hi, i have a problem with the users file rules. I can use "NAS-IP-Address", "User-Name", "NAS-Port-Type" field in order to filter the packet and make different type of authentication inside users file. for example DEFAULT NAS-Port-Type == Wireless-802.11 , Autz-Type := wireless , Auth-Type := wireless this rule matches the packet and start wireless auth-type etc etc... but if i use DEFAULT Called-Station-Id == "0A-11-22-33-44-55:ssid" , Autz-Type := wireless , Auth-Type := wireless with or without double quotes this rule doesn't match the packet. I'm using EAP-TTLS+pap , maybe there's a problem with the session inside the tunnel and the one outside the tunnel? the simple question is, why if i see that field i 'm not able to use it? where's my misconfiguration? of course radiusd -X gives rad_recv: Access-Request packet from host 192.168.123.251.:1365, id=69, length=744 User-Name = "testuser" NAS-IP-Address = 127.0.0.1 NAS-Port = 1 Called-Station-Id = "0A-11-22-33-44-55:ssid" Calling-Station-Id = "00-00-11-11-11-55" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" (i didn't send the whole radiusd -X output because i thought it was useless) arjuna -- View this message in context: http://www.nabble.com/users-file-matching-rules-tp15156740p15156740.html Sent from the FreeRadius - User mailing list archive at Nabble.com.