so...you are checking the user data in the inner-tunnel (good) - and are setting the value there.... so , you just need to copy those values to the outer phase (or just copy them to outer:reply ) - the default/vanilla config has some examples of this in the configuration files. alan On 15 May 2018 at 15:29, Daniel Lietz <dlietz@inghamisd.org> wrote:

Here is the complete debug from starting radiusd -X to the device getting on the network. The user jdoe authenticates, and gets an IP address, but it's an IP on the native vlan (10.2.1.x) rather than the vlan the user should be on (vlan tag 522). Users have the radiusTunnelPrivateGroupId attribute set in eDirectory to the vlan tag for the network they should be allowed on. With my production server, the attribute is sent to the aruba controller and is used to place the device on the appropriate vlan. With my new test server, the device always ends up on the native vlan, (vlan 1) which is the access point management network.

radiusd: FreeRADIUS Version 3.0.3, for host x86_64-suse-linux-gnu, built on Dec 19 2016 at 11:19 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client ArubaComEd { ipaddr = 10.2.1.1 netmask = 32 require_message_authenticator = no secret = <<< secret >>> shortname = "ArubaComEd" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_ filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_ filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/ detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/ detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/ detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/servercert.pem" certificate_file = "/etc/raddb/certs/servercert.pem" ca_file = "/etc/raddb/certs/rootCAcert.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/ expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCD EFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:198 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:198 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/ linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/ logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/ preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/ radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/ replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/ sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "10.1.1.10" port = 636 password = <<< secret >>> identity = "cn=freeRadius,o=ORG" edir = yes edir_autz = yes user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "o=ORG" access_attribute = "dialupAccess" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "o=ORG" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "o=ORG" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/rootCAcert.pem" ca_path = "/etc/raddb/certs" start_tls = no require_cert = "demand" } } accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap): Opening additional connection (0) rlm_ldap (ldap): Connecting to 10.1.1.10:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1) rlm_ldap (ldap): Connecting to 10.1.1.10:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2) rlm_ldap (ldap): Connecting to 10.1.1.10:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3) rlm_ldap (ldap): Connecting to 10.1.1.10:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4) rlm_ldap (ldap): Connecting to 10.1.1.10:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = LDAP # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 37067 Ready to process requests. Received Access-Request Id 42 from 10.2.1.1:58610 to 10.1.1.12:1812 length 201 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0201000c016c6965747a6462 Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0x388b1133b22e9b707fe063bb62990d51 (0) # Executing section authorize from file /etc/raddb/sites-enabled/ default (0) authorize { (0) filter_username filter_username { (0) if (User-Name != "%{tolower:%{User-Name}}") (0) EXPAND %{tolower:%{User-Name}} (0) --> jdoe (0) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (0) if (User-Name =~ / /) (0) if (User-Name =~ / /) -> FALSE (0) if (User-Name =~ /@.*@/ ) (0) if (User-Name =~ /@.*@/ ) -> FALSE (0) if (User-Name =~ /\\.\\./ ) (0) if (User-Name =~ /\\.\\./ ) -> FALSE (0) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (0) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (0) if (User-Name =~ /\\.$/) (0) if (User-Name =~ /\\.$/) -> FALSE (0) if (User-Name =~ /@\\./) (0) if (User-Name =~ /@\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) eap : EAP packet type response id 1 length 12 (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap : Peer sent Identity (1) (0) eap : Calling eap_peap to process EAP data (0) eap_peap : Flushing SSL sessions (of #0) (0) eap_peap : Initiate (0) eap_peap : Start returned 1 (0) eap : New EAP session, adding 'State' attribute to reply 0x0334791e03366016 (0) [eap] = handled (0) } # authenticate = handled Sending Access-Challenge Id 42 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e033660161c87c4227f6edc6f (0) Finished request Waking up in 0.3 seconds. Received Access-Request Id 43 from 10.2.1.1:58610 to 10.1.1.12:1812 length 374 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020200a719800000009d16030100 98010000940303d5a687ae569b08a5074447a11fbb36162b46752e9353f8 8d07f7bcf8e620ac1700003cc02bc02f009ec02cc030009fcca9cca8c009 c023c013c02700330067c00ac024c014c0280039006bc007c011009c009d 002f003c0035003d0005000a0100002fff0100010000170000000d001000 0e0403040105030501060306010201000b00020100000a00080006001d00170018 State = 0x0334791e033660161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0xf36c20a6d78beca0e2ac1782d6593291 (1) # Executing section authorize from file /etc/raddb/sites-enabled/ default (1) authorize { (1) filter_username filter_username { (1) if (User-Name != "%{tolower:%{User-Name}}") (1) EXPAND %{tolower:%{User-Name}} (1) --> jdoe (1) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (1) if (User-Name =~ / /) (1) if (User-Name =~ / /) -> FALSE (1) if (User-Name =~ /@.