Thanks, is that why it's not sending the reply attribute in the
Access-Accept packet?

On Thu, May 31, 2018, 13:17 Alan Buxey <alan.buxey@gmail.com> wrote:

> hi,
>
> Mikrotik-Rate-Limit == "1024k/1024k"
>
> you probably want
>
> Mikrotik-Rate-Limit := "1024k/1024k"
>
> alan
>
> On 31 May 2018 at 12:35, Uchenna Nebedum <nebeduch@gmail.com> wrote:
>
> > Good Day all,
> >
> > I'm new to FreeRadius and radius in general.
> > I set up a freeradius3.0 server on my ubuntu18.04 machine
> > I created a few users and and gave them radcheck and radreply attributes
> > but when i test the users with radtest, In the Access-Accept message the
> > reply attributes are not included
> > here's the debug output
> > Thanks a lot for any help at all
> >
> >
> > The Request
> > radtest F0:3D:03:EC:42:66 F0:3D:03:EC:42:66 localhost 1812 testing123
> > Sent Access-Request Id 64 from 0.0.0.0:42592 to 127.0.0.1:1812 length
> 103
> >     User-Name = "F0:3D:03:EC:42:66"
> >     User-Password = "F0:3D:03:EC:42:66"
> >     NAS-IP-Address = 127.0.1.1
> >     NAS-Port = 1812
> >     Message-Authenticator = 0x00
> >     Cleartext-Password = "F0:3D:03:EC:42:66"
> > Received Access-Accept Id 64 from 127.0.0.1:1812 to 0.0.0.0:0 length 20
> >
> >
> > FreeRADIUS Version 3.0.16
> > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE
> > You may redistribute copies of FreeRADIUS under the terms of the
> > GNU General Public License
> > For more information about these matters, see the file named COPYRIGHT
> > Starting - reading configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary
> > including dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/freeradius/3.0/dictionary
> > including configuration file /etc/freeradius/3.0/radiusd.conf
> > including configuration file /etc/freeradius/3.0/proxy.conf
> > including configuration file /etc/freeradius/3.0/clients.conf
> > including files in directory /etc/freeradius/3.0/mods-enabled/
> > including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> > including configuration file /etc/freeradius/3.0/mods-enabled/realm
> > including configuration file /etc/freeradius/3.0/mods-enabled/soh
> > including configuration file /etc/freeradius/3.0/mods-enabled/digest
> > including configuration file /etc/freeradius/3.0/mods-enabled/expr
> > including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> > including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> > including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> > including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> > including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> > including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/echo
> > including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> > including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> > including configuration file /etc/freeradius/3.0/mods-enabled/always
> > including configuration file /etc/freeradius/3.0/mods-enabled/exec
> > including configuration file /etc/freeradius/3.0/mods-enabled/files
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> > including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> > including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> > including configuration file /etc/freeradius/3.0/mods-enabled/chap
> > including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> > including configuration file /etc/freeradius/3.0/mods-enabled/detail
> > including configuration file /etc/freeradius/3.0/mods-enabled/pap
> > including configuration file /etc/freeradius/3.0/mods-enabled/eap
> > including configuration file /etc/freeradius/3.0/mods-enabled/sql
> > including configuration file
> > /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
> > including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/unix
> > including files in directory /etc/freeradius/3.0/policy.d/
> > including configuration file /etc/freeradius/3.0/policy.d/debug
> > including configuration file
> > /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> > including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> > including configuration file
> /etc/freeradius/3.0/policy.d/canonicalization
> > including configuration file /etc/freeradius/3.0/policy.d/filter
> > including configuration file /etc/freeradius/3.0/policy.d/accounting
> > including configuration file /etc/freeradius/3.0/policy.d/operator-name
> > including configuration file /etc/freeradius/3.0/policy.d/dhcp
> > including configuration file /etc/freeradius/3.0/policy.d/control
> > including configuration file /etc/freeradius/3.0/policy.d/cui
> > including configuration file /etc/freeradius/3.0/policy.d/eap
> > including files in directory /etc/freeradius/3.0/sites-enabled/
> > including configuration file /etc/freeradius/3.0/sites-enabled/default
> > including configuration file /etc/freeradius/3.0/sites-
> > enabled/inner-tunnel
> > main {
> >  security {
> >      user = "freerad"
> >      group = "freerad"
> >      allow_core_dumps = no
> >  }
> >     name = "freeradius"
> >     prefix = "/usr"
