Hi,

Now my problem is, when I try to send an access-request (using the Radius Test Utility) from another machine (running Windows XP), which is in the same network, the server does not says that it receives an access-request.

Does anybody know, where the problem is?

read the clients.conf file and see that you need to allow other machines access to query your radius alan

Madhuraka Godahewa wrote:

Hi All,

I installed freeRADIUS 1.0.5 recently, and configured the server as described in the documentation files. My operating system is SUSE Linux 9.2. When I run the 'radiusd -X' from the shell, the last four lines of the output are as follows.

< Listening on authentication 10.128.253.110:1812 Listening on accounting 10.128.253.110:1813 Listening on proxy 10.128.253.110:1814 Ready to process requests.

10.128.253.110 is the IP Address given to the Radius Server. Then, I created a test account named 'root' with the password 'root'. Then, I ran the radtest (from the RADIUS Server itself) and got the following output.

< Sending Access-Request of id 195 to 10.128.253.110:1812 User-Name = "root" User-Password = "root" NAS-IP-Address = rajith-office NAS-Port = 1812 rad_recv: Access-Accept packet from host 10.128.253.110:1812, id=195, length=20

'rajith-office' is the name given to the RADIUS Server. In the debug shell, I obtained the following output.

<

rad_recv: Access-Request packet from host 10.128.253.110:1025, id=195, length=56 User-Name = "root" User-Password = "root" NAS-IP-Address = 255.255.255.255 NAS-Port = 1812 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "root", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched root at 153 users: Matched DEFAULT at 157 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied User-Password matches local User-Password Sending Access-Accept of id 195 to 10.128.253.110:1025 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 195 with timestamp 438c1bca Nothing to do. Sleeping until we see a request.

Now my problem is, when I try to send an access-request (using the Radius Test Utility) from another machine (running Windows XP), which is in the same network, the server does not says that it receives an access-request.

Does anybody know, where the problem is?

Thanking You. -------------------------------------------------------------------------------- Madhuraka Godahewa Telecommunications Engineer Research and Development Unit Electroteks Global Networks (Pvt.) Ltd.

Mobile: + 94-777-647055 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

You should be seeing something if the requests is even making it to the radiusd process. Use tcpdump on the server to ensure you are receiving the request. 'tcpdump port 1812' should do it. If you see nothing, you have a firewall/network connectivity issue on the server or client. Chris Carver