*@/ ) (1) if (User-Name =~ /@.*@/ ) -> FALSE (1) if (User-Name =~ /\\.\\./ ) (1) if (User-Name =~ /\\.\\./ ) -> FALSE (1) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (1) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (1) if (User-Name =~ /\\.$/) (1) if (User-Name =~ /\\.$/) -> FALSE (1) if (User-Name =~ /@\\./) (1) if (User-Name =~ /@\\./) -> FALSE (1) } # filter_username filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (1) suffix : No such realm "NULL" (1) [suffix] = noop (1) eap : EAP packet type response id 2 length 167 (1) eap : Continuing tunnel setup. (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = EAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap : Expiring EAP session with state 0x0334791e03366016 (1) eap : Finished EAP session with state 0x0334791e03366016 (1) eap : Previous EAP request found for state 0x0334791e03366016, released from the list (1) eap : Peer sent PEAP (25) (1) eap : EAP PEAP (25) (1) eap : Calling eap_peap to process EAP data (1) eap_peap : processing EAP-TLS TLS Length 157 (1) eap_peap : Length Included (1) eap_peap : eaptls_verify returned 11 (1) eap_peap : (other): before/accept initialization (1) eap_peap : TLS_accept: before/accept initialization (1) eap_peap : <<< TLS 1.0 Handshake [length 0098], ClientHello (1) eap_peap : TLS_accept: SSLv3 read client hello A (1) eap_peap : >>> TLS 1.0 Handshake [length 0059], ServerHello (1) eap_peap : TLS_accept: SSLv3 write server hello A (1) eap_peap : >>> TLS 1.0 Handshake [length 0a71], Certificate (1) eap_peap : TLS_accept: SSLv3 write certificate A (1) eap_peap : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_peap : TLS_accept: SSLv3 write key exchange A (1) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap : TLS_accept: SSLv3 write server done A (1) eap_peap : TLS_accept: SSLv3 flush data (1) eap_peap : TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (1) eap_peap : eaptls_process returned 13 (1) eap_peap : FR_TLS_HANDLED (1) eap : New EAP session, adding 'State' attribute to reply 0x0334791e02376016 (1) [eap] = handled (1) } # authenticate = handled Sending Access-Challenge Id 43 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x010303ec19c000000c2d16030100 59020000550301ee2a9e46204dd651ae831c0a98e4afd98feaf4445c7c8e 75887eea342b6de4c3206fbd6ba3e4a5f3cb6fd2bfafb19a96703a87a8e0 918021bcb2964916706b1160c01300000dff01000100000b000403000102 1603010a710b000a6d000a6a0005323082052e30820416a0030201020225 021c14e16e79e3e4952b9a3ec29e5d36dce1e4bcb8d7aa4d557f0c5af1c5 020301a126d675300d06092a864886f70d0101050500302f311a30180603 55040b13114f7267616e697a6174696f6e616c2043413111300f06035504 0a14084850535f54524545301e170d3136303732353139303932315a170d 3138303732353139303932315a302c3111300f060355040a14084850535f 54524545311730150603550403130e6870735241442e6870732e646f6d30 820122300d06092a864886f70d01010105000382010f003082010a028201 0100d1b2b39358eb47a2e3fccd7c20b4023ce4798b2361dc451ea5897446 77880f1a939b4db4a6812f4313b286364ea27757dda24a52058d9cc060a6 a7a131919c490e4727bf429808871c31757ba632ed3e162b1a542b9d0ed7 0365a876e4d8999991aeca5196038e16541b2a4ac788e17e0d43eb0498df 45b34de318c63c328e66992ff7369a926018916b8c235df1b2798f842deb 97229e1018bd47824 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e023760161c87c4227f6edc6f (1) Finished request Waking up in 0.3 seconds. Received Access-Request Id 44 from 10.2.1.1:58610 to 10.1.1.12:1812 length 213 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020300061900 State = 0x0334791e023760161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0xac8694ed2e2e4490a9742ee4d843b7dd (2) # Executing section authorize from file /etc/raddb/sites-enabled/ default (2) authorize { (2) filter_username filter_username { (2) if (User-Name != "%{tolower:%{User-Name}}") (2) EXPAND %{tolower:%{User-Name}} (2) --> jdoe (2) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (2) if (User-Name =~ / /) (2) if (User-Name =~ / /) -> FALSE (2) if (User-Name =~ /@.*@/ ) (2) if (User-Name =~ /@.*@/ ) -> FALSE (2) if (User-Name =~ /\\.\\./ ) (2) if (User-Name =~ /\\.\\./ ) -> FALSE (2) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (2) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (2) if (User-Name =~ /\\.$/) (2) if (User-Name =~ /\\.