> >     localstatedir = "/var"
> >     logdir = "/var/log/freeradius"
> >     run_dir = "/var/run/freeradius"
> > }
> > main {
> >     name = "freeradius"
> >     prefix = "/usr"
> >     localstatedir = "/var"
> >     sbindir = "/usr/sbin"
> >     logdir = "/var/log/freeradius"
> >     run_dir = "/var/run/freeradius"
> >     libdir = "/usr/lib/freeradius"
> >     radacctdir = "/var/log/freeradius/radacct"
> >     hostname_lookups = no
> >     max_request_time = 30
> >     cleanup_delay = 5
> >     max_requests = 16384
> >     pidfile = "/var/run/freeradius/freeradius.pid"
> >     checkrad = "/usr/sbin/checkrad"
> >     debug_level = 0
> >     proxy_requests = yes
> >  log {
> >      stripped_names = no
> >      auth = yes
> >      auth_badpass = yes
> >      auth_goodpass = yes
> >      colourise = yes
> >      msg_denied = "You are already logged in - access denied"
> >  }
> >  resources {
> >  }
> >  security {
> >      max_attributes = 200
> >      reject_delay = 1.000000
> >      status_server = yes
> >  }
> > }
> > radiusd: #### Loading Realms and Home Servers ####
> >  proxy server {
> >      retry_delay = 5
> >      retry_count = 3
> >      default_fallback = no
> >      dead_time = 120
> >      wake_all_if_all_dead = no
> >  }
> >  home_server localhost {
> >      ipaddr = 127.0.0.1
> >      port = 1812
> >      type = "auth"
> >      secret = <<< secret >>>
> >      response_window = 20.000000
> >      response_timeouts = 1
> >      max_outstanding = 65536
> >      zombie_period = 40
> >      status_check = "status-server"
> >      ping_interval = 30
> >      check_interval = 30
> >      check_timeout = 4
> >      num_answers_to_alive = 3
> >      revive_interval = 120
> >   limit {
> >       max_connections = 16
> >       max_requests = 0
> >       lifetime = 0
> >       idle_timeout = 0
> >   }
> >   coa {
> >       irt = 2
> >       mrt = 16
> >       mrc = 5
> >       mrd = 30
> >   }
> >  }
> >  home_server_pool my_auth_failover {
> >     type = fail-over
> >     home_server = localhost
> >  }
> >  realm example.com {
> >     auth_pool = my_auth_failover
> >  }
> >  realm LOCAL {
> >  }
> > radiusd: #### Loading Clients ####
> >  client localhost {
> >      ipaddr = 127.0.0.1
> >      require_message_authenticator = no
> >      secret = <<< secret >>>
> >      nas_type = "other"
> >      proto = "*"
> >   limit {
> >       max_connections = 16
> >       lifetime = 0
> >       idle_timeout = 30
> >   }
> >  }
> >  client localhost_ipv6 {
> >      ipv6addr = ::1
> >      require_message_authenticator = no
> >      secret = <<< secret >>>
> >   limit {
> >       max_connections = 16
> >       lifetime = 0
> >       idle_timeout = 30
> >   }
> >  }
> > Debugger not attached
> >  # Creating Auth-Type = mschap
> >  # Creating Auth-Type = digest
> >  # Creating Auth-Type = eap
> >  # Creating Auth-Type = PAP
> >  # Creating Auth-Type = CHAP
> >  # Creating Auth-Type = MS-CHAP
> > radiusd: #### Instantiating modules ####
> >  modules {
> >   # Loaded module rlm_preprocess
> >   # Loading module "preprocess" from file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> >   preprocess {
> >       huntgroups =
> "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> >       hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> >       with_ascend_hack = no
> >       ascend_channels_per_line = 23
> >       with_ntdomain_hack = no
> >       with_specialix_jetstream_hack = no
> >       with_cisco_vsa_hack = no
> >       with_alvarion_vsa_hack = no
> >   }
> >   # Loaded module rlm_realm
> >   # Loading module "IPASS" from file /etc/freeradius/3.0/mods-
> > enabled/realm
> >   realm IPASS {
> >       format = "prefix"
> >       delimiter = "/"
> >       ignore_default = no
> >       ignore_null = no
> >   }
> >   # Loading module "suffix" from file /etc/freeradius/3.0/mods-
> > enabled/realm
> >   realm suffix {
> >       format = "suffix"
> >       delimiter = "@"
> >       ignore_default = no
> >       ignore_null = no
> >   }
> >   # Loading module "realmpercent" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> >   realm realmpercent {
> >       format = "suffix"
> >       delimiter = "%"
> >       ignore_default = no
> >       ignore_null = no
> >   }
> >   # Loading module "ntdomain" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> >   realm ntdomain {
> >       format = "prefix"
> >       delimiter = "\\"
> >       ignore_default = no
> >       ignore_null = no
> >   }
> >   # Loaded module rlm_soh
> >   # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> >   soh {
> >       dhcp = yes
> >   }
> >   # Loaded module rlm_digest
> >   # Loading module "digest" from file
> > /etc/freeradius/3.0/mods-enabled/digest
> >   # Loaded module rlm_expr
> >   # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> >   expr {
> >       safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> >   }
> >   # Loaded module rlm_replicate
> >   # Loading module "replicate" from file
> > /etc/freeradius/3.0/mods-enabled/replicate
> >   # Loaded module rlm_utf8
