Hello, I have installed debian lenny with freeradius 2.0.4-3: /etc/freeradius# dpkg -l | grep freeradius hi freeradius 2.0.4-3 a high-performance and highly configurable RADIUS server hi freeradius-common 2.0.4-3 FreeRadius common files hi freeradius-ldap 2.0.4-3 LDAP module for FreeRADIUS server hi freeradius-mysql 2.0.4-3 MySQL module for FreeRADIUS server hi freeradius-utils 2.0.4-3 FreeRadius client utilities hi libfreeradius-dev 2.0.4-3 FreeRADIUS shared library development files hi libfreeradius2 2.0.4-3 FreeRADIUS shared library and I can't run the default configuration following this instructions http://deployingradius.com/documents/configuration/pap.html Here is my debug information: /etc/freeradius# freeradius -X FreeRADIUS Version 2.0.4, for host x86_64-pc-linux-gnu, built on Oct 20 2009 at 11:45:11 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including configuration file /etc/freeradius/snmp.conf including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" user = "freerad" group = "freerad" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = yes input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { modules { } } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } main { snmp = no smux_password = "" snmp_write_access = no } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 53599, id=186, length=55 User-Name = "bob" User-Password = "hello" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect: [bob/hello] (from client localhost port 0) Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 186 to 127.0.0.1 port 53599 Waking up in 4.9 seconds. Cleaning up request 0 ID 186 with timestamp +4 Ready to process requests. My request: $ radtest bob hello localhost 0 testing123 Sending Access-Request of id 186 to 127.0.0.1 port 1812 User-Name = "bob" User-Password = "hello" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=186, length=20 Thankyou very much and sorry for my english -- ____________________ Ana Gallardo Gómez ____________________