Hi I use an AAA infrastructure based on FreeRADIUS, OpenLDAP and pam on some freebsd machines. All worked fine untill i upgraded FreeRADIUS form 1.0.5 to 1.1.0. From there on i cannot authenticate because the Auth-Type attribute is no more valorized to LDAP by the ldap module during authorize section. This is the error: rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 85.239.184.44:636, authentication 0 rlm_ldap: setting TLS mode to 1 rlm_ldap: bind as / to 85.239.184.44:636 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in dc=ifom-ieo-campus,dc=it, with filter (uid=futhwo) rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusAuthType as Auth-Type, value ldap & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusServiceType as Service-Type, value Shell-User & op=11 rlm_ldap: extracted attribute Cisco-AVPair from generic item cisco- avpair="shell:priv-lvl=15" rlm_ldap: user futhwo authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Delaying request 0 for 1 seconds and this is the definition of ldap module in radiusd.conf: ldap { server = "XX.XX.XX.XX" port = 636 basedn = "dc=ifom-ieo-campus,dc=it" start_tls = no dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_connections_number = 5 groupmembership_filter = "(memberuid=%{User-Name})" access_attr_used_for_allow = no set_auth_type = yes } I tried also to change the last 2 directives but it didn't worked. Another thing i tried (as can be seen in the output) is to set the attribute radiusAuthType to "ldap" in the user entry, and/or to set the directive "authtype = LDAP" in the module definition but still didn't work Lurking in the dictionaries,i found this in dictionary.freeradius.internal: VALUE Auth-Type CHAP 1025 # 1026 was LDAP, but we deleted it. Adding it back will break the # ldap module. VALUE Auth-Type PAM 1027 as he author said manually adding the Auth-Type ldap definition prevent the server from starting. So if the Auth-Type LDAP is no more defined,how can i perform authentication against a LDAP server? Thanks in advance to who will help me Regards Ivan