> >   # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> >   # Loaded module rlm_exec
> >   # Loading module "ntlm_auth" from file
> > /etc/freeradius/3.0/mods-enabled/ntlm_auth
> >   exec ntlm_auth {
> >       wait = yes
> >       program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> > --username=%{mschap:User-Name} --password=%{User-Password}"
> >       shell_escape = yes
> >   }
> >   # Loaded module rlm_linelog
> >   # Loading module "linelog" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> >   linelog {
> >       filename = "/var/log/freeradius/linelog"
> >       escape_filenames = no
> >       syslog_severity = "info"
> >       permissions = 384
> >       format = "This is a log message for %{User-Name}"
> >       reference = "messages.%{%{reply:Packet-Type}:-default}"
> >   }
> >   # Loading module "log_accounting" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> >   linelog log_accounting {
> >       filename = "/var/log/freeradius/linelog-accounting"
> >       escape_filenames = no
> >       syslog_severity = "info"
> >       permissions = 384
> >       format = ""
> >       reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> >   }
> >   # Loaded module rlm_passwd
> >   # Loading module "etc_passwd" from file
> > /etc/freeradius/3.0/mods-enabled/passwd
> >   passwd etc_passwd {
> >       filename = "/etc/passwd"
> >       format = "*User-Name:Crypt-Password:"
> >       delimiter = ":"
> >       ignore_nislike = no
> >       ignore_empty = yes
> >       allow_multiple_keys = no
> >       hash_size = 100
> >   }
> >   # Loaded module rlm_mschap
> >   # Loading module "mschap" from file
> > /etc/freeradius/3.0/mods-enabled/mschap
> >   mschap {
> >       use_mppe = yes
> >       require_encryption = no
> >       require_strong = no
> >       with_ntdomain_hack = yes
> >    passchange {
> >    }
> >       allow_retry = yes
> >       winbind_retry_with_normalised_username = no
> >   }
> >   # Loaded module rlm_radutmp
> >   # Loading module "sradutmp" from file
> > /etc/freeradius/3.0/mods-enabled/sradutmp
> >   radutmp sradutmp {
> >       filename = "/var/log/freeradius/sradutmp"
> >       username = "%{User-Name}"
> >       case_sensitive = yes
> >       check_with_nas = yes
> >       permissions = 420
> >       caller_id = no
> >   }
> >   # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> >   exec echo {
> >       wait = yes
> >       program = "/bin/echo %{User-Name}"
> >       input_pairs = "request"
> >       output_pairs = "reply"
> >       shell_escape = yes
> >   }
> >   # Loaded module rlm_expiration
> >   # Loading module "expiration" from file
> > /etc/freeradius/3.0/mods-enabled/expiration
> >   # Loaded module rlm_attr_filter
> >   # Loading module "attr_filter.post-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> >   attr_filter attr_filter.post-proxy {
> >       filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> >       key = "%{Realm}"
> >       relaxed = no
> >   }
> >   # Loading module "attr_filter.pre-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> >   attr_filter attr_filter.pre-proxy {
> >       filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> >       key = "%{Realm}"
> >       relaxed = no
> >   }
> >   # Loading module "attr_filter.access_reject" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> >   attr_filter attr_filter.access_reject {
> >       filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_
> > reject"
> >       key = "%{User-Name}"
> >       relaxed = no
> >   }
> >   # Loading module "attr_filter.access_challenge" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> >   attr_filter attr_filter.access_challenge {
> >       filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> >       key = "%{User-Name}"
> >       relaxed = no
> >   }
> >   # Loading module "attr_filter.accounting_response" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> >   attr_filter attr_filter.accounting_response {
> >       filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> >       key = "%{User-Name}"
> >       relaxed = no
> >   }
> >   # Loaded module rlm_always
> >   # Loading module "reject" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   always reject {
> >       rcode = "reject"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "fail" from file /etc/freeradius/3.0/mods-
> > enabled/always
> >   always fail {
> >       rcode = "fail"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> >   always ok {
> >       rcode = "ok"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "handled" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   always handled {
> >       rcode = "handled"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "invalid" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   always invalid {
> >       rcode = "invalid"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "userlock" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   always userlock {
> >       rcode = "userlock"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "notfound" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   always notfound {