$/) -> FALSE (2) if (User-Name =~ /@\\./) (2) if (User-Name =~ /@\\./) -> FALSE (2) } # filter_username filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (2) suffix : No such realm "NULL" (2) [suffix] = noop (2) eap : EAP packet type response id 3 length 6 (2) eap : Continuing tunnel setup. (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap : Expiring EAP session with state 0x0334791e02376016 (2) eap : Finished EAP session with state 0x0334791e02376016 (2) eap : Previous EAP request found for state 0x0334791e02376016, released from the list (2) eap : Peer sent PEAP (25) (2) eap : EAP PEAP (25) (2) eap : Calling eap_peap to process EAP data (2) eap_peap : processing EAP-TLS (2) eap_peap : Received TLS ACK (2) eap_peap : Received TLS ACK (2) eap_peap : ACK handshake fragment handler (2) eap_peap : eaptls_verify returned 1 (2) eap_peap : eaptls_process returned 13 (2) eap_peap : FR_TLS_HANDLED (2) eap : New EAP session, adding 'State' attribute to reply 0x0334791e01306016 (2) [eap] = handled (2) } # authenticate = handled Sending Access-Challenge Id 44 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x010403e8194058020102020200ff 020100030d00400000000000000000000000030900400000000000000030 18301002010002087fffffffffffffff010100020414e16e793018301002 010002087fffffffffffffff010100020414e16e79a24e304c0201020201 00020200ff030d0080000000000000000000000003090080000000000000 003012301002010002087fffffffffffffff010100301230100201000208 7fffffffffffffff010100300d06092a864886f70d010105050003820101 003add0b584651aee3b68efb0f001d41a8452e9e040371820552eca1d150 3b33f2497e9878b2bea84b7e5731f2e130c57ffb1d34cb872d3d396990cf 23f87205f91cc5103960ee9b68dbe80d602a255c74d7178f13609e243261 d0776367914b96f63a1ace42246a776d18f6ab049bfbb429453a536e65de df411a9b9e5bd3d540b547c2b70c96c415b94dd91e252e76f288117fe826 6f35090f8844f6afdd1b472b16f2bc70a880ee5f6b2e3b2eb3776cad8683 f658d86f468cc84b182cd4c3b9a1ba50b41a025fd25f727b64570b59bc52 f769c00aa2e2c767bb56df03f48320718089099762bbc066c170d72b5471 e4040bcc458da75641fa912ad93de4cc1e0005323082052e30820416a003 0201020225021c14e16e79e3e4952b9a3ec29e5d36dce1e4bcb8d7aa4d55 7f0c5af1c5020301a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e013060161c87c4227f6edc6f (2) Finished request Waking up in 0.2 seconds. Received Access-Request Id 45 from 10.2.1.1:58610 to 10.1.1.12:1812 length 213 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020400061900 State = 0x0334791e013060161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0x9f86941df2f404316867b64473844047 (3) # Executing section authorize from file /etc/raddb/sites-enabled/ default (3) authorize { (3) filter_username filter_username { (3) if (User-Name != "%{tolower:%{User-Name}}") (3) EXPAND %{tolower:%{User-Name}} (3) --> jdoe (3) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (3) if (User-Name =~ / /) (3) if (User-Name =~ / /) -> FALSE (3) if (User-Name =~ /@.*@/ ) (3) if (User-Name =~ /@.*@/ ) -> FALSE (3) if (User-Name =~ /\\.\\./ ) (3) if (User-Name =~ /\\.\\./ ) -> FALSE (3) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (3) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (3) if (User-Name =~ /\\.$/) (3) if (User-Name =~ /\\.$/) -> FALSE (3) if (User-Name =~ /@\\./) (3) if (User-Name =~ /@\\./) -> FALSE (3) } # filter_username filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (3) suffix : No such realm "NULL" (3) [suffix] = noop (3) eap : EAP packet type response id 4 length 6 (3) eap : Continuing tunnel setup. (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap : Expiring EAP session with state 0x0334791e01306016 (3) eap : Finished EAP session with state 0x0334791e01306016 (3) eap : Previous EAP request found for state 0x0334791e01306016, released from the list (3) eap : Peer sent PEAP (25) (3) eap : EAP PEAP (25) (3) eap : Calling eap_peap to process EAP data (3) eap_peap : processing EAP-TLS (3) eap_peap : Received TLS ACK (3) eap_peap : Received TLS ACK (3) eap_peap : ACK handshake fragment handler (3) eap_peap : eaptls_verify returned 1 (3) eap_peap : eaptls_process returned 13 (3) eap_peap : FR_TLS_HANDLED (3) eap : New EAP session, adding 'State' attribute to reply 0x0334791e00316016 (3) [eap] = handled (3) } # authenticate = handled Sending Access-Challenge Id 45 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x010503e81940682c869fb124e6eb 32c27c1931cd7fc907300c0603551d13040530030101ff300b0603551d0f 040403020106308201cc060b6086480186f83701090401048201bb308201 b7040201000101ff131d4e6f76656c6c2053656375726974792041747472 696275746528746d291643687474703a2f2f646576656c6f7065722e6e6f 76656c6c2e636f6d2f7265706f7369746f72792f61747472696275746573 2f6365727461747472735f7631302e68746d30820148a01a010100300830 060201010201463008300602010102010a020169a11a0101003008300602 010102010030083006020101020100020100a2060201180101ffa3820104 a058020102020200ff020100030d00800000000000000000000000030900 80000000000000003018301002010002087fffffffffffffff0101000204 06f0df483018301002010002087fffffffffffffff010100020406f0df48 a158020102020200ff020100030d00400000000000000000000000030900 40000000000000003018301002010002087fffffffffffffff0101000204 14e16e793018301002010002087fffffffffffffff010100020414e16e79 a24e304c020102020200ff020100030d0080ffffffffffffffffffffff03 090080ffffffffffffff3012301002010002087fffffffffffffff0101ff 30123010020100020 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e003160161c87c4227f6edc6f (3) Finished request Waking up in 0.2 seconds. Received Access-Request Id 46 from 10.2.1.1:58610 to 10.1.1.12:1812 length 213 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020500061900 State = 0x0334791e003160161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0xcfa89250dae129d83ad18906e9cf3e40 (4) # Executing section authorize from file /etc/raddb/sites-enabled/ default (4) authorize { (4) filter_username filter_username { (4) if (User-Name != "%{tolower:%{User-Name}}") (4) EXPAND %{tolower:%{User-Name}} (4) --> jdoe (4) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (4) if (User-Name =~ / /) (4) if (User-Name =~ / /) -> FALSE (4) if (User-Name =~ /@.*@/ ) (4) if (User-Name =~ /@.*@/ ) -> FALSE (4) if (User-Name =~ /\\.\\./ ) (4) if (User-Name =~ /\\.\\./ ) -> FALSE (4) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (4) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (4) if (User-Name =~ /\\.