successful authentication (peap and TTLS), but internet access that for 5 seconds
Hello everyone, I have a problem with my freeradius server (or maybe switch), the problem is that : I connected a customer on a switch port (Cisco 2940) configured 802.1X Authentication is successful, but I have access to the internet that for 5 seconds and after nothing. I wonder if there is no configuration to avoid this kind of problem. Best regards S.Nick
Hi,
I connected a customer on a switch port (Cisco 2940) configured 802.1X Authentication is successful, but I have access to the internet that for 5 seconds and after nothing.
if FreeRADIUS sends back the Access-Accept and is sending back the attributes required by the NAS then your problems are elsewhere alan
On server freeradius , i have this message Cleaning up request 54 ID 106 with timestamp +1159 Cleaning up request 55 ID 107 with timestamp +1159 Cleaning up request 56 ID 108 with timestamp +1159 Cleaning up request 57 ID 109 with timestamp +1159 Cleaning up request 58 ID 110 with timestamp +1159 Cleaning up request 59 ID 111 with timestamp +1159 Best regards S.Nick Le Vendredi 30 janvier 2015 14h07, "A.L.M.Buxey@lboro.ac.uk" <A.L.M.Buxey@lboro.ac.uk> a écrit : Hi,
I connected a customer on a switch port (Cisco 2940) configured 802.1X Authentication is successful, but I have access to the internet that for 5 seconds and after nothing.
if FreeRADIUS sends back the Access-Accept and is sending back the attributes required by the NAS then your problems are elsewhere alan
On Fri, Jan 30, 2015 at 11:26:50AM +0000, Sautron Nick wrote:
On server freeradius , i have this message ... Cleaning up request 58 ID 110 with timestamp +1159 Cleaning up request 59 ID 111 with timestamp +1159
These lines aren't useful - you need to look at all the lines of debug output before this. If you have a line that says "Sending Access-Accept", then Alan is right - it's likely nothing to do with the RADIUS server. Matthew -- Matthew Newton, Ph.D. <mcn4@le.ac.uk> Systems Specialist, Infrastructure Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom For IT help contact helpdesk extn. 2253, <ithelp@le.ac.uk>
Am Freitag, 30. Januar 2015, 11:26:50 schrieb Sautron Nick:
On server freeradius , i have this message
Cleaning up request 54 ID 106 with timestamp +1159 Cleaning up request 55 ID 107 with timestamp +1159 Cleaning up request 56 ID 108 with timestamp +1159 Cleaning up request 57 ID 109 with timestamp +1159 Cleaning up request 58 ID 110 with timestamp +1159 Cleaning up request 59 ID 111 with timestamp +1159 Best regards
S.Nick
These line state the the server cleans up the requests but contain no valuable information. Cleanup happens normally 5 seconds after the request finished. What relevent log information does appear 5 seconds before (!) the cleanup. Something like "Sending Access-Accept". If the Access-Accept is the last action for that customer, your NAS has teh problem. If your RADIUS server sends other information (i.e. like CoA) after the Access-Accept, then you would have to debug your config. Mit freundlichen Grüßen, Michael Schwartzkopff -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64, +49 (162) 165 0044 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein
participants (4)
-
A.L.M.Buxey＠lboro.ac.uk -
Matthew Newton -
Michael Schwartzkopff -
Sautron Nick