Hi Alan, Please find the debug log attached below. I am pretty new to 802.1x, so might be missing something. Please correct me if I am wrong EAP PEAP with MSCHAPv2 ...does MSCHAPv2 authentication at the phase2 under the hood of the TLS tunnel, dont we need the configs for MSCHAPv2 like username and password. Regards, Dev start logs -------------- FreeRADIUS Version 2.1.8, for host i686-pc-linux-gnu, built on Feb  2 2010 at 16:20:53 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/control-socket including configuration file /usr/local/etc/raddb/sites-enabled/default main {  allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main {  prefix = "/usr/local"  localstatedir = "/usr/local/var"  logdir = "/usr/local/var/log/radius"  libdir = "/usr/local/lib"  radacctdir = "/usr/local/var/log/radius/radacct"  hostname_lookups = no  max_request_time = 30  cleanup_delay = 5  max_requests = 1024  pidfile = "/usr/local/var/run/radiusd/radiusd.pid"  checkrad = "/usr/local/sbin/checkrad"  debug_level = 0  proxy_requests = yes  log {  stripped_names = no  auth = no  auth_badpass = no  auth_goodpass = no  }  security {  max_attributes = 200  reject_delay = 1  status_server = yes  } } radiusd: #### Loading Realms and Home Servers ####  proxy server {  retry_delay = 5  retry_count = 3  default_fallback = no  dead_time = 120  wake_all_if_all_dead = no  }  home_server localhost {  ipaddr = 127.0.0.1  port = 1812  type = "auth"  secret = "testing123"  response_window = 20  max_outstanding = 65536  require_message_authenticator = no  zombie_period = 40  status_check = "status-server"  ping_interval = 30  check_interval = 30  num_answers_to_alive = 3  num_pings_to_alive = 3  revive_interval = 120  status_check_timeout = 4  irt = 2  mrt = 16  mrc = 5  mrd = 30  }  home_server_pool my_auth_failover {  type = fail-over  home_server = localhost  }  realm example.com {  auth_pool = my_auth_failover  }  realm LOCAL {  } radiusd: #### Loading Clients ####  client localhost1 {  ipaddr = 127.0.0.1  require_message_authenticator = no  secret = "testing123"  nastype = "other"  }  client 10.191.8.187 {  require_message_authenticator = no  secret = "freeradius"  } radiusd: #### Instantiating modules ####  instantiate {  Module: Linked to module rlm_exec  Module: Instantiating exec   exec {  wait = no  input_pairs = "request"  shell_escape = yes   }  Module: Linked to module rlm_expr  Module: Instantiating expr  Module: Linked to module rlm_expiration  Module: Instantiating expiration   expiration {  reply-message = "Password Has Expired  "   }  Module: Linked to module rlm_logintime  Module: Instantiating logintime   logintime {  reply-message = "You are calling outside your allowed timespan  "  minimum-timeout = 60   }  } radiusd: #### Loading Virtual Servers #### server inner-tunnel {  modules {  Module: Checking authenticate {...} for more modules to load  Module: Linked to module rlm_pap  Module: Instantiating pap   pap {  encryption_scheme = "auto"  auto_header = no   }  Module: Linked to module rlm_chap  Module: Instantiating chap  Module: Linked to module rlm_mschap  Module: Instantiating mschap   mschap {  use_mppe = yes  require_encryption = no  require_strong = no  with_ntdomain_hack = no   }  Module: Linked to module rlm_unix  Module: Instantiating unix   unix {  radwtmp = "/usr/local/var/log/radius/radwtmp"   }  Module: Linked to module rlm_eap  Module: Instantiating eap   eap {  default_eap_type = "peap"  timer_expire = 60  ignore_unknown_eap_types = no  cisco_accounting_username_bug = no  max_sessions = 4096   }  Module: Linked to sub-module rlm_eap_md5  Module: Instantiating eap-md5  Module: Linked to sub-module rlm_eap_leap  Module: Instantiating eap-leap  Module: Linked to sub-module rlm_eap_gtc  Module: Instantiating eap-gtc    gtc {  challenge = "Password: "  auth_type = "PAP"    }  Module: Linked to sub-module rlm_eap_tls  Module: Instantiating eap-tls    tls {  rsa_key_exchange = no  dh_key_exchange = yes  rsa_key_length = 512  dh_key_length = 512  verify_depth = 0  pem_file_type = yes  private_key_file = "/usr/local/etc/raddb/certs/radsvr.key"  certificate_file = "/usr/local/etc/raddb/certs/radsvrcert.pem"  CA_file = "/usr/local/etc/raddb/certs/cacert.pem"  private_key_password = "freeradius"  dh_file = "/usr/local/etc/raddb/certs/dh"  