Getting NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) when using ntlm_auth
I follow http://deployingradius.com/documents/configuration/active_directory.html to configure freeradius with Active Directory. Samba and Kerberos works. When running "ntlm_auth --request-nt-key" command and it works but through Freeradius, it gives NT_STATUS_WRONG_PASSWORD. Following is the output of radiusd -X. Can you please help me find out what can be wrong? Output of radiusd -X: FreeRADIUS Version 2.1.7, for host i386-redhat-linux-gnu, built on Dec 30 2009 at 13:47:58 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/ldap.rpmsave including configuration file /etc/raddb/modules/mschapBck including configuration file /etc/raddb/modules/ldapBck including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 10.1.11.33 { require_message_authenticator = no secret = "testpwd" shortname = "10.1.11.33" nastype = "none" } client 10.1.1.1 { require_message_authenticator = no secret = "test123" shortname = "localSystem" nastype = "test" } client 10.1.0.33 { require_message_authenticator = no secret = "testpwd" shortname = "10.1.0.33" nastype = "none" } client localhost { require_message_authenticator = no secret = "test123" nastype = "test" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = yes require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:- MYDOMAIN.COM} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN.COM--username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.1.0.33 port 1645, id=183, length=141 User-Name = "testuser" Framed-MTU = 1400 Called-Station-Id = "00-19-56-B0-90-18" Calling-Station-Id = "00-1B-77-89-0E-6D" Service-Type = Login-User Message-Authenticator = 0xacce4dee9361babf8639ffeecac12bd2 EAP-Message = 0x0202000d01666c616d696e676f NAS-Port-Type = Wireless-802.11 NAS-Port = 17098251 NAS-Port-Id = "17098251" NAS-IP-Address = 10.1.0.33 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 4 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = ntlm_auth +- entering group authenticate {...} [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=testuser [ntlm_auth] expand: --password=%{User-Password} -> --password= Exec-Program output: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Exec-Program-Wait: plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Exec-Program: returned: 1 ++[ntlm_auth] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> testuser attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 183 to 10.1.0.33 port 1645 Waking up in 4.9 seconds. Cleaning up request 0 ID 183 with timestamp +16 Ready to process requests. Thanks.
Angelica Delgado wrote:
I follow http://deployingradius.com/documents/configuration/active_directory.html to configure freeradius with Active Directory. Samba and Kerberos works. When running "ntlm_auth --request-nt-key" command and it works but through Freeradius, it gives NT_STATUS_WRONG_PASSWORD. Following is the output of radiusd -X. Can you please help me find out what can be wrong?
You didn't follow the instructions on the web page. If you had followed them, it would work. I *could* explain what is going wrong. But why? I already did in detail on the web page I wrote years ago. Read it. Follow the instructions there. It *will* work. Alan DeKok.
Hi,
[ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=testuser
[ntlm_auth] expand: --password=%{User-Password} -> --password= ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
look. blank! use the correct attribute in that --password argument alan
Angelica Delgado-2 wrote
Freeradius, it gives NT_STATUS_WRONG_PASSWORD.
I am having a similar issue to this. I have LDAP authentication working. However, my wireless controller, Nortel/Avaya 2382, will not work. Radius ping from the localhost and a server works fine. Radius log when I ran a ping from a server configured as a client in client.conf: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=user [ntlm_auth] expand: --password=%{User-Password} -> --password=password Exec-Program output: NT_STATUS_OK: Success (0x0) Exec-Program-Wait: plaintext: NT_STATUS_OK: Success (0x0) Radius log when I ran a ping from the wireless controller, which is also a client in the clients.conf: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=user [ntlm_auth] expand: --password=%{User-Password} -> --password= Exec-Program output: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Exec-Program-Wait: plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Eventually, it locks the acocunt in active directory: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=user [ntlm_auth] expand: --password=%{User-Password} -> --password= Exec-Program output: NT_STATUS_ACCOUNT_LOCKED_OUT: Account locked out (0xc0000234) Exec-Program-Wait: plaintext: NT_STATUS_ACCOUNT_LOCKED_OUT: Account locked out (0xc0000234) I am not sure why the wireless controller will not send the password, or why FreeRADIUS is not seeing the password. Any help is very appreciated. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Getting-NT-STATUS-WRONG-PASSWORD-Wro... Sent from the FreeRadius - User mailing list archive at Nabble.com.
Hi,
I am having a similar issue to this. I have LDAP authentication working. However, my wireless controller, Nortel/Avaya 2382, will not work.
....and what type of request is coming through? If its not a PAP type of request - as per from your server test, then you wont have %{User-Password} - check the mschap module to see the challenge response example.... and 'radiusd -X' for help does help... this little 4 line of output really says nothing.... alan
Alan Buxey wrote
....and what type of request is coming through? - check the mschap module to see the challenge response example.... and 'radiusd -X' for help does help...
Alan, thank you, my wireless controller was set to send MSCHAP-v2. Changing the controller to PAP allows it to complete a successful radius ping. However, I have moved onto another problem, an 802.1x client will not authenticate sending EAP-PEAP/EAP-MSCHAP-v2. I received the following log output from radius: [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/raddb/sites-enabled/default [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: root [mschap] Told to do MS-CHAPv2 for root with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. My mschap module is configured as follows: mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{% {Stripped-User-Name}:-%{mschap:User-Name:-None}} --challenge=% {mschap:Challenge:-00} –nt-response=%{mschap:NT-Response:-00}" } I have also tried: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-domain.net} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" Please let me know if you see my errors, or have thoughts. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Getting-NT-STATUS-WRONG-PASSWORD-Wro... Sent from the FreeRadius - User mailing list archive at Nabble.com.
lint wrote
Alan, thank you, my wireless controller was set to send MSCHAP-v2. Changing the controller to PAP allows it to complete a successful radius ping. However, I have moved onto another problem, an 802.1x client will not authenticate sending EAP-PEAP/EAP-MSCHAP-v2.
So, if I create a user in the users file, I can connect with that account over 802.1x. DEFAULT EAP-Message !* "", Auth-Type := Accept test Cleartext-Password := "password", MS-CHAP-Use-NTLM-Auth := 0 Doesn't the FreeRADIUS documentation mention that the users file is not required for NTLM to work with active directory? This doesn't make sense to me, why would I need to create users when they already live in active directory? I know that this means I am doing something wrong. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Getting-NT-STATUS-WRONG-PASSWORD-Wro... Sent from the FreeRadius - User mailing list archive at Nabble.com.
participants (4)
-
Alan Buxey -
Alan DeKok -
Angelica Delgado -
lint