Hello, I use "ancient" Free Radius 1.1.7 packages (from Ubuntu 8.04/Hardy) on Ubuntu Server 9.10. I use "ancient" Free Radius, because the requirement from Radius Manager we buy from http://www.radius-manager.com/. But after finish setting up the configuration for Free Radius, I've got some problem. Some problem I could fixed after asking some question from this mailing list and searching from google. But I've got another problem, my testing is rejected. What should I do ? Best Regards, Teguh Kurniawan # radtest user 1111 localhost 1812 testing123 Sending Access-Request of id 172 to 127.0.0.1 port 1812 User-Name = "user" User-Password = "1111" NAS-IP-Address = 255.255.255.255 NAS-Port = 1812 rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=172, length=20 /etc/hosts 127.0.0.1 localhost 192.168.0.3 radiusmanager.testme.net radiusmanager # freeradius -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1812 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/freeradius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/freeradius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/freeradius/users" files: acctusersfile = "/etc/freeradius/acct_users" files: preproxy_usersfile = "/etc/freeradius/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded SQL sql: driver = "rlm_sql_mysql" sql: server = "localhost" sql: port = "" sql: login = "radius" sql: password = "radius123" sql: radius_db = "radius" sql: nas_table = "nas" sql: sqltrace = no sql: sqltracefile = "/var/log/freeradius/sqltrace.sql" sql: readclients = no sql: deletestalesessions = yes sql: num_sql_socks = 5 sql: sql_user_name = "%{User-Name}" sql: default_user_profile = "" sql: query_on_not_found = no sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = " UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Gigawords:-0}' << 32 | '%{Acct-Input-Octets:-0}', AcctOutputOctets = '%{Acct-Output-Gigawords:-0}' << 32 | '%{Acct-Output-Octets:-0}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_update_query_alt = " INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Gigawords:-0}' << 32 | '%{Acct-Input-Octets:-0}', '%{Acct-Output-Gigawords:-0}' << 32 | '%{Acct-Output-Octets:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" sql: accounting_start_query = " INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = " UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Gigawords:-0}' << 32 | '%{Acct-Input-Octets:-0}', AcctOutputOctets = '%{Acct-Output-Gigawords:-0}' << 32 | '%{Acct-Output-Octets:-0}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = " INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Gigawords:-0}' << 32 | '%{Acct-Input-Octets:-0}', '%{Acct-Output-Gigawords:-0}' << 32 | '%{Acct-Output-Octets:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time:-0}')" sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'" sql: connect_failure_retry_delay = 60 sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: postauth_query = "INSERT into radpostauth (user, pass, reply, date) values ('%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())" sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:55166, id=172, length=56 User-Name = "user" User-Password = "1111" NAS-IP-Address = 255.255.255.255 NAS-Port = 1812 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 217 radius_xlat: '/usr/local/bin/rmauth "255.255.255.255" "user""" "1812"' modcall[authorize]: module "files" returns ok for request 0 radius_xlat: 'user' rlm_sql (sql): sql_set_user escaped user --> 'user' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'user' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 4 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'user' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'user' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'user' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 4 modcall[authorize]: module "sql" returns ok for request 0 rlm_pap: Found existing Auth-Type, not changing it. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied User-Password matches local User-Password Processing the session section of radiusd.conf modcall: entering group session for request 0 radius_xlat: 'user' rlm_sql (sql): sql_set_user escaped user --> 'user' radius_xlat: 'SELECT COUNT(*) FROM radacct WHERE UserName='user' AND AcctStopTime = 0' rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 modcall[session]: module "sql" returns ok for request 0 modcall: leaving group session (returns ok) for request 0 cfg.c, line 175: no permission for configfile Exec-Program output: Exec-Program: returned: 1 Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 172 to 127.0.0.1 port 55166 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 172 with timestamp 4b7537cd Nothing to do. Sleeping until we see a request.