Hi, What does teh FAILURE at the end of the eapol test result mean? But, the eap authentication is successful as shown in green color below. ________________________________ .... ........ RADIUS packet matching with station MS-MPPE-Send-Key (sign) - hexdump(len=32): 11 57 03 9f b7 b4 cb ef 7a 51 fc c3 34 c4 b5 57 6a a7 08 59 a9 5f 97 cc d9 73 8c 6e e7 d5 f1 f9 MS-MPPE-Recv-Key (crypt) - hexdump(len=32): 1b a9 25 20 bf b1 76 b8 d5 88 3f f2 95 85 4e 59 5a a0 fe 55 ec 38 e5 8f e0 ac 31 3f 57 cf 77 c2 decapsulated EAP packet (code=3 id=4 len=4) from RADIUS server: EAP Success EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Success EAP: EAP entering state SUCCESS CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state RECEIVE EAPOL: SUPP_BE entering state SUCCESS EAPOL: SUPP_BE entering state IDLE eapol_sm_cb: success=1 EAPOL: Successfully fetched key (len=32) PMK from EAPOL - hexdump(len=32): 1b a9 25 20 bf b1 76 b8 d5 88 3f f2 95 85 4e 59 5a a0 fe 55 ec 38 e5 8f e0 ac 31 3f 57 cf 77 c2 EAPOL test timed out EAPOL: Successfully fetched key (len=32) PMK from EAPOL - hexdump(len=32): 1b a9 25 20 bf b1 76 b8 d5 88 3f f2 95 85 4e 59 5a a0 fe 55 ec 38 e5 8f e0 ac 31 3f 57 cf 77 c2 EAP: deinitialize previously used EAP method (13, TLS) at EAP deinit ENGINE: engine deinit MPPE keys OK: 220 mismatch: 0 FAILURE ________________________________ thanks, rc.