Hi, I'm setting up a connection based on linux with openswan and an XP box. Everything is okay, when I'm using the "use default gateway on the remote network" option on the XP side. But I don't want to use it because I have another connection to a standard internet and the ipsec one breaks it this way. What I want to do, is to force radius to set a static route on the XP box after setting the tunnel up. But it doesn't. so,here's the scenario: no framed-route, after setting the tunnel manually adding: "route add ...." on XP box. WORKS FINE. framed-route, setting up connection, (the static route doesn't work - does not show up in the routing table), manually adding static route like before... does NOT work. weird, isn't it? Moreover, I have tried using many forms of Framed-Route, and none of these work for XP (after none of these appriopriate route shows up in the route table on the windows box). Here's my user section : tester Auth-Type := Local, User-Password == "test3ingXXX" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = "10.20.30.1", Framed-IP-Netmask = "255.255.255.255", Framed-Route = "1.2.3.4 255.255.255.255 1", Framed-MTU = 1500, Framed-Compression = Van-Jacobsen-TCP-IP Any ideas would be apprieciated :) Thanks.