Hi, I am using a radius-openldap-EAP/TTLS|EAP/PEAP scheme and often I've got the following error from a Windows 7 client trying to connect using EAP/PEAP. Client lacked CA cert, but I've found clients that are able to import it. Finally client connected using EAP/TTLS with SecureW2. But I wonder if there was a problem with the client or there are a misconfiguration or a failing certificate. Below my data, thanks in advance! /var/log/radius/radius.log Thu May 13 11:18:07 2010 : Error: TLS Alert read:fatal:unknown CA Thu May 13 11:18:07 2010 : Error: TLS_accept:failed in SSLv3 read client certificate A Thu May 13 11:18:07 2010 : Error: rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca Thu May 13 11:18:07 2010 : Error: SSL: SSL_read failed inside of TLS (-1), TLS session fails. Thu May 13 11:18:49 2010 : Error: TLS Alert read:fatal:unknown CA Thu May 13 11:18:49 2010 : Error: TLS_accept:failed in SSLv3 read client certificate A Thu May 13 11:18:49 2010 : Error: rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca Thu May 13 11:18:49 2010 : Error: SSL: SSL_read failed inside of TLS (-1), TLS session fails. My radius Configuration: FreeRADIUS Version 2.1.1, for host x86_64-unknown-linux-gnu, built on Oct 21 2008 at 15:14:37 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/status including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap group = radiusd user = radiusd including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = yes auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client spectrum { require_message_authenticator = no secret = "testing123" shortname = "spectrum.sarlanga.edu" } client 10.128.255.100 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "sarlanga2-PB" } client 10.128.255.10 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "sarlanga2-SS" } client 10.128.255.11 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "sarlanga2-1" } client 10.128.255.254 { require_message_authenticator = no secret = "akantilad0-Black-58" shortname = "Transitional" } client 10.128.255.12 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "sarlanga2-2" } client 10.128.255.13 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "sarlanga2-3" } client 10.128.255.14 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "sarlanga2-4" } client 10.128.255.15 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "sarlanga2-5" } client 10.128.255.60 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "UP-Sociales-PB" } client 10.128.255.61 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "UP-Sociales-I" } client 10.128.255.158 { require_message_authenticator = no secret = "sarlangalad0-Red-3-road" shortname = "sarlanga-SS" } client 10.128.255.80 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-PB" } client 10.128.255.89 { require_message_authenticator = no secret = "akantilad0-Black-58" shortname = "oficina" } client 10.128.255.81 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-I" } client 10.128.255.82 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-II" } client 10.128.255.83 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-III" } client 10.128.255.84 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-IV" } client 10.128.255.128 { require_message_authenticator = no secret = "sarlangalad0-Red-3" shortname = "testing" } client 10.128.255.181 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-I_bis" } client 10.128.255.86 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-VI" } client 10.128.255.87 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-VII" } client 10.128.255.85 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-V" } client 10.128.255.188 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-VIII-Bis" } client 10.128.255.88 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-VIII" } client 192.168.2.53 { require_message_authenticator = no secret = "akantilad0-Green-22" shortname = "sarlanga3" } client 192.168.45 { require_message_authenticator = no secret = "sarlangalad0-black-54" shortname = "sarlanga4" } client 192.168.3.201 { require_message_authenticator = no secret = "sarlangalad0-blue-246692" shortname = "sarlanga7" } client 192.168.4 { require_message_authenticator = no secret = "sarlangalad0-Red-3" shortname = "UP-sarlanga7" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server status { modules { Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_always Module: Instantiating ok always ok { rcode = "ok" simulcount = 0 mpp = no } } } server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "ldap.sarlanga.edu" port = 636 password = "sarlanga" identity = "cn=freeradius,ou=applications,dc=sarlanga,dc=edu" net_timeout = 10 timeout = 120 timelimit = 30 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no cacertfile = "/etc/raddb/cacert.pem" randfile = "/dev/urandom" require_cert = "demand" } basedn = "ou=people,dc=sarlanga,dc=edu" filter = "(uid=%u)" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr = "radiusAllowed" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap_debug = 40 ldap_connections_number = 15 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusPassword mapped to RADIUS Cleartext-Password conns: 0x1f67aab0 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "ttls" timer_expire = 600 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/pki/tls/certs/ips-spectrum-key.pem" certificate_file = "/etc/pki/tls/certs/spectrum.sarlanga.edu.cer" CA_file = "/etc/pki/tls/certs/IPS-IPSCABUNDLE.crt" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = yes lifetime = 6 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel-peap" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating post_proxy_log detail post_proxy_log { detailfile = "/usr/local/var/log/radius/radacct/postproxy/%{Client-IP-Address}/post-proxy-detail-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking post-auth {...} for more modules to load Module: Instantiating reply_log detail reply_log { detailfile = "/usr/local/var/log/radius/radacct/replies/%{Client-IP-Address}/reply-detail-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } server inner-tunnel-peap { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating auth_log detail auth_log { detailfile = "/usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 192.168.1.5 port = 0 } listen { type = "acct" ipaddr = 192.168.1.5 port = 0 } listen { type = "status" ipaddr = 127.0.0.1 port = 18120 client admin { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "YellowSubmarine" } } Listening on authentication address 192.168.1.5 port 1812 Listening on accounting address 192.168.1.5 port 1813 Listening on status address 127.0.0.1 port 18120 as server status Ready to process requests. You can read wireshark dump on: http://pastebin.com/ZH2SfTFq Thanks in advance -- -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com Sergio Belkin - -- -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -
I am using a radius-openldap-EAP/TTLS|EAP/PEAP scheme and often I've got the following error from a Windows 7 client trying to connect using EAP/PEAP. Client lacked CA cert, but I've found clients that are able to import it. Finally client connected using EAP/TTLS with SecureW2. But I wonder if there was a problem with the client or there are a misconfiguration or a failing certificate. Below my data, thanks in advance!
