Hello, Check your sql configuration in sql.conf in the following area # Connect info server = "yousqlip" login = "user" password = "pws" Abdul Lateef Kapilvastu Lumbini __________________________________ Discover Yahoo! Find restaurants, movies, travel and more fun for the weekend. Check it out! http://discover.yahoo.com/weekend.html
Thank you I just finished it successfully. Actually the problem was with the sql server.Now I am defining the attribute " Max-All-Session" in seconds. That means I am defining time limitations. [Prepaid].But what I want is that I will make a user and it can surf unlimited.But the total time should be automatically appended in my sql.What is the "Attribute" for this and the "Value" also. And can we define time limitations in minutes/hours Hello, Check your sql configuration in sql.conf in the following area # Connect info server = "yousqlip" login = "user" password = "pws" Abdul Lateef Kapilvastu Lumbini __________________________________ Discover Yahoo! Find restaurants, movies, travel and more fun for the weekend. Check it out! http://discover.yahoo.com/weekend.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi everybody, as frequently here, an other EAP-TTLS problem ;) I use WinXP + SecureW2 + Cisco AP1100 + freeRADIUS 1.0.1 & 1.0.2 freeradius see TLS packet but it's EAP-TTLS (with PAP) so authentication doesn't works. Of course eap is set in radiusd.conf (authentication and authorization section) My eap.conf is here : eap { default_eap_type = ttls timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no # Supported EAP-types md5 { } # EAP-TLS tls { # default_eap_type = ttls private_key_password = astronomie private_key_file = ${raddbdir}/certs/vega.maquette.grenet.fr.pem certificate_file = ${raddbdir}/certs/vega.maquette.grenet.fr.pem CA_file = ${raddbdir}/certs/root.pem dh_file = ${raddbdir}/certs/dh random_file = ${raddbdir}/certs/random fragment_size = 1024 include_length = yes # check_crl = yes # check_cert_cn = %{User-Name} } ttls { default_eap_type = md5 copy_request_to_tunnel = yes use_tunneled_reply = yes } #peap { # default_eap_type = mschapv2 #} #mschapv2 { #} } When I launch radiusd -X, this is what it says : ... Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/raddb/certs/vega.maquette.grenet.fr.pem" tls: certificate_file = "/etc/raddb/certs/vega.maquette.grenet.fr.pem" tls: CA_file = "/etc/raddb/certs/root.pem" tls: private_key_password = "astronomie" tls: dh_file = "/etc/raddb/certs/dh" tls: random_file = "/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "md5" ttls: copy_request_to_tunnel = yes ttls: use_tunneled_reply = yes rlm_eap: Loaded and initialized type ttls Module: Instantiated eap (eap) ... When I try to authenticate, is below... rad_recv: Access-Request packet from host 10.1.1.2:21672, id=106, length=132 User-Name = "david" Framed-MTU = 1400 Called-Station-Id = "000e.8440.bbb0" Calling-Station-Id = "000d.54aa.a39c" Service-Type = Login-User Message-Authenticator = 0x150c704b98ad730ead5764e4be788835 EAP-Message = 0x0202000a016461766964 NAS-Port-Type = Wireless-802.11 NAS-Port = 7080 NAS-IP-Address = 10.1.1.2 NAS-Identifier = "ap-maquette" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "david", looking up realm NULL rlm_realm: Found realm "NULL" rlm_realm: Adding Stripped-User-Name = "david" rlm_realm: Proxying request from user david to realm NULL rlm_realm: Adding Realm = "NULL" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 2 length 10 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched david at 19 modcall[authorize]: module "files" returns ok for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: EAP Identity rlm_eap: processing type tls <========= why ? it should be TTLS !!! rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 106 to 10.1.1.2:21672 Service-Type = Framed-User Framed-MTU = 1500 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "402" EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdcb2b96e379c8bc2dcb4b5b405a23cab Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... ... (fall in timeout and process repeat again and again) Can someone help me ? how can I debug more ? thanks.
participants (3)
-
Abdul Lateef -
David ROUMANET -
Rupak