[Freeradius-Users]modcall[authenticate]: module "unix" returns notfound for request
Hi, All! When I wanna run freeradius with the support of MySQL, I found such mes * modcall[authenticate]: module "unix" returns notfound for request 12 modcall: group authenticate returns notfound for request 12 * in "radiusd -X" mode,but the user in USERS file can be authenticated successfully. I've googled,but not find the solution. And i've searched from the mailing list,though there're some troubleshooting too,no way to solove. So pls help! Thx in advance! Regards for everyone. jedliu Jedliureceiver@gmail.com 2006-03-06
the unix module searched for users in /etc/passwd (or whatever file you tell it to search). this has nothing to do with mysql. if you want to use the unix module, then make sure the user exists in /etc/passwd and that freeradius has read ability to that file. if you want to use mysql, then configure the mysql module. On 3/7/06, Jedliu <jedliureceiver@gmail.com> wrote:
Hi, All!
When I wanna run freeradius with the support of MySQL, I found such mes * modcall[authenticate]: module "unix" returns notfound for request 12 modcall: group authenticate returns notfound for request 12 * in "radiusd -X" mode,but the user in USERS file can be authenticated successfully. I've googled,but not find the solution. And i've searched from the mailing list,though there're some troubleshooting too,no way to solove. So pls help!
Thx in advance! Regards for everyone.
jedliu Jedliureceiver@gmail.com 2006-03-06
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Andrew Browning, Hi！ Much appreciate of your answer. you said "if you want to use mysql, then configure the mysql module". I've configured the mysql module in radiusd.conf like this, *authorize { preprocess chap mschap suffix sql } accounting { … sql … }* Is there any aditional points? I add the users into the mysql as: "insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Auth-Type’,’:=’,’Local’); insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Service-Type’,’:=’,’Framed-User’); insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Framed-IP-Address’,’:=’,’255.255.255.254’); insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Framed-IP-Netmask’,’:=’,’255.255.255.0’); insert into radcheck (username,attribute,op,value) values (‘jedliu’,’User-Password’,’:=’,’jedliu’); insert into usergroup (username,groupname) values (‘jedliu’,’user’); " When i authenticate the user, I found the mes like: " ... rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" ... Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "jedliu", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry DEFAULT at line 165 modcall[authorize]: module "files" returns ok for request 1 radius_xlat: 'jedliu' rlm_sql (sql): sql_set_user escaped user --> 'jedliu' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'jedliu' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 3 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'jedliu' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'jedliu' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'jedliu' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 3 modcall[authorize]: module "sql" returns ok for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf ************** modcall: entering group authenticate for request 1 modcall[authenticate]: module "unix" returns notfound for request 1 modcall: group authenticate returns notfound for request 1 auth: Failed to validate the user. ************** ... " So that's the problem is,i can't authenticate the user. Appreciate everyone's help. Thx. =======* 2006-03-08 Re: [Freeradius-Users]modcall[authenticate]: module "unix" returns notfound for request *=======
the unix module searched for users in /etc/passwd (or whatever file you tell it to search). this has nothing to do with mysql. if you want to use the unix module, then make sure the user exists in /etc/passwd and that freeradius has read ability to that file. if you want to use mysql, then configure the mysql module.
On 3/7/06, Jedliu <jedliureceiver@gmail.com> wrote:
Hi, All!
When I wanna run freeradius with the support of MySQL, I found such mes * modcall[authenticate]: module "unix" returns notfound for request 12 modcall: group authenticate returns notfound for request 12 * in "radiusd -X" mode,but the user in USERS file can be authenticated successfully. I've googled,but not find the solution. And i've searched from the mailing list,though there're some troubleshooting too,no way to solove. So pls help!
Thx in advance! Regards for everyone.
jedliu Jedliureceiver@gmail.com 2006-03-06
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
= = = = = = = = = = = = = = = = = = = = Jedliu 2006-03-08
Andrew Browning, Hi！ Much appreciate of your answer. you said "if you want to use mysql, then configure the mysql module". I've configured the mysql module in radiusd.conf like this, *authorize { preprocess chap mschap suffix sql } accounting { … sql … }* Is there any aditional points? I add the users into the mysql as: "insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Auth-Type’,’:=’,’Local’); insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Service-Type’,’:=’,’Framed-User’); insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Framed-IP-Address’,’:=’,’255.255.255.254’); insert into radgroupreply (groupname,attribute,op,value) values (‘user’，‘Framed-IP-Netmask’,’:=’,’255.255.255.0’); insert into radcheck (username,attribute,op,value) values (‘jedliu’,’User-Password’,’:=’,’jedliu’); insert into usergroup (username,groupname) values (‘jedliu’,’user’); " When i authenticate the user, I found the mes like: " ... rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" ... Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "jedliu", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry DEFAULT at line 165 modcall[authorize]: module "files" returns ok for request 1 radius_xlat: 'jedliu' rlm_sql (sql): sql_set_user escaped user --> 'jedliu' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'jedliu' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 3 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'jedliu' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'jedliu' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'jedliu' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 3 modcall[authorize]: module "sql" returns ok for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf ************** modcall: entering group authenticate for request 1 modcall[authenticate]: module "unix" returns notfound for request 1 modcall: group authenticate returns notfound for request 1 auth: Failed to validate the user. ************** ... " So that's the problem is,i can't authenticate the user. Appreciate everyone's help. Thx. =======* 2006-03-08 Re: [Freeradius-Users]modcall[authenticate]: module "unix" returns notfound for request *=======
the unix module searched for users in /etc/passwd (or whatever file you tell it to search). this has nothing to do with mysql. if you want to use the unix module, then make sure the user exists in /etc/passwd and that freeradius has read ability to that file. if you want to use mysql, then configure the mysql module.
On 3/7/06, Jedliu <jedliureceiver@gmail.com> wrote:
Hi, All!
When I wanna run freeradius with the support of MySQL, I found such mes * modcall[authenticate]: module "unix" returns notfound for request 12 modcall: group authenticate returns notfound for request 12 * in "radiusd -X" mode,but the user in USERS file can be authenticated successfully. I've googled,but not find the solution. And i've searched from the mailing list,though there're some troubleshooting too,no way to solove. So pls help!
Thx in advance! Regards for everyone.
jedliu Jedliureceiver@gmail.com 2006-03-06
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
= = = = = = = = = = = = = = = = = = = = Jedliu 2006-03-08
participants (2)
-
Andrew Browning -
Jedliu