/var/log/radius/radius.log
Thu May 13 11:18:07 2010 : Error: TLS Alert read:fatal:unknown CA Thu May 13 11:18:07 2010 : Error: TLS_accept:failed in SSLv3 read client certificate A Thu May 13 11:18:07 2010 : Error: rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca Thu May 13 11:18:07 2010 : Error: SSL: SSL_read failed inside of TLS (-1), TLS session fails. Thu May 13 11:18:49 2010 : Error: TLS Alert read:fatal:unknown CA Thu May 13 11:18:49 2010 : Error: TLS_accept:failed in SSLv3 read client certificate A Thu May 13 11:18:49 2010 : Error: rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca Thu May 13 11:18:49 2010 : Error: SSL: SSL_read failed inside of TLS (-1), TLS session fails.
I believe I have exactly the same issue; only Windows 7 clients are affected. Windows XP, Windows Vista and iPhone all work fine. I believe that the issue is my unsigned server certificate. In the previous Windows versions I can do an initially unsuccessful connect to the network, then disable the checkbox "validate server certificate", reconnect and it will work. When I connect with Windows 7, it will fail just like in XP, but the network won't be added to the list and I never get to uncheck that checkbox. I'm currently trying to set the network up manually, but I'm not getting this to work either atm. I'll attach the full debug log from the initial attempt below. ---- debug log -------------------------------------- FreeRADIUS Version 2.0.4, for host i486-pc-linux-gnu, built on Sep 7 2008 at 23:35:34 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/listen.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including configuration file /etc/freeradius/eap.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 25600 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" user = "freerad" group = "freerad" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no security { max_attributes = 200 reject_delay = 1 status_server = yes } } client 192.168.90.0/24 { require_message_authenticator = no secret = "foobar" } client 127.0.0.0/8 { require_message_authenticator = no secret = "foobar" } radiusd: #### Loading Realms and Home Servers #### realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.crt" CA_file = "/etc/freeradius/certs/ca.pem" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/dev/null" preproxy_usersfile = "/dev/null" compat = "no" } Module: Linked to module rlm_passwd Module: Instantiating etc_smbpasswd passwd etc_smbpasswd { filename = "/etc/freeradius/smbpasswd" format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::" delimiter = ":" ignorenislike = no ignoreempty = yes allowmultiplekeys = no hashsize = 0 } rlm_passwd: nfields: 7 keyfield 0(User-Name) listable: no Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } server { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Checking authorize {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_exec Module: Instantiating log_reject exec log_reject { wait = yes program = "/usr/lib/iserv/radius_log REJECT %{User-Name}" input_pairs = "request" output_pairs = "none" shell_escape = yes } Module: Instantiating log_accept exec log_accept { wait = yes program = "/usr/lib/iserv/radius_log ACCEPT %{User-Name}" input_pairs = "request" output_pairs = "none" shell_escape = yes } } } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 192.168.90.13 port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 0 } main { snmp = no smux_password = "" snmp_write_access = no } Listening on authentication address 192.168.90.13 port 1812 Listening on authentication address 127.0.0.1 port 1812 Ready to process requests. rad_recv: Access-Request packet from host 192.168.90.98 port 3072, id=0, length=125 User-Name = "martin" NAS-IP-Address = 192.168.90.98 Called-Station-Id = "001d7ea22ebc" Calling-Station-Id = "0026c6c479bc" NAS-Identifier = "001d7ea22ebc" NAS-Port = 1 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200000b016d617274696e Message-Authenticator = 0x92ec68158ead6ecf1b0491c7fa27024b +- entering group authorize rlm_eap: EAP packet type response id 0 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.90.98 port 3072 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7c1635d37c172cabbfed43f879d27e85 Finished request 0. Going to the next request Waking up in 5.0 seconds. rad_recv: Access-Request packet from host 192.168.90.98 port 3072, id=0, length=247 Cleaning up request 0 ID 0 with timestamp +23 User-Name = "martin" NAS-IP-Address = 192.168.90.98 Called-Station-Id = "001d7ea22ebc" Calling-Station-Id = "0026c6c479bc" NAS-Identifier = "001d7ea22ebc" NAS-Port = 1 Framed-MTU = 1400 State = 0x7c1635d37c172cabbfed43f879d27e85 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201007319800000006916030100640100006003014c03f848577401a841bd8e334e027c0676df1fc03a46a87e20441b00ff17942c000018002f00350005000ac013c014c009c00a00320038001300040100001f0000000b00090000066d617274696e000a0006000400170018000b00020100 