$/) (4) if (User-Name =~ /\\.$/) -> FALSE (4) if (User-Name =~ /@\\./) (4) if (User-Name =~ /@\\./) -> FALSE (4) } # filter_username filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (4) suffix : No such realm "NULL" (4) [suffix] = noop (4) eap : EAP packet type response id 5 length 6 (4) eap : Continuing tunnel setup. (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap : Expiring EAP session with state 0x0334791e00316016 (4) eap : Finished EAP session with state 0x0334791e00316016 (4) eap : Previous EAP request found for state 0x0334791e00316016, released from the list (4) eap : Peer sent PEAP (25) (4) eap : EAP PEAP (25) (4) eap : Calling eap_peap to process EAP data (4) eap_peap : processing EAP-TLS (4) eap_peap : Received TLS ACK (4) eap_peap : Received TLS ACK (4) eap_peap : ACK handshake fragment handler (4) eap_peap : eaptls_verify returned 1 (4) eap_peap : eaptls_process returned 13 (4) eap_peap : FR_TLS_HANDLED (4) eap : New EAP session, adding 'State' attribute to reply 0x0334791e07326016 (4) [eap] = handled (4) } # authenticate = handled Sending Access-Challenge Id 46 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x0106008d1900aa8bb7908551c17a d9a31659220ff8595190bd8a947d7b18c9d94676e6eebd820d156e0b044c 78e0d025c4c253816f90619756a3e0548e59d097a18bba0ab1ba9c52df0d bb8aa07843a2c0d4f8d5c407e65a9d34999395a1de2e55f5ae132c20c03c ef2c1c44c218e38163a1f2605560a1a14f8840dd5efe42916f165de616030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e073260161c87c4227f6edc6f (4) Finished request Waking up in 0.2 seconds. Received Access-Request Id 47 from 10.2.1.1:58610 to 10.1.1.12:1812 length 351 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0206009019800000008616030100 46100000424104128e21ee934a563f4a9f9358a7db9d439d26d836d2d04f c33aa5c8a359748c0b6371c7e8818995a126449c863bdea984fca5d6fd4a 4f012a248c50d8e2f7c85714030100010116030100307098071b21f1b5cc 63a81f94498b9d431fcaf9127bd8bde265a2e890fad1718444e15d9f8d57 f5625dec5a06e643e52e State = 0x0334791e073260161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0xd1fe9d8bc4de12ad20b7aa81deaff9bf (5) # Executing section authorize from file /etc/raddb/sites-enabled/ default (5) authorize { (5) filter_username filter_username { (5) if (User-Name != "%{tolower:%{User-Name}}") (5) EXPAND %{tolower:%{User-Name}} (5) --> jdoe (5) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (5) if (User-Name =~ / /) (5) if (User-Name =~ / /) -> FALSE (5) if (User-Name =~ /@.*@/ ) (5) if (User-Name =~ /@.*@/ ) -> FALSE (5) if (User-Name =~ /\\.\\./ ) (5) if (User-Name =~ /\\.\\./ ) -> FALSE (5) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (5) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (5) if (User-Name =~ /\\.$/) (5) if (User-Name =~ /\\.$/) -> FALSE (5) if (User-Name =~ /@\\./) (5) if (User-Name =~ /@\\./) -> FALSE (5) } # filter_username filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (5) suffix : No such realm "NULL" (5) [suffix] = noop (5) eap : EAP packet type response id 6 length 144 (5) eap : Continuing tunnel setup. (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap : Expiring EAP session with state 0x0334791e07326016 (5) eap : Finished EAP session with state 0x0334791e07326016 (5) eap : Previous EAP request found for state 0x0334791e07326016, released from the list (5) eap : Peer sent PEAP (25) (5) eap : EAP PEAP (25) (5) eap : Calling eap_peap to process EAP data (5) eap_peap : processing EAP-TLS TLS Length 134 (5) eap_peap : Length Included (5) eap_peap : eaptls_verify returned 11 (5) eap_peap : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_peap : TLS_accept: SSLv3 read client key exchange A (5) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished (5) eap_peap : TLS_accept: SSLv3 read finished A (5) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap : TLS_accept: SSLv3 write change cipher spec A (5) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished (5) eap_peap : TLS_accept: SSLv3 write finished A (5) eap_peap : TLS_accept: SSLv3 flush data SSL: adding session 6fbd6ba3e4a5f3cb6fd2bfafb19a96 703a87a8e0918021bcb2964916706b1160 to cache (5) eap_peap : (other): SSL negotiation finished successfully SSL Connection Established (5) eap_peap : eaptls_process returned 13 (5) eap_peap : FR_TLS_HANDLED (5) eap : New EAP session, adding 'State' attribute to reply 0x0334791e06336016 (5) [eap] = handled (5) } # authenticate = handled Sending Access-Challenge Id 47 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x0107004119001403010001011603 010030eaac4836e7cd06cba4e9ae519990ea081fe1ac588cb58d95d496c7 15b1f8a394b8731877bf16a752c3558a88e243aad2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e063360161c87c4227f6edc6f (5) Finished request Waking up in 0.1 seconds. Received Access-Request Id 48 from 10.2.1.1:58610 to 10.1.1.12:1812 length 213 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020700061900 State = 0x0334791e063360161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0xbb77c7c77c4ee13f26f91886d715e5fe (6) # Executing section authorize from file /etc/raddb/sites-enabled/ default (6) authorize { (6) filter_username filter_username { (6) if (User-Name != "%{tolower:%{User-Name}}") (6) EXPAND %{tolower:%{User-Name}} (6) --> jdoe (6) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (6) if (User-Name =~ / /) (6) if (User-Name =~ / /) -> FALSE (6) if (User-Name =~ /@.*@/ ) (6) if (User-Name =~ /@.*@/ ) -> FALSE (6) if (User-Name =~ /\\.\\./ ) (6) if (User-Name =~ /\\.