Hi folks, I have a PPPoE server which authenticates the user on freeradius... Right now, the PPPoE server is in charge of assigning the IPs to the users but I want to do that via radius because I'm adding another PPPoE server on the network and OSPF routing... Problem is, I had a look on radiusd.conf and what I could understand is that I can only have pools on a same network (like 192.168.0.0/23, for instance)... But I need 1 big pool with IPs in different networks because my users receive valid public IP addresses... So, I need all users on the same pool and the pool has to have a bunch of differente IP ranges, not in order, like 200.200.200.0/24, 201.10.20.0/24 and so on... Is that even possible? -- Marcelus Trojahn
How about multiple pools - one for each subnet. If I recall well, you add all the ippools to post-auth section of radiusd.conf and use Pool-Name := DEFAULT. That worked some years ago. Haven't tried it lately. Ivan Kalik Kalik Informatika ISP Dana 6/12/2007, "Marcelus Trojahn" <trojahn@i-next.psi.br> piše:
Hi folks,
I have a PPPoE server which authenticates the user on freeradius... Right now, the PPPoE server is in charge of assigning the IPs to the users but I want to do that via radius because I'm adding another PPPoE server on the network and OSPF routing...
Problem is, I had a look on radiusd.conf and what I could understand is that I can only have pools on a same network (like 192.168.0.0/23, for instance)... But I need 1 big pool with IPs in different networks because my users receive valid public IP addresses...
So, I need all users on the same pool and the pool has to have a bunch of differente IP ranges, not in order, like 200.200.200.0/24, 201.10.20.0/24 and so on...
Is that even possible?
-- Marcelus Trojahn
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Sounds like a plan, I'll give it a try. Thanks! -- Marcelus Trojahn tnt@kalik.co.yu wrote:
How about multiple pools - one for each subnet. If I recall well, you add all the ippools to post-auth section of radiusd.conf and use Pool-Name := DEFAULT. That worked some years ago. Haven't tried it lately.
Ivan Kalik Kalik Informatika ISP
Dana 6/12/2007, "Marcelus Trojahn" <trojahn@i-next.psi.br> piše:
Hi folks,
I have a PPPoE server which authenticates the user on freeradius... Right now, the PPPoE server is in charge of assigning the IPs to the users but I want to do that via radius because I'm adding another PPPoE server on the network and OSPF routing...
Problem is, I had a look on radiusd.conf and what I could understand is that I can only have pools on a same network (like 192.168.0.0/23, for instance)... But I need 1 big pool with IPs in different networks because my users receive valid public IP addresses...
So, I need all users on the same pool and the pool has to have a bunch of differente IP ranges, not in order, like 200.200.200.0/24, 201.10.20.0/24 and so on...
Is that even possible?
-- Marcelus Trojahn
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (2)
-
Marcelus Trojahn -
tnt＠kalik.co.yu