Message-Authenticator = 0x132e26d65dac71087c2a041de66be471 +- entering group authorize rlm_eap: EAP packet type response id 1 length 115 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 105 rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0064], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 035f], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.90.98 port 3072 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x726f6f7440646576322e69736572762e6575305c300d06092a864886f70d0101010500034b003048024100db6318cc3896336b22f774da30a94cf067b19e41f1252009857cd4f602b31a2e01924965f09f72ea06caf05a90703839b9db5d612c1e4801633909b8cc1c31c70203010001300d06092a864886f70d0101050500034100346403a767744cb21a8095d2f2e9da53dda88f0b30a77803a3babbae5d80b2942ef3e74d4b97084f2eb89280aadcbf7411562ddedaf4093e4a2102996e7bfa5d16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7c1635d37d142cabbfed43f879d27e85 Finished request 1. Going to the next request Waking up in 5.0 seconds. rad_recv: Access-Request packet from host 192.168.90.98 port 3072, id=0, length=149 Cleaning up request 1 ID 0 with timestamp +23 User-Name = "martin" NAS-IP-Address = 192.168.90.98 Called-Station-Id = "001d7ea22ebc" Calling-Station-Id = "0026c6c479bc" NAS-Identifier = "001d7ea22ebc" NAS-Port = 1 Framed-MTU = 1400 State = 0x7c1635d37d142cabbfed43f879d27e85 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202001119800000000715030100020230 Message-Authenticator = 0x8db878e93c0f7d6931687e39c5ae3b06 +- entering group authorize rlm_eap: EAP packet type response id 2 length 17 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS TLS Length 7 rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert read:fatal:unknown CA TLS_accept:failed in SSLv3 read client certificate A rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca rlm_eap_tls: SSL_read failed inside of TLS (-1), TLS session fails. eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED rlm_eap: Freeing handler ++[eap] returns reject auth: Failed to validate the user. Login incorrect: [martin/<via Auth-Type = EAP>] (from client 192.168.90.0/24 port 1 cli 0026c6c479bc) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> martin attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated expand: %{User-Name} -> martin Exec-Program output: Exec-Program: returned: 0 ++[log_reject] returns ok Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 0 to 192.168.90.98 port 3072 EAP-Message = 0x04020004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 4.9 seconds. Cleaning up request 2 ID 0 with timestamp +23 Ready to process requests. -- Mit freundlichen Grüßen, Martin v. Wittich IServ GmbH Rebenring 33 38106 Braunschweig Telefon: +49 531 380 4450 E-Mail: martin.von.wittich@iserv.eu Internet: http://www.iserv.eu
Martin v. Wittich wrote:
I believe I have exactly the same issue; only Windows 7 clients are affected. Windows XP, Windows Vista and iPhone all work fine.
I believe that the issue is my unsigned server certificate. In the previous Windows versions I can do an initially unsuccessful connect to the network, then disable the checkbox "validate server certificate", reconnect and it will work. When I connect with Windows 7, it will fail just like in XP, but the network won't be added to the list and I never get to uncheck that checkbox.
You should install the root CA *first*. See http://deployingradius.com/documents/configuration/eap.html
I'm currently trying to set the network up manually, but I'm not getting this to work either atm. I'll attach the full debug log from the initial attempt below.
The Windows 7 machine is stopping the EAP conversation for reasons known only to it. Maybe the Windows eaphost tracing will help... http://deployingradius.com/documents/configuration/eap-problems.html Alan DeKok.
You should install the root CA *first*. See
http://deployingradius.com/documents/configuration/eap.html
I'm currently trying to set the network up manually, but I'm not getting this to work either atm. I'll attach the full debug log from the initial attempt below.
The Windows 7 machine is stopping the EAP conversation for reasons known only to it. Maybe the Windows eaphost tracing will help...
http://deployingradius.com/documents/configuration/eap-problems.html
OK, I've found the issue - Windows 7 doesn't like the certificates that my script is generating. When I recreate the certs using freeradius' Makefile, it works. -- Mit freundlichen Grüßen, Martin von Wittich IServ GmbH Rebenring 33 38106 Braunschweig Telefon: 0531 - 38 044 50 Fax: 0531 - 42 877 45 E-Mail: martin.von.wittich@iserv.eu Internet: www.iserv.eu
participants (4)
-
Alan DeKok -
Martin v. Wittich -
martin.von.wittich＠iserv.eu
-
Sergio Belkin