\\./ ) -> FALSE (6) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (6) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (6) if (User-Name =~ /\\.$/) (6) if (User-Name =~ /\\.$/) -> FALSE (6) if (User-Name =~ /@\\./) (6) if (User-Name =~ /@\\./) -> FALSE (6) } # filter_username filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (6) suffix : No such realm "NULL" (6) [suffix] = noop (6) eap : EAP packet type response id 7 length 6 (6) eap : Continuing tunnel setup. (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap : Expiring EAP session with state 0x0334791e06336016 (6) eap : Finished EAP session with state 0x0334791e06336016 (6) eap : Previous EAP request found for state 0x0334791e06336016, released from the list (6) eap : Peer sent PEAP (25) (6) eap : EAP PEAP (25) (6) eap : Calling eap_peap to process EAP data (6) eap_peap : processing EAP-TLS (6) eap_peap : Received TLS ACK (6) eap_peap : Received TLS ACK (6) eap_peap : ACK handshake is finished (6) eap_peap : eaptls_verify returned 3 (6) eap_peap : eaptls_process returned 3 (6) eap_peap : FR_TLS_SUCCESS (6) eap_peap : Session established. Decoding tunneled attributes. (6) eap_peap : Peap state TUNNEL ESTABLISHED (6) eap : New EAP session, adding 'State' attribute to reply 0x0334791e053c6016 (6) [eap] = handled (6) } # authenticate = handled Sending Access-Challenge Id 48 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x0108002b1900170301002039e41d 51f9c16e29fdbcef54cdc82c10f4de01db061563d4c3fa5a6de01462f1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e053c60161c87c4227f6edc6f (6) Finished request Waking up in 0.1 seconds. Received Access-Request Id 49 from 10.2.1.1:58610 to 10.1.1.12:1812 length 250 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0208002b190017030100206783b4 fad17c7679ac541d9461aca602e778e856217703c4cc8cf10995aa4fec State = 0x0334791e053c60161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0x9fe005ef05f5d7f3533d8a8000d454b4 (7) # Executing section authorize from file /etc/raddb/sites-enabled/ default (7) authorize { (7) filter_username filter_username { (7) if (User-Name != "%{tolower:%{User-Name}}") (7) EXPAND %{tolower:%{User-Name}} (7) --> jdoe (7) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (7) if (User-Name =~ / /) (7) if (User-Name =~ / /) -> FALSE (7) if (User-Name =~ /@.*@/ ) (7) if (User-Name =~ /@.*@/ ) -> FALSE (7) if (User-Name =~ /\\.\\./ ) (7) if (User-Name =~ /\\.\\./ ) -> FALSE (7) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (7) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (7) if (User-Name =~ /\\.$/) (7) if (User-Name =~ /\\.$/) -> FALSE (7) if (User-Name =~ /@\\./) (7) if (User-Name =~ /@\\./) -> FALSE (7) } # filter_username filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (7) suffix : No such realm "NULL" (7) [suffix] = noop (7) eap : EAP packet type response id 8 length 43 (7) eap : Continuing tunnel setup. (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap : Expiring EAP session with state 0x0334791e053c6016 (7) eap : Finished EAP session with state 0x0334791e053c6016 (7) eap : Previous EAP request found for state 0x0334791e053c6016, released from the list (7) eap : Peer sent PEAP (25) (7) eap : EAP PEAP (25) (7) eap : Calling eap_peap to process EAP data (7) eap_peap : processing EAP-TLS (7) eap_peap : eaptls_verify returned 7 (7) eap_peap : Done initial handshake (7) eap_peap : eaptls_process returned 7 (7) eap_peap : FR_TLS_OK (7) eap_peap : Session established. Decoding tunneled attributes. (7) eap_peap : Peap state WAITING FOR INNER IDENTITY (7) eap_peap : Identity - jdoe (7) eap_peap : Got inner identity 'jdoe' (7) eap_peap : Setting default EAP type for tunneled EAP session. (7) eap_peap : Got tunneled request EAP-Message = 0x0208000c016c6965747a6462 server default { (7) eap_peap : Setting User-Name to jdoe Sending tunneled request EAP-Message = 0x0208000c016c6965747a6462 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' server inner-tunnel { (7) # Executing section authorize from file /etc/raddb/sites-enabled/ inner-tunnel (7) authorize { (7) [chap] = noop (7) [mschap] = noop (7) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (7) suffix : No such realm "NULL" (7) [suffix] = noop (7) update control { (7) Proxy-To-Realm := 'LOCAL' (7) } # update control = noop (7) eap : EAP packet type response id 8 length 12 (7) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap : Peer sent Identity (1) (7) eap : Calling eap_mschapv2 to process EAP data (7) eap_mschapv2 : Issuing Challenge (7) eap : New EAP session, adding 'State' attribute to reply 0x990fbb749906a1c7 (7) [eap] = handled (7) } # authenticate = handled } # server inner-tunnel (7) eap_peap : Got tunneled reply code 11 EAP-Message = 0x010900211a0109001c10b115beaf ccb4bfca8a9242a0f8792d666c6965747a6462 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x990fbb749906a1c7eff1e068bea8ce53 (7) eap_peap : Got tunneled reply RADIUS code 11 EAP-Message = 0x010900211a0109001c10b115beaf ccb4bfca8a9242a0f8792d666c6965747a6462 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x990fbb749906a1c7eff1e068bea8ce53 (7) eap_peap : Got tunneled Access-Challenge (7) eap : New EAP session, adding 'State' attribute to reply 0x0334791e043d6016 (7) [eap] = handled (7) } # authenticate = handled Sending Access-Challenge Id 49 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x0109004b1900170301004044fa41 b976202b504808a8f63aed25b78748595d9b224d763721b85cb20c9a2590 4d8953fd75658e93fa60edee84d7a0e7838ad6f4c2285ad72ee07023feb1fe Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e043d60161c87c4227f6edc6f (7) Finished request Waking up in 0.1 seconds. Received Access-Request Id 50 from 10.2.1.1:58610 to 10.1.1.12:1812 length 314 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0209006b190017030100607c23de c1884839a39558cd925bc5a6a482bf8c090aa5ce403ef07d102e6bdbb3a9 befe6e11e425ac0ce2912670e03557224ee5bad147a27b4f7a45c2f05ae0 e4962b21880d6f628e965cf9fbfbecbbe10c77d131aa538b80547aeea80e721f59 State = 0x0334791e043d60161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0x271aa3d6fd0b27c66d9b8e75f7c2b18c (8) # Executing section authorize from file /etc/raddb/sites-enabled/ default (8) authorize { (8) filter_username filter_username { (8) if (User-Name != "%{tolower:%{User-Name}}") (8) EXPAND %{tolower:%{User-Name}} (8) --> jdoe (8) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (8) if (User-Name =~ / /) (8) if (User-Name =~ / /) -> FALSE (8) if (User-Name =~ /@.*@/ ) (8) if (User-Name =~ /@.*@/ ) -> FALSE (8) if (User-Name =~ /\\.\\./ ) (8) if (User-Name =~ /\\.\\./ ) -> FALSE (8) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (8) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (8) if (User-Name =~ /\\.$/) (8) if (User-Name =~ /\\.$/) -> FALSE (8) if (User-Name =~ /@\\./) (8) if (User-Name =~ /@\\./) -> FALSE (8) } # filter_username filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (8) suffix : No such realm "NULL" (8) [suffix] = noop (8) eap : EAP packet type response id 9 length 107 (8) eap : Continuing tunnel setup. (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap : Expiring EAP session with state 0x990fbb749906a1c7 (8) eap : Finished EAP session with state 0x0334791e043d6016 (8) eap : Previous EAP request found for state 0x0334791e043d6016, released from the list (8) eap : Peer sent PEAP (25) (8) eap : EAP PEAP (25) (8) eap : Calling eap_peap to process EAP data (8) eap_peap : processing EAP-TLS (8) eap_peap : eaptls_verify returned 7 (8) eap_peap : Done initial handshake (8) eap_peap : eaptls_process returned 7 (8) eap_peap : FR_TLS_OK (8) eap_peap : Session established. Decoding tunneled attributes. (8) eap_peap : Peap state phase2 (8) eap_peap : EAP type MSCHAPv2 (26) (8) eap_peap : Got tunneled request EAP-Message = 0x020900421a0209003d31d867b8c3 07214474de771d5988390d36000000000000000072cf2bcbcb337259034c 73e9dfb826a7da57635d3d74ae89006c6965747a6462 server default { (8) eap_peap : Setting User-Name to jdoe Sending tunneled request EAP-Message = 0x020900421a0209003d31d867b8c3 07214474de771d5988390d36000000000000000072cf2bcbcb337259034c 73e9dfb826a7da57635d3d74ae89006c6965747a6462 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'jdoe' State = 0x990fbb749906a1c7eff1e068bea8ce53 NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' server inner-tunnel { (8) # Executing section authorize from file /etc/raddb/sites-enabled/ inner-tunnel (8) authorize { (8) [chap] = noop (8) [mschap] = noop (8) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (8) suffix : No such realm "NULL" (8) [suffix] = noop (8) update control { (8) Proxy-To-Realm := 'LOCAL' (8) } # update control = noop (8) eap : EAP packet type response id 9 length 66 (8) eap : No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files : users: Matched entry DEFAULT at line 198 (8) [files] = ok rlm_ldap (ldap): Reserved connection (4) (8) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap : --> (uid=jdoe) (8) ldap : EXPAND o=ORG (8) ldap : --> o=ORG (8) ldap : Performing search in 'o=ORG' with filter '(uid=jdoe)', scope 'sub' (8) ldap : Waiting for search result... (8) ldap : User object found at DN "cn=jdoe,ou=TECH,ou=CE,ou=AD,o=ORG" (8) ldap : Added eDirectory password (8) ldap : Binding as user for eDirectory authorization checks (8) ldap : Waiting for bind result... (8) ldap : Bind successful (8) ldap : Bind as user 'cn=jdoe,ou=TECH,ou=CE,ou=AD,o=ORG' was successful (8) ldap : Processing user attributes (8) ldap : reply:Tunnel-Private-Group-ID := ''522'' rlm_ldap (ldap): Released connection (4) (8) [ldap] = ok (8) [expiration] = noop (8) [logintime] = noop (8) WARNING: pap : Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = EAP (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap : Expiring EAP session with state 0x990fbb749906a1c7 (8) eap : Finished EAP session with state 0x990fbb749906a1c7 (8) eap : Previous EAP request found for state 0x990fbb749906a1c7, released from the list (8) eap : Peer sent MSCHAPv2 (26) (8) eap : EAP MSCHAPv2 (26) (8) eap : Calling eap_mschapv2 to process EAP data (8) eap_mschapv2 : # Executing group from file /etc/raddb/sites-enabled/ inner-tunnel (8) eap_mschapv2 : Auth-Type MS-CHAP { (8) mschap : Found Cleartext-Password, hashing to create LM-Password (8) mschap : Found Cleartext-Password, hashing to create NT-Password (8) mschap : Creating challenge hash with username: jdoe (8) mschap : Client is using MS-CHAPv2 (8) mschap : Adding MS-CHAPv2 MPPE keys (8) [mschap] = ok (8) } # Auth-Type MS-CHAP = ok MSCHAP Success (8) eap : New EAP session, adding 'State' attribute to reply 0x990fbb749805a1c7 (8) [eap] = handled (8) } # authenticate = handled } # server inner-tunnel (8) eap_peap : Got tunneled reply code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := '522' EAP-Message = 0x010a00331a0309002e533d463046 44414446304537333344393338344537343337393239324335344532383732424143343543 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x990fbb749805a1c7eff1e068bea8ce53 (8) eap_peap : Got tunneled reply RADIUS code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := '522' EAP-Message = 0x010a00331a0309002e533d463046 