> >       rcode = "notfound"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "noop" from file /etc/freeradius/3.0/mods-
> > enabled/always
> >   always noop {
> >       rcode = "noop"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "updated" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   always updated {
> >       rcode = "updated"
> >       simulcount = 0
> >       mpp = no
> >   }
> >   # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> >   exec {
> >       wait = no
> >       input_pairs = "request"
> >       shell_escape = yes
> >       timeout = 10
> >   }
> >   # Loaded module rlm_files
> >   # Loading module "files" from file /etc/freeradius/3.0/mods-
> > enabled/files
> >   files {
> >       filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> >       acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> >       preproxy_usersfile = "/etc/freeradius/3.0/mods-
> > config/files/pre-proxy"
> >   }
> >   # Loaded module rlm_dynamic_clients
> >   # Loading module "dynamic_clients" from file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> >   # Loaded module rlm_unpack
> >   # Loading module "unpack" from file
> > /etc/freeradius/3.0/mods-enabled/unpack
> >   # Loaded module rlm_logintime
> >   # Loading module "logintime" from file
> > /etc/freeradius/3.0/mods-enabled/logintime
> >   logintime {
> >       minimum_timeout = 60
> >   }
> >   # Loaded module rlm_cache
> >   # Loading module "cache_eap" from file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> >   cache cache_eap {
> >       driver = "rlm_cache_rbtree"
> >       key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> >       ttl = 15
> >       max_entries = 0
> >       epoch = 0
> >       add_stats = no
> >   }
> >   # Loaded module rlm_chap
> >   # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> >   # Loaded module rlm_detail
> >   # Loading module "auth_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> >   detail auth_log {
> >       filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> >       header = "%t"
> >       permissions = 384
> >       locking = no
> >       escape_filenames = no
> >       log_packet_header = no
> >   }
> >   # Loading module "reply_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> >   detail reply_log {
> >       filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> >       header = "%t"
> >       permissions = 384
> >       locking = no
> >       escape_filenames = no
> >       log_packet_header = no
> >   }
> >   # Loading module "pre_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> >   detail pre_proxy_log {
> >       filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> >       header = "%t"
> >       permissions = 384
> >       locking = no
> >       escape_filenames = no
> >       log_packet_header = no
> >   }
> >   # Loading module "post_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> >   detail post_proxy_log {
> >       filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> >       header = "%t"
> >       permissions = 384
> >       locking = no
> >       escape_filenames = no
> >       log_packet_header = no
> >   }
> >   # Loading module "detail" from file
> > /etc/freeradius/3.0/mods-enabled/detail
> >   detail {
> >       filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> >       header = "%t"
> >       permissions = 384
> >       locking = no
> >       escape_filenames = no
> >       log_packet_header = no
> >   }
> >   # Loaded module rlm_pap
> >   # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> >   pap {
> >       normalise = yes
> >   }
> >   # Loaded module rlm_eap
> >   # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> >   eap {
> >       default_eap_type = "md5"
> >       timer_expire = 60
> >       ignore_unknown_eap_types = no
> >       cisco_accounting_username_bug = no
> >       max_sessions = 16384
> >   }
> >   # Loaded module rlm_sql
> >   # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
> >   sql {
> >       driver = "rlm_sql_mysql"
> >       server = "localhost"
> >       port = 3306
> >       login = "root"
> >       password = <<< secret >>>
> >       radius_db = "radius"
> >       read_groups = yes
> >       read_profiles = yes
> >       read_clients = yes
> >       delete_stale_sessions = yes
> >       sql_user_name = "%{User-Name}"
> >       default_user_profile = ""
> >       client_query = "SELECT id, nasname, shortname, type, secret, server
> > FROM nas"
> >       authorize_check_query = "SELECT id, username, attribute, value, op
> > FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> >       authorize_reply_query = "SELECT id, username, attribute, value, op
> > FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> >       authorize_group_check_query = "SELECT id, groupname, attribute,
> > Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY
> id"
> >       authorize_group_reply_query = "SELECT id, groupname, attribute,
> > value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY
