Still unable to get this to work via freeradius, but works with ntlm_auth from the command line. [root@phllnxsrv01 raddb]# ntlm_auth --username="test ops" --password=m1sg0ps --domain=usmisgnet --request-NT-key NT_STATUS_OK: Success (0x0) BUT wbinfo -a "ken george"%262144 plaintext password authentication failed error code was NT_STATUS_NO_SUCH_USER (0xc0000064) error messsage was: No such user Could not authenticate user ken george%262144 with plaintext password challenge/response password authentication succeeded Is this a samba/winbindd/Windows 2003 issue or is my freeradius configuration still lacking?? radiusd.conf exec win_domain { wait = yes input_pairs = request output_pairs = reply program = "/usr/bin/ntlm_auth --username=\"%{User-Name}\" --password=\"%{User-Password}\" --domain=usmisgnet" } . . . # Auth-Type win_domain { win_domain } # In the users file # DEFAULT Auth-Type = win_domain # radtest "test ops" m1sg0ps localhost 0 xxxxxx [root@phllnxsrv01 raddb]# radiusd -xxyz -l stdout Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = yes main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "before" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --domain=%{mschap:NT-Domain} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" Module: Instantiated mschap (mschap) exec: wait = yes exec: program = "/usr/bin/ntlm_auth --username="%{User-Name}" --password="%{User-Password}" --domain=usmisgnet" exec: input_pairs = "request" exec: output_pairs = "reply" exec: packet_type = "(null)" Module: Instantiated exec (win_domain) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = yes preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = yes Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) realm: format = "prefix" realm: delimiter = "\" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (ntdomain) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Initializing the thread pool... thread: start_servers = 5 thread: max_servers = 32 thread: min_spare_servers = 3 thread: max_spare_servers = 10 thread: max_requests_per_server = 0 thread: cleanup_delay = 5 Thread 1 waiting to be assigned a request Thread spawned new child 1. Total threads in pool: 1 Thread 2 waiting to be assigned a request Thread spawned new child 2. Total threads in pool: 2 Thread 3 waiting to be assigned a request Thread spawned new child 3. Total threads in pool: 3 Thread 4 waiting to be assigned a request Thread spawned new child 4. Total threads in pool: 4 Thread 5 waiting to be assigned a request Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:32785, id=139, length=60 --- Walking the entire request list --- Waking up in 31 seconds... Threads: total/active/spare threads = 5/0/5 Thread 1 got semaphore Thread 1 handling request 0, (1 handled so far) User-Name = "test ops" User-Password = "xxxxxx" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 rad_lowerpair: User-Name now 'test ops' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test ops", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_realm: No '\' in User-Name = "test ops", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "ntdomain" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched DEFAULT at 204 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type win_domain auth: type "win_domain" Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 0 radius_xlat: '/usr/bin/ntlm_auth --username="test ops" --password="xxxxxx" --domain=usmisgnet' Exec-Program: /usr/bin/ntlm_auth --username="test ops" --password="xxxxxx" --domain=usmisgnet Exec-Program output: NT_STATUS_NO_SUCH_USER: No such user (0xc0000064) Exec-Program-Wait: plaintext: NT_STATUS_NO_SUCH_USER: No such user (0xc0000064) Exec-Program: returned: 1 rlm_exec (win_domain): External script failed modcall[authenticate]: module "win_domain" returns fail for request 0 modcall: group Auth-Type returns fail for request 0 auth: Failed to validate the user. Login incorrect: [test ops] (from client localhost port 0) Delaying request 0 for 1 seconds Finished request 0 Going to the next request Thread 1 waiting to be assigned a request rad_recv: Access-Request packet from host 127.0.0.1:32785, id=139, length=60 Sending Access-Reject of id 139 to 127.0.0.1:32785 --- Walking the entire request list --- Waking up in 3 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 139 with timestamp 42d682b2 Nothing to do. Sleeping until we see a request. Ken George Systems and Network Engineering Mi Services Group, Inc. +1 610-230-2500 x129