44414446304537333344393338344537343337393239324335344532383732424143343543 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x990fbb749805a1c7eff1e068bea8ce53 (8) eap_peap : Got tunneled Access-Challenge (8) eap : New EAP session, adding 'State' attribute to reply 0x0334791e0b3e6016 (8) [eap] = handled (8) } # authenticate = handled Sending Access-Challenge Id 50 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x010a005b19001703010050d06e22 290e015ea2d39bdaa43bb43975a94e1618e9e174f63ac08e075fca679b7d ef46f957946690d086605106565191e0cf0de416a6f6e5a2b6169844f261 5fc7e8ffc501dd9bad3263e0b9768b8cf2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e0b3e60161c87c4227f6edc6f (8) Finished request Received Access-Request Id 51 from 10.2.1.1:58610 to 10.1.1.12:1812 length 250 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020a002b19001703010020f6ee8a 1b75814144a24aa40157309c1483f4d82aada22d42a549f225dbfca0f5 State = 0x0334791e0b3e60161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0xf5f1a5ea9c716ec5006a8f6c49ef473a (9) # Executing section authorize from file /etc/raddb/sites-enabled/ default (9) authorize { (9) filter_username filter_username { (9) if (User-Name != "%{tolower:%{User-Name}}") (9) EXPAND %{tolower:%{User-Name}} (9) --> jdoe (9) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (9) if (User-Name =~ / /) (9) if (User-Name =~ / /) -> FALSE (9) if (User-Name =~ /@.*@/ ) (9) if (User-Name =~ /@.*@/ ) -> FALSE (9) if (User-Name =~ /\\.\\./ ) (9) if (User-Name =~ /\\.\\./ ) -> FALSE (9) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (9) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (9) if (User-Name =~ /\\.$/) (9) if (User-Name =~ /\\.$/) -> FALSE (9) if (User-Name =~ /@\\./) (9) if (User-Name =~ /@\\./) -> FALSE (9) } # filter_username filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (9) suffix : No such realm "NULL" (9) [suffix] = noop (9) eap : EAP packet type response id 10 length 43 (9) eap : Continuing tunnel setup. (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = EAP (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap : Expiring EAP session with state 0x990fbb749805a1c7 (9) eap : Finished EAP session with state 0x0334791e0b3e6016 (9) eap : Previous EAP request found for state 0x0334791e0b3e6016, released from the list (9) eap : Peer sent PEAP (25) (9) eap : EAP PEAP (25) (9) eap : Calling eap_peap to process EAP data (9) eap_peap : processing EAP-TLS (9) eap_peap : eaptls_verify returned 7 (9) eap_peap : Done initial handshake (9) eap_peap : eaptls_process returned 7 (9) eap_peap : FR_TLS_OK (9) eap_peap : Session established. Decoding tunneled attributes. (9) eap_peap : Peap state phase2 (9) eap_peap : EAP type MSCHAPv2 (26) (9) eap_peap : Got tunneled request EAP-Message = 0x020a00061a03 server default { (9) eap_peap : Setting User-Name to jdoe Sending tunneled request EAP-Message = 0x020a00061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'jdoe' State = 0x990fbb749805a1c7eff1e068bea8ce53 NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' server inner-tunnel { (9) # Executing section authorize from file /etc/raddb/sites-enabled/ inner-tunnel (9) authorize { (9) [chap] = noop (9) [mschap] = noop (9) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (9) suffix : No such realm "NULL" (9) [suffix] = noop (9) update control { (9) Proxy-To-Realm := 'LOCAL' (9) } # update control = noop (9) eap : EAP packet type response id 10 length 6 (9) eap : EAP-MSCHAPV2 success, returning short-circuit ok (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = EAP (9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (9) authenticate { (9) eap : Expiring EAP session with state 0x990fbb749805a1c7 (9) eap : Finished EAP session with state 0x990fbb749805a1c7 (9) eap : Previous EAP request found for state 0x990fbb749805a1c7, released from the list (9) eap : Peer sent MSCHAPv2 (26) (9) eap : EAP MSCHAPv2 (26) (9) eap : Calling eap_mschapv2 to process EAP data (9) eap : Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/raddb/sites-enabled/ inner-tunnel (9) post-auth { (9) ldap : EXPAND . (9) ldap : --> . (9) [ldap] = noop (9) } # post-auth = noop } # server inner-tunnel (9) eap_peap : Got tunneled reply code 2 MS-MPPE-Encryption-Policy = Encryption-Allowed MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed MS-MPPE-Send-Key = 0xa8120a9f46e99a42c6a14240b5647491 MS-MPPE-Recv-Key = 0xb4fc7aa02311ce81ce08bc8ce410332f EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = 'jdoe' (9) eap_peap : Got tunneled reply RADIUS code 2 MS-MPPE-Encryption-Policy = Encryption-Allowed MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed MS-MPPE-Send-Key = 0xa8120a9f46e99a42c6a14240b5647491 MS-MPPE-Recv-Key = 0xb4fc7aa02311ce81ce08bc8ce410332f EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = 'jdoe' (9) eap_peap : Tunneled authentication was successful. (9) eap_peap : SUCCESS (9) eap_peap : Saving tunneled attributes for later (9) eap : New EAP session, adding 'State' attribute to reply 0x0334791e0a3f6016 (9) [eap] = handled (9) } # authenticate = handled Sending Access-Challenge Id 51 from 10.1.1.12:1812 to 10.2.1.1:58610 EAP-Message = 0x010b002b1900170301002086df58 35ec64b246dad52553f351a7c0aa6735f454aceade850a916a208d07de Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0334791e0a3f60161c87c4227f6edc6f (9) Finished request Received Access-Request Id 52 from 10.2.1.1:58610 to 10.1.1.12:1812 length 250 User-Name = 'jdoe' NAS-IP-Address = 10.2.1.1 NAS-Port = 0 NAS-Identifier = '10.2.1.99' NAS-Port-Type = Wireless-802.11 Calling-Station-Id = 'a0cc2b80adbb' Called-Station-Id = 'aca31ec2d29c' Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020b002b190017030100206eeea6 794fb8c7bdc922d34b0f51627305b9fcf003ab4e723483eaae39f4d9a7 State = 0x0334791e0a3f60161c87c4227f6edc6f Aruba-Essid-Name = 'PrivateWifi' Aruba-Location-Id = 'ComEd-APtech' Aruba-AP-Group = 'ComEdAVC' Aruba-Device-Type = 'Linux' Message-Authenticator = 0xc072db008e2c81bd016d226b8c083307 (10) # Executing section authorize from file /etc/raddb/sites-enabled/ default (10) authorize { (10) filter_username filter_username { (10) if (User-Name != "%{tolower:%{User-Name}}") (10) EXPAND %{tolower:%{User-Name}} (10) --> jdoe (10) if (User-Name != "%{tolower:%{User-Name}}") -> FALSE (10) if (User-Name =~ / /) (10) if (User-Name =~ / /) -> FALSE (10) if (User-Name =~ /@.*@/ ) (10) if (User-Name =~ /@.*@/ ) -> FALSE (10) if (User-Name =~ /\\.\\./ ) (10) if (User-Name =~ /\\.\\./ ) -> FALSE (10) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) (10) if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (10) if (User-Name =~ /\\.$/) (10) if (User-Name =~ /\\.$/) -> FALSE (10) if (User-Name =~ /@\\./) (10) if (User-Name =~ /@\\./) -> FALSE (10) } # filter_username filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) suffix : No '@' in User-Name = "jdoe", looking up realm NULL (10) suffix : No such realm "NULL" (10) [suffix] = noop (10) eap : EAP packet type response id 11 length 43 (10) eap : Continuing tunnel setup. (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = EAP (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap : Expiring EAP session with state 0x0334791e0a3f6016 (10) eap : Finished EAP session with state 0x0334791e0a3f6016 (10) eap : Previous EAP request found for state 0x0334791e0a3f6016, released from the list (10) eap : Peer sent PEAP (25) (10) eap : EAP PEAP (25) (10) eap : Calling eap_peap to process EAP data (10) eap_peap : processing EAP-TLS (10) eap_peap : eaptls_verify returned 7 (10) eap_peap : Done initial handshake (10) eap_peap : eaptls_process returned 7 (10) eap_peap : FR_TLS_OK (10) eap_peap : Session established. Decoding tunneled attributes. (10) eap_peap : Peap state send tlv success (10) eap_peap : Received EAP-TLV response. (10) eap_peap : Success (10) eap_peap : Using saved attributes from the original Access-Accept User-Name = 'jdoe' (10) eap_peap : Saving session 6fbd6ba3e4a5f3cb6fd2bfafb19a96 703a87a8e0918021bcb2964916706b1160 vps 0x7fa42d6acd20 in the cache (10) eap : Freeing handler (10) [eap] = ok (10) } # authenticate = ok (10) # Executing section post-auth from file /etc/raddb/sites-enabled/ default (10) post-auth { (10) ldap : EXPAND . (10) ldap : --> . (10) [ldap] = noop (10) [exec] = noop (10) remove_reply_message_if_eap remove_reply_message_if_eap { (10) if (reply:EAP-Message && reply:Reply-Message) (10) if (reply:EAP-Message && reply:Reply-Message) -> FALSE (10) else else { (10) [noop] = noop (10) } # else else = noop (10) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (10) } # post-auth = noop Sending Access-Accept Id 52 from 10.1.1.12:1812 to 10.2.1.1:58610 User-Name = 'jdoe' MS-MPPE-Recv-Key = 0x99b34de497ff17dac4331a85a849 a8680c9a3c695079b19dcf6de08eeab4f5c1 MS-MPPE-Send-Key = 0x9c028a05c41250acf630ee78ec80 65ba3c0471da457ecbe04aa382f39614f2d4 EAP-Message = 0x030b0004 Message-Authenticator = 0x00000000000000000000000000000000 (10) Finished request Waking up in 4.3 seconds. (0) Cleaning up request packet ID 42 with timestamp +23 (1) Cleaning up request packet ID 43 with timestamp +23 (2) Cleaning up request packet ID 44 with timestamp +23 (3) Cleaning up request packet ID 45 with timestamp +23 (4) Cleaning up request packet ID 46 with timestamp +23 (5) Cleaning up request packet ID 47 with timestamp +23 (6) Cleaning up request packet ID 48 with timestamp +23 (7) Cleaning up request packet ID 49 with timestamp +23 (8) Cleaning up request packet ID 50 with timestamp +23 (9) Cleaning up request packet ID 51 with timestamp +23 (10) Cleaning up request packet ID 52 with timestamp +23 Ready to process requests.

-----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+dlietz= inghamisd.org@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Monday, May 14, 2018 4:08 PM To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: passing Tunnel-Private-Group-ID

...

On May 14, 2018, at 3:34 PM, Daniel Lietz <dlietz@inghamisd.org> wrote:

I have an existing freeradius version 1 server running on SLES 11sp1/OES11 that I've been using to authenticate eDirectory users to an Aruba SSID for the last 3 years. I have it configured so that the tunnel-private-group-id for the user gets passed from the freeradius server to the Aruba Instant controller

How? And I don't mean in the Access-Accept.

...

Now, I'm trying to build a refresh version on SLES 12sp1 running freeradius 3. I have authentication working, but when I authenticate against the new server server, the vlan tag is either not getting sent back to the wireless controller or it's not getting read by the controller correctly. There are enough differences between version 1 and 3 that I'm not sure I haven't missed configuring something in the config files, but I'm not sure what or where.

Since you haven't posted the debug output, or even described what you did, we have no idea what's going wrong.

http://wiki.freeradius.org/list-help

Alan DeKok.

- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html

- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html