> id"
> >       group_membership_query = "SELECT groupname FROM radusergroup WHERE
> > username = '%{SQL-User-Name}' ORDER BY priority"
> >       simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> > '%{SQL-User-Name}' AND acctstoptime IS NULL"
> >       simul_verify_query = "SELECT radacctid, acctsessionid, username,
> > nasipaddress, nasportid, framedipaddress, callingstationid,
> framedprotocol
> > FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS
> NULL"
> >       safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> >    accounting {
> >        reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> >     type {
> >      accounting-on {
> >          query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> >      }
> >      accounting-off {
> >          query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> >      }
> >      start {
> >          query = "INSERT INTO radacct (acctsessionid,
> > acctuniqueid,        username, realm,            nasipaddress,nasportid,
> > nasporttype,        acctstarttime,        acctupdatetime, acctstoptime,
> >     acctsessiontime,     acctauthentic, connectinfo_start,
> > connectinfo_stop,     acctinputoctets, acctoutputoctets,
> > calledstationid,     callingstationid, acctterminatecause,servicetype,
> >     framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
> > '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> > '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
> '%{NAS-Port-Type}',
> > FROM_UNIXTIME(%{integer:Event-Timestamp}),
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
> '%{Acct-Authentic}',
> > '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
> > '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
> > '%{Framed-IP-Address}')"
> >      }
> >      interim-update {
> >          query = "UPDATE radacct SET acctupdatetime  =
> > (@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    =
> > %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
> > framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> > '%{Acct-Unique-Session-Id}'"
> >      }
> >      stop {
> >          query = "UPDATE radacct SET acctstoptime    =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets    =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> > '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> > AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> >      }
> >     }
> >    }
> >    post-auth {
> >        reference = ".query"
> >        query = "INSERT INTO radpostauth (username, pass, reply, authdate)
> > VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> > '%{reply:Packet-Type}', '%S')"
> >    }
> >   }
> > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> > linked
> > Creating attribute SQL-Group
> >   # Loading module "radutmp" from file
> > /etc/freeradius/3.0/mods-enabled/radutmp
> >   radutmp {
> >       filename = "/var/log/freeradius/radutmp"
> >       username = "%{User-Name}"
> >       case_sensitive = yes
> >       check_with_nas = yes
> >       permissions = 384
> >       caller_id = yes
> >   }
> >   # Loaded module rlm_unix
> >   # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> >   unix {
> >       radwtmp = "/var/log/freeradius/radwtmp"
> >   }
> > Creating attribute Unix-Group
> >   instantiate {
> >   }
> >   # Instantiating module "preprocess" from file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> > reading pairlist file /etc/freeradius/3.0/mods-
> > config/preprocess/huntgroups
> > reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> >   # Instantiating module "IPASS" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> >   # Instantiating module "suffix" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> >   # Instantiating module "realmpercent" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> >   # Instantiating module "ntdomain" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> >   # Instantiating module "linelog" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> >   # Instantiating module "log_accounting" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> >   # Instantiating module "etc_passwd" from file
> > /etc/freeradius/3.0/mods-enabled/passwd
> > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> >   # Instantiating module "mschap" from file
> > /etc/freeradius/3.0/mods-enabled/mschap
> > rlm_mschap (mschap): using internal authentication
> >   # Instantiating module "expiration" from file
> > /etc/freeradius/3.0/mods-enabled/expiration
> >   # Instantiating module "attr_filter.post-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/3.0/mods-
> > config/attr_filter/post-proxy
> >   # Instantiating module "attr_filter.pre-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/3.0/mods-
> > config/attr_filter/pre-proxy
> >   # Instantiating module "attr_filter.access_reject" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay"     found in filter list for realm "DEFAULT".
> > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay-USec"     found in filter list for realm
> > "DEFAULT".