random_file = "/usr/local/etc/raddb/certs/random"  fragment_size = 1024  include_length = yes  check_crl = no  cipher_list = "DEFAULT"  make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"     cache {  enable = no  lifetime = 24  max_entries = 255     }    }  Module: Linked to sub-module rlm_eap_ttls  Module: Instantiating eap-ttls    ttls {  default_eap_type = "md5"  copy_request_to_tunnel = yes  use_tunneled_reply = yes  virtual_server = "inner-tunnel"  include_length = yes    }  Module: Linked to sub-module rlm_eap_peap  Module: Instantiating eap-peap    peap {  default_eap_type = "mschapv2"  copy_request_to_tunnel = yes  use_tunneled_reply = yes  proxy_tunneled_request_as_eap = yes  virtual_server = "inner-tunnel"    }  Module: Linked to sub-module rlm_eap_mschapv2  Module: Instantiating eap-mschapv2    mschapv2 {  with_ntdomain_hack = no    }  Module: Checking authorize {...} for more modules to load  Module: Linked to module rlm_realm  Module: Instantiating suffix   realm suffix {  format = "suffix"  delimiter = "@"  ignore_default = no  ignore_null = no   }  Module: Linked to module rlm_files  Module: Instantiating files   files {  usersfile = "/usr/local/etc/raddb/users"  acctusersfile = "/usr/local/etc/raddb/acct_users"  preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"  compat = "no"   }  Module: Checking session {...} for more modules to load  Module: Linked to module rlm_radutmp  Module: Instantiating radutmp   radutmp {  filename = "/usr/local/var/log/radius/radutmp"  username = "%{User-Name}"  case_sensitive = yes  check_with_nas = yes  perm = 384  callerid = yes   }  Module: Checking post-proxy {...} for more modules to load  Module: Checking post-auth {...} for more modules to load  Module: Linked to module rlm_attr_filter  Module: Instantiating attr_filter.access_reject   attr_filter attr_filter.access_reject {  attrsfile = "/usr/local/etc/raddb/attrs.access_reject"  key = "%{User-Name}"   }  } # modules } # server server {  modules {  Module: Checking authenticate {...} for more modules to load  Module: Checking authorize {...} for more modules to load  Module: Linked to module rlm_preprocess  Module: Instantiating preprocess   preprocess {  huntgroups = "/usr/local/etc/raddb/huntgroups"  hints = "/usr/local/etc/raddb/hints"  with_ascend_hack = no  ascend_channels_per_line = 23  with_ntdomain_hack = no  with_specialix_jetstream_hack = no  with_cisco_vsa_hack = no  with_alvarion_vsa_hack = no   }  Module: Checking preacct {...} for more modules to load  Module: Linked to module rlm_acct_unique  Module: Instantiating acct_unique   acct_unique {  key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"   }  Module: Checking accounting {...} for more modules to load  Module: Linked to module rlm_detail  Module: Instantiating detail   detail {  detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"  header = "%t"  detailperm = 384  dirperm = 493  locking = no  log_packet_header = no   }  Module: Instantiating attr_filter.accounting_response   attr_filter attr_filter.accounting_response {  attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"  key = "%{User-Name}"   }  Module: Checking session {...} for more modules to load  Module: Checking post-proxy {...} for more modules to load  Module: Checking post-auth {...} for more modules to load  } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen {  type = "auth"  ipaddr = *  port = 0 } listen {  type = "acct"  ipaddr = *  port = 0 } listen {  type = "control"  listen {  socket = "/usr/local/var/run/radiusd/radiusd.sock"  } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.191.8.187 port 1025, id=15, length=125  EAP-Message = 0x021100090164657661  NAS-Port-Type = Ethernet  User-Name = "deva"  NAS-IP-Address = 10.191.8.187  NAS-Port = 2  Framed-MTU = 1000  NAS-Port-Id = "Port 2"  Calling-Station-Id = "00-c0-ee-66-09-b6"  Called-Station-Id = "00-22-6b-33-ee-0d"  Message-Authenticator = 0xa4b9e48629f2ee7e4ad6409f322bb932 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "deva", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 17 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns updated WARNING: Found User-Password == "...". WARNING: Are you sure you don't mean Cleartext-Password? WARNING: See "man