8db2a5328db3a858 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (0) EAP-Message = 0x010100060d20 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x8db2a5328db3a858fbbf5fa81909ec3c (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 127.0.0.1:36789 to 127.0.0.1:1812 length 446 (1) User-Name = "client.pem" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x020101330d0016030101280100012403039c4469b54ea5c4edd45618780c24fa5ca5f8897d2e475569a1553c51469fb9470000aac030c02cc028c024c014c00a00a500a300a1009f006b006a0069006800390038003700360088008700860085c032c02ec02ac026c00fc005009d003d00350084c02fc0 (1) State = 0x8db2a5328db3a858fbbf5fa81909ec3c (1) Message-Authenticator = 0xae86ca804883a58af655d7ad8ce39609 (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (1) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (1) auth_log: EXPAND %t (1) auth_log: --> Tue Aug 21 19:09:39 2018 (1) [auth_log] = ok (1) eap: Peer sent EAP Response (code 2) ID 1 length 307 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry DEFAULT at line 1 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x8db2a5328db3a858 (1) eap: Finished EAP session with state 0x8db2a5328db3a858 (1) eap: Previous EAP request found for state 0x8db2a5328db3a858, released from the list (1) eap: Peer sent packet with method EAP TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: Continuing EAP-TLS (1) eap_tls: Got final TLS record fragment (301 bytes) (1) eap_tls: WARNING: Total received TLS record fragments (301 bytes), does not equal indicated TLS record length (0 bytes) (1) eap_tls: [eaptls verify] = ok (1) eap_tls: Done initial handshake (1) eap_tls: (other): before/accept initialization (1) eap_tls: TLS_accept: before/accept initialization (1) eap_tls: <<< recv TLS 1.2 [length 0128] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 003e] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 0885] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 014d] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: >>> send TLS 1.2 [length 00b6] (1) eap_tls: TLS_accept: unknown state (1) eap_tls: TLS_accept: unknown state (1) eap_tls: TLS_accept: Need to read more data: unknown state (1) eap_tls: TLS_accept: Need to read more data: unknown state (1) eap_tls: In SSL Handshake Phase (1) eap_tls: In SSL Accept mode (1) eap_tls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1024 (1) eap: EAP session adding &reply:State = 0x8db2a5328cb0a858 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (1) EAP-Message = 0x010204000dc000000ada160303003e0200003a03031b79870f786030224aafaf12faf3cb11780b455b25fcdd8f3be3c65bd5d54eb400c030000012ff01000100000b000403000102000f00010116030308850b00088100087e0003c0308203bc308202a4a003020102020101300d06092a864886f70d01 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x8db2a5328cb0a858fbbf5fa81909ec3c (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 2 from 127.0.0.1:36789 to 127.0.0.1:1812 length 143 (2) User-Name = "client.pem" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x020200060d00 (2) State = 0x8db2a5328cb0a858fbbf5fa81909ec3c (2) Message-Authenticator = 0x09374abbc754eba45442ae669e219bc7 (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (2) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (2) auth_log: EXPAND %t (2) auth_log: --> Tue Aug 21 19:09:39 2018 (2) [auth_log] = ok (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) files: users: Matched entry DEFAULT at line 1 (2) [files] = ok (2) [expiration] = noop (2) [logintime] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x8db2a5328cb0a858 (2) eap: Finished EAP session with state 0x8db2a5328cb0a858 (2) eap: Previous EAP request found for state 0x8db2a5328cb0a858, released from the list (2) eap: Peer sent packet with method EAP TLS (13) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: Continuing EAP-TLS (2) eap_tls: Peer ACKed our handshake fragment (2) eap_tls: [eaptls verify] = request (2) eap_tls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1024 (2) eap: EAP session adding &reply:State = 0x8db2a5328fb1a858 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (2) EAP-Message = 0x010304000dc000000ada3fc6f74e554b65096cf1c9576d66e5a1b19b053f667702d6acbfd8730004b8308204b43082039ca003020102020900c600a5ee176d055c300d06092a864886f70d01010b0500308183310b3009060355040613025553310b300906035504080c0257413113301106035504070c (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x8db2a5328fb1a858fbbf5fa81909ec3c (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 127.0.0.1:36789 to 127.0.0.1:1812 length 143 (3) User-Name = "client.pem" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x020300060d00 (3) State = 0x8db2a5328fb1a858fbbf5fa81909ec3c (3) Message-Authenticator = 0x32b0f0985f480c56b06736c57595844b (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (3) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (3) auth_log: EXPAND %t (3) auth_log: --> Tue Aug 21 19:09:39 2018 (3) [auth_log] = ok (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) files: users: Matched entry DEFAULT at line 1 (3) [files] = ok (3) [expiration] = noop (3) [logintime] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x8db2a5328fb1a858 (3) eap: Finished EAP session with state 0x8db2a5328fb1a858 (3) eap: Previous EAP request found for state 0x8db2a5328fb1a858, released from the list (3) eap: Peer sent packet with method EAP TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: Continuing EAP-TLS (3) eap_tls: Peer ACKed our handshake fragment (3) eap_tls: [eaptls verify] = request (3) eap_tls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 760 (3) eap: EAP session adding &reply:State = 0x8db2a5328eb6a858 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (3) EAP-Message = 0x010402f80d8000000adaa158fd0cacf5726c80718dfbaa6c75fa64462d6736903610eb5f1638a7ba7c925b858636296265568e5076bed345f273aaa1d83a2e064f5e6d266da1b233d94533b8803e497f4f37900c0cb829a3f04bc6d4b610dee50a8a47dad71eec9a5ba6538c81bf9bb7fae723a0a61b23 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x8db2a5328eb6a858fbbf5fa81909ec3c (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 4 from 127.0.0.1:36789 to 127.0.0.1:1812 length 1555 (4) User-Name = "client.pem" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x020405800dc000000a1316030308830b00087f00087c0003be308203ba308202a2a003020102020102300d06092a864886f70d01010b0500308183310b3009060355040613025553310b300906035504080c0257413113301106035504070c0a42656c6c696e6768616d31123010060355040a0c094661 (4) State = 0x8db2a5328eb6a858fbbf5fa81909ec3c (4) Message-Authenticator = 0x9073f436730652ec433ae776fd3f8183 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (4) auth_log: --> /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (4) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (4) auth_log: EXPAND %t (4) auth_log: --> Tue Aug 21 19:09:39 2018 (4) [auth_log] = ok (4) eap: Peer sent EAP Response (code 2) ID 4 length 1408 (4) eap: No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) files: users: Matched entry DEFAULT at line 1 (4) [files] = ok (4) [expiration] = noop (4) [logintime] = noop (4) } # authorize = updated (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x8db2a5328eb6a858 (4) eap: Finished EAP session with state 0x8db2a5328eb6a858 (4) eap: Previous EAP request found for state 0x8db2a5328eb6a858, released from the list (4) eap: Peer sent packet with method EAP TLS (13) (4) eap: Calling submodule eap_tls to process data (4) eap_tls: Continuing EAP-TLS (4) eap_tls: Peer indicated complete TLS record size will be 2579 bytes (4) eap_tls: Expecting 2 TLS record fragments (4) eap_tls: Got first TLS record fragment (1398 bytes). Peer indicated more fragments to follow (4) eap_tls: [eaptls verify] = first fragment (4) eap_tls: ACKing Peer's TLS record fragment (4) eap_tls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 6 (4) eap: EAP session adding &reply:State = 0x8db2a53289b7a858 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (4) EAP-Message = 0x010500060d00 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x8db2a53289b7a858fbbf5fa81909ec3c (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 5 from 127.0.0.1:36789 to 127.0.0.1:1812 length 1332 (5) User-Name = "client.pem" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x020504a30d009fd708c7fc4135e2c21b17e472a506e56bec63fd54772c0a3de87ec11d4dac88eeaf28e4c60bb8d1437218453166810fe18d87ca8ea690e9b386b211e159030d338d9af4acfc6b71505764594c6c1b85eced7cf21301ca8c1eca8f2752f3c06098f8efcab9203bb480391976249f12e805 (5) State = 0x8db2a53289b7a858fbbf5fa81909ec3c (5) Message-Authenticator = 0x2b66063c58bd994f19a3dcc4fae8afdc (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log: --> /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (5) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (5) auth_log: EXPAND %t (5) auth_log: --> Tue Aug 21 19:09:39 2018 (5) [auth_log] = ok (5) eap: Peer sent EAP Response (code 2) ID 5 length 1187 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry DEFAULT at line 1 (5) [files] = ok (5) [expiration] = noop (5) [logintime] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x8db2a53289b7a858 (5) eap: Finished EAP session with state 0x8db2a53289b7a858 (5) eap: Previous EAP request found for state 0x8db2a53289b7a858, released from the list (5) eap: Peer sent packet with method EAP TLS (13) (5) eap: Calling submodule eap_tls to process data (5) eap_tls: Continuing EAP-TLS (5) eap_tls: Got final TLS record fragment (1181 bytes) (5) eap_tls: [eaptls verify] = ok (5) eap_tls: Done initial handshake (5) eap_tls: <<< recv TLS 1.2 [length 0883] (5) eap_tls: Creating attributes from certificate OIDs (5) eap_tls: TLS-Cert-Serial := "c600a5ee176d055c" (5) eap_tls: TLS-Cert-Expiration := "181019201014Z" (5) eap_tls: TLS-Cert-Subject := "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest@email.com/CN=Radius Server" (5) eap_tls: TLS-Cert-Issuer := "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest@email.com/CN=Radius Server" (5) eap_tls: TLS-Cert-Common-Name := "Radius Server" (5) eap_tls: Creating attributes from certificate OIDs (5) eap_tls: TLS-Client-Cert-Serial := "02" (5) eap_tls: TLS-Client-Cert-Expiration := "181019201107Z" (5) eap_tls: TLS-Client-Cert-Subject := "/C=US/ST=WA/O=company/CN=kevin.test/emailAddress=kevin.test@email.com" (5) eap_tls: TLS-Client-Cert-Issuer := "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest@email.com/CN=Radius Server" (5) eap_tls: TLS-Client-Cert-Common-Name := "kevin.test" (5) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication" (5) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" (5) eap_tls: Verifying client certificate: /usr/bin/openssl verify -CApath /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename} (5) eap_tls: Executing: /usr/bin/openssl verify -CApath /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename}: (5) eap_tls: EXPAND %{TLS-Client-Cert-Filename} (5) eap_tls: --> /tmp/radiusd/radiusd.client.XX6sVjt9 (5) eap_tls: Program returned code (0) and output '/tmp/radiusd/radiusd.client.XX6sVjt9: OK' (5) eap_tls: Client certificate CN kevin.test passed external validation (5) eap_tls: TLS_accept: unknown state (5) eap_tls: <<< recv TLS 1.2 [length 0046] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: <<< recv TLS 1.2 [length 0108] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: <<< recv TLS 1.2 [length 0001] (5) eap_tls: <<< recv TLS 1.2 [length 0010] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: >>> send TLS 1.2 [length 0001] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: >>> send TLS 1.2 [length 0010] (5) eap_tls: TLS_accept: unknown state (5) eap_tls: TLS_accept: unknown state (5) eap_tls: (other): SSL negotiation finished successfully (5) eap_tls: SSL Connection Established (5) eap_tls: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 6 length 61 (5) eap: EAP session adding &reply:State = 0x8db2a53288b4a858 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 5 from 127.0.0.1:1812 to 127.0.0.1:36789 length 0 (5) EAP-Message = 0x0106003d0d80000000331403030001011603030028381c7e1783d65af09f05df42d3f1b2fed20f91d132889dc662acf7908c7b8dd2a1a9530889f2030a (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x8db2a53288b4a858fbbf5fa81909ec3c (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 6 from 127.0.0.1:36789 to 127.0.0.1:1812 length 143 (6) User-Name = "client.pem" (6) NAS-IP-Address = 127.0.0.1 (6) Calling-Station-Id = "02-00-00-00-00-01" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x020600060d00 (6) State = 0x8db2a53288b4a858fbbf5fa81909ec3c (6) Message-Authenticator = 0x3ffc0b16b3614022609b9f298eafda17 (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) auth_log: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (6) auth_log: --> /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (6) auth_log: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/ 127.0.0.1/auth-detail-20180821 (6) auth_log: EXPAND %t (6) auth_log: --> Tue Aug 21 19:09:39 2018 (6) [auth_log] = ok (6) eap: Peer sent EAP Response (code 2) ID 6 length 6 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry DEFAULT at line 1 (6) [files] = ok (6) [expiration] = noop (6) [logintime] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x8db2a53288b4a858 (6) eap: Finished EAP session with state 0x8db2a53288b4a858 (6) eap: Previous EAP request found for state 0x8db2a53288b4a858, released from the list (6) eap: Peer sent packet with method EAP TLS (13) (6) eap: Calling submodule eap_tls to process data (6) eap_tls: Continuing EAP-TLS (6) eap_tls: Peer ACKed our handshake fragment. handshake is finished (6) eap_tls: [eaptls verify] = success (6) eap_tls: [eaptls process] = success (6) eap: Sending EAP Success (code 3) ID 6 length 4 (6) eap: Freeing handler (6) [eap] = ok (6) } # authenticate = ok (6) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (6) post-auth { (6) update { (6) No attributes updated (6) } # update = noop (6) ldap: EXPAND . (6) ldap: --> . (6) ldap: EXPAND Authenticated at %S (6) ldap: --> Authenticated at 2018-08-21 19:09:39 rlm_ldap (ldap): Reserved connection (0) (6) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (samaccountname=client.pem) (6) ldap: Performing search in "dc=Domain,dc=net" with filter "(samaccountname=client.pem)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: ERROR: Failed performing search: Operations error with LDAP database. Please see the LDAP server configuration / documentation for more information. (6) ldap: ERROR: Server said: 000004DC: LdapErr: DSID-0C0907C2, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v2580. rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://Domain.net:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = fail (6) } # post-auth = fail (6) Using Post-Auth-Type Reject (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> client.pem (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 6 from 127.0.0.1:1812 to 127.0.0.1:36789 length 44 (6) EAP-Message = 0x03060004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +4 (1) Cleaning up request packet ID 1 with timestamp +4 (2) Cleaning up request packet ID 2 with timestamp +4 (3) Cleaning up request packet ID 3 with timestamp +4 (4) Cleaning up request packet ID 4 with timestamp +4 (5) Cleaning up request packet ID 5 with timestamp +4 (6) Cleaning up request packet ID 6 with timestamp +4 Ready to process requests
From: Freeradius-Users <freeradius-users-bounces+kevin.virk= faithlife.com@lists.freeradius.org> on behalf of freeradius-users-request@lists.freeradius.org < freeradius-users-request@lists.freeradius.org> Sent: Tuesday, August 21, 2018 3:00 AM To: freeradius-users@lists.freeradius.org Subject: Freeradius-Users Digest, Vol 160, Issue 41
Send Freeradius-Users mailing list submissions to freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Re: Re: Apache with mod_auth_radius starts X requests (Fajar A. Nugraha)
----------------------------------------------------------------------
Message: 1 Date: Tue, 21 Aug 2018 16:25:50 +0700 From: "Fajar A. Nugraha" <list@fajar.net> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: Re: Apache with mod_auth_radius starts X requests Message-ID: <CAG1y0sda1T+K+gGYotwihfd+Ly2RLkPrZd_fCt2Ciiz31q-jQQ@mail.gmail.com> Content-Type: text/plain; charset="UTF-8"
On Tue, Aug 21, 2018 at 4:22 PM, Carsten Schulze < carsten.schulze@leuphana.de> wrote:
Hi,
to finalize.
I installed a PHP Directory Listner to that folder, with that, only one request was generated.
If its not possible, you can reduce the index.* (checks) in apache, which will reduce the total amount of Radius-Reuqests.
/etc/apache2/mods-enabled/dir.conf <IfModule mod_dir.c> #DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm DirectoryIndex index.php </IfModule>
Isn't that basically what https://github.com/FreeRADIUS/mod_auth_radius#4-some-warnings says?
-- Fajar
------------------------------
Subject: Digest Footer
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
------------------------------
End of Freeradius-Users Digest, Vol 160, Issue 41 *************************************************
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Best regards, Alex Morozenko
On Aug 21, 2018, at 3:29 PM, Kevin Virk <Kevin.Virk@faithlife.com> wrote:
Hello all I have followed previous advice given to me and upgraded my install to FreeRADIUS 3.0.17 . I am trying to achieve a setup where computers are let onto company internet via eap-tls and then are separated into VLANS with ldap after this. Currently I believe I have eap-tls working as my eapol test has been successful. However after adding in the ldap module I am getting a bind error which I know is an LDAP error and not a freeradius one. I was hoping someone here could take a look at my debug info and see if I have overlooked anything.
The debug message should be clear:
... (6) ldap: Performing search in "dc=Domain,dc=net" with filter "(samaccountname=client.pem)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: ERROR: Failed performing search: Operations error with LDAP database. Please see the LDAP server configuration / documentation for more information. (6) ldap: ERROR: Server said: 000004DC: LdapErr: DSID-0C0907C2, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v2580.
The LDAP database requires FreeRADIUS to do a bind before a search. That message should be clear. Fix the LDAP database so that it lets FreeRADIUS do searches. The LDAP module is configured as: ldap { server = "Domain.net" identity = "cn=ldap.query,ou=service.accounts,ou=Users,ou=operations,ou=departments,dc=Domain,dc=net" password = <<< secret >>> That user identity isn't allowed to do LDAP searches. So... fix the LDAP database so that user identity can do LDAP searches. Alan DeKok.
participants (3)
-
Alan DeKok -
Kevin Virk -
Алексей Морозенко