rlm_pap" for more information. [files] users: Matched entry deva at line 61 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 15 to 10.191.8.187 port 1025  EAP-Message = 0x011200061920  Message-Authenticator = 0x00000000000000000000000000000000  State = 0xb27c20a6b26e394a0ab57f4dc80f905e Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.191.8.187 port 1025, id=16, length=208  EAP-Message = 0x0212004a198000000040160301003b0100003703014b6c69da6376f61ced77e9a203c21d1bad812388a9b7b4dbbce4e319c8c51b680000100035000a002f006200610009000800060100  State = 0xb27c20a6b26e394a0ab57f4dc80f905e  NAS-Port-Type = Ethernet  User-Name = "deva"  NAS-IP-Address = 10.191.8.187  NAS-Port = 2  Framed-MTU = 1000  NAS-Port-Id = "Port 2"  Calling-Station-Id = "00-c0-ee-66-09-b6"  Called-Station-Id = "00-22-6b-33-ee-0d"  Message-Authenticator = 0xc75bfb0056761c651c370ce733100af1 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "deva", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 18 length 74 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS   TLS Length 64 [peap] Length Included [peap] eaptls_verify returned 11 [peap]     (other): before/accept initialization [peap]     TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 003b], ClientHello  [peap]     TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello  [peap]     TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 053b], Certificate  [peap]     TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  [peap]     TLS_accept: SSLv3 write server done A [peap]     TLS_accept: SSLv3 flush data [peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode  [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 16 to 10.191.8.187 port 1025  EAP-Message = 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  EAP-Message = 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  EAP-Message = 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  EAP-Message = 0x310d300b060355040b13046669726d3111300f060355040313086665646f72613131311f301d06092a864886f70d01090116106665646f72616c6c406b796f2e636f6d301e170d3130303230333032313235395a170d3133303230323032313235395a306b310b3009060355040613025553310b3009060355040813024341310c300a060355040a13036b796f310d300b060355040b13046669726d3111300f060355040313086665646f72613131311f301d06092a864886f70d01090116106665646f72616c6c406b796f2e636f6d30819f300d06092a864886f70d010101050003818d0030818902818100  Message-Authenticator = 0x00000000000000000000000000000000  State = 0xb27c20a6b36f394a0ab57f4dc80f905e Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.191.8.187 port 1025, id=17, length=140  EAP-Message = 0x021300061900  State = 0xb27c20a6b36f394a0ab57f4dc80f905e  NAS-Port-Type = Ethernet  User-Name = "deva"  NAS-IP-Address = 10.191.8.187  NAS-Port = 2  Framed-MTU = 1000  NAS-Port-Id = "Port 2"  Calling-Station-Id = "00-c0-ee-66-09-b6"  Called-Station-Id = "00-22-6b-33-ee-0d"  Message-Authenticator = 0x703e7d0dff6e45d1d9a1f81513ea38c6 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "deva", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 19 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 17 to 10.191.8.187 port 1025  EAP-Message = 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  EAP-Message = 0xd9924c6d1e34e17699bff7300d06092a864886f70d010105050003818100823802406247501f766162dc90260500d56ca022471e50902ed8316f26fdcffe7f9a9d64937ebdfaed8ebd221685369c75556317916ea0301f5b1ccd550dbfc457dfcc0ccbebd826e56d4ce564b53b6a8ae91ea7a3357a3a43a5e355319ecb8ca631f9db961a5089725768e3e065927f79cea61b262d4ff6cfb7e0f39e6558b016030100040e000000  Message-Authenticator = 0x00000000000000000000000000000000  State = 0xb27c20a6b068394a0ab57f4dc80f905e Finished request 2. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.191.8.187 port 1025, id=18, length=342  EAP-Message = 0x021400d01980000000c6160301008610000082008049d315aeb5db8e95469539cb35c50329caa30a71f2af5f77edf85daa9309099eb41d0b2423672538fe84b2164a800cbd9592b32388e889d685235703bd679affd7b489ab0ed7f4a3338ce36c4f7dd4f62da3a35ede3286abc345d7d29ea5b4cc7cbd9648c43e9b574d6f8c1fe9f231e5040ae057245f2d95c76f55d157dc66a41403010001011603010030972820e36a4d7b25386123ac9715c29ec84b2232323f5d5a653a3769f9d515a3082fa5054f85e8183211a156356ab92c  State = 0xb27c20a6b068394a0ab57f4dc80f905e  NAS-Port-Type = Ethernet  User-Name = "deva"  NAS-IP-Address = 10.191.8.187  NAS-Port = 2  Framed-MTU = 1000  NAS-Port-Id = "Port 2"  Calling-Station-Id = "00-c0-ee-66-09-b6"  Called-Station-Id = "00-22-6b-33-ee-0d"  Message-Authenticator = 0x141a3c15642be74a6c95788cf8144e29 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "deva", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 20 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS   TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  [peap]     TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]  [peap] <<< TLS 1.0 Handshake [length 0010], Finished  [peap]     TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]  [peap]     TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished  [peap]     TLS_accept: SSLv3 write finished A [peap]     TLS_accept: SSLv3 flush data [peap]     (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 18 to 10.191.8.187 port 1025  EAP-Message = 0x0115004119001403010001011603010030f3f11162018cf0697f8df90b46cb2977488676fd8c01ec17f886436a783cc80675f16b74ac916bba96c1b667b4e69948  Message-Authenticator = 0x00000000000000000000000000000000  State = 0xb27c20a6b169394a0ab57f4dc80f905e Finished request 3. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.191.8.187 port 1025, id=19, length=140  EAP-Message = 0x021500061900  State = 0xb27c20a6b169394a0ab57f4dc80f905e  NAS-Port-Type = Ethernet  User-Name = "deva"  NAS-IP-Address = 10.191.8.187  NAS-Port = 2  Framed-MTU = 1000  NAS-Port-Id = "Port 2"  Calling-Station-Id = "00-c0-ee-66-09-b6"  Called-Station-Id = "00-22-6b-33-ee-0d"  Message-Authenticator = 0xe1196e0e907453fe8529ba8754f5ba7c +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "deva", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 21 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 19 to 10.191.8.187 port 1025  EAP-Message = 0x0116002b19001703010020ce85837d277054c3469c6ab1594af7a219ac2c0ea337c4a1876620e1bc387232  Message-Authenticator = 0x00000000000000000000000000000000  State = 0xb27c20a6b66a394a0ab57f4dc80f905e Finished request 4. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.191.8.187 port 1025, id=20, length=151  EAP-Message = 0x0216001119800000000715030100020200  State = 0xb27c20a6b66a394a0ab57f4dc80f905e  NAS-Port-Type = Ethernet  User-Name = "deva"  NAS-IP-Address = 10.191.8.187  NAS-Port = 2  Framed-MTU = 1000  NAS-Port-Id = "Port 2"  Calling-Station-Id = "00-c0-ee-66-09-b6"  Called-Station-Id = "00-22-6b-33-ee-0d"  Message-Authenticator = 0x2ad8b97864739fa1946164e479a487bb +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "deva", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 22 length 17 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS   TLS Length 7 [peap] Length Included [peap] eaptls_verify returned 11 [peap] >>> TLS 1.0 Alert [length 0002], fatal decryption_failed  TLS Alert write:fatal:decryption failed [peap] SSL_read Error [peap] eaptls_process returned 4 [peap] EAPTLS_OTHERS [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject]  expand: %{User-Name} -> deva  attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 5 for 1 seconds Going to the next request Waking up in 0.9 seconds. end of logs .................... Date: Wed, 10 Feb 2010 00:38:47 +0100 From: Alan DeKok <aland@deployingradius.com> Subject: Re: freeradius with PEAP configuration To: FreeRadius users mailing list     <freeradius-users@lists.freeradius.org> Message-ID: <4B71F207.6050108@deployingradius.com> Content-Type: text/plain; charset=ISO-8859-1 dev nath wrote:

I am trying to authenticate Xsupplicant (open1x) through freeradius using EAP-PEAP-MSCHAPv2 configs. TLS initial connection was successful but MSCHAP-v2 authentication was not initiating (Xsupplicant returned TLS application packet not decrypted).

  Knowing the real error message would help.

PLEASE HELP with correct freeradius configurations required. I was not able to google the appropriate configurations for the same. Please provide me with config files with some working PEAP configurations(radiusd.conf, eap.conf, user, clients.conf)

  In 2.1.x, the *default* configuration works for PEAP.  See also my web site for step-by-step instructions on getting PEAP to work: http://deployingradius.com   Alan DeKok. ------------------------------