> >   # Instantiating module "attr_filter.access_challenge" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> >   # Instantiating module "attr_filter.accounting_response" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> >   # Instantiating module "reject" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "fail" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "ok" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "handled" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "invalid" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "userlock" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "notfound" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "noop" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "updated" from file
> > /etc/freeradius/3.0/mods-enabled/always
> >   # Instantiating module "files" from file
> > /etc/freeradius/3.0/mods-enabled/files
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> >   # Instantiating module "logintime" from file
> > /etc/freeradius/3.0/mods-enabled/logintime
> >   # Instantiating module "cache_eap" from file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> > rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> > loaded and linked
> >   # Instantiating module "auth_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > detail output
> >   # Instantiating module "reply_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> >   # Instantiating module "pre_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> >   # Instantiating module "post_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> >   # Instantiating module "detail" from file
> > /etc/freeradius/3.0/mods-enabled/detail
> >   # Instantiating module "pap" from file
> > /etc/freeradius/3.0/mods-enabled/pap
> >   # Instantiating module "eap" from file
> > /etc/freeradius/3.0/mods-enabled/eap
> >    # Linked to sub-module rlm_eap_md5
> >    # Linked to sub-module rlm_eap_leap
> >    # Linked to sub-module rlm_eap_gtc
> >    gtc {
> >        challenge = "Password: "
> >        auth_type = "PAP"
> >    }
> >    # Linked to sub-module rlm_eap_tls
> >    tls {
> >        tls = "tls-common"
> >    }
> >    tls-config tls-common {
> >        verify_depth = 0
> >        ca_path = "/etc/freeradius/3.0/certs"
> >        pem_file_type = yes
> >        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> >        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> >        ca_file = "/etc/ssl/certs/ca-certificates.crt"
> >        private_key_password = <<< secret >>>
> >        dh_file = "/etc/freeradius/3.0/certs/dh"
> >        fragment_size = 1024
> >        include_length = yes
> >        auto_chain = yes
> >        check_crl = no
> >        check_all_crl = no
> >        cipher_list = "DEFAULT"
> >        cipher_server_preference = no
> >        ecdh_curve = "prime256v1"
> >        tls_max_version = ""
> >        tls_min_version = "1.0"
> >     cache {
> >         enable = no
> >         lifetime = 24
> >         max_entries = 255
> >     }
> >     verify {
> >         skip_if_ocsp_ok = no
> >     }
> >     ocsp {
> >         enable = no
> >         override_cert_url = yes
> >         url = "http://127.0.0.1/ocsp/"
> >         use_nonce = yes
> >         timeout = 0
> >         softfail = no
> >     }
> >    }
> > tls: Unable to set DH parameters.  DH cipher suites may not work!
> > tls: Fix this by running the OpenSSL command listed in eap.conf
> >    # Linked to sub-module rlm_eap_ttls
> >    ttls {
> >        tls = "tls-common"
> >        default_eap_type = "md5"
> >        copy_request_to_tunnel = no
> >        use_tunneled_reply = no
> >        virtual_server = "inner-tunnel"
> >        include_length = yes
> >        require_client_cert = no
> >    }
> > tls: Using cached TLS configuration from previous invocation
> >    # Linked to sub-module rlm_eap_peap
> >    peap {
> >        tls = "tls-common"
> >        default_eap_type = "mschapv2"
> >        copy_request_to_tunnel = no
> >        use_tunneled_reply = no
> >        proxy_tunneled_request_as_eap = yes
> >        virtual_server = "inner-tunnel"
> >        soh = no
> >        require_client_cert = no
> >    }
> > tls: Using cached TLS configuration from previous invocation
> >    # Linked to sub-module rlm_eap_mschapv2
> >    mschapv2 {
> >        with_ntdomain_hack = no
> >        send_error = no
> >    }
> >   # Instantiating module "sql" from file
> > /etc/freeradius/3.0/mods-enabled/sql
> > rlm_sql_mysql: libmysql version: 5.7.22
> >    mysql {
> >     tls {
> >     }
> >        warnings = "auto"
> >    }
> > rlm_sql (sql): Attempting to connect to database "radius"
> > rlm_sql (sql): Initialising connection pool
> >    pool {
> >        start = 5
> >        min = 3
> >        max = 32
> >        spare = 10
> >        uses = 0
> >        lifetime = 0
> >        cleanup_interval = 30
> >        idle_timeout = 60
> >        retry_delay = 30
> >        spread = no
> >    }
> > rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Processing generate_sql_clients
> > rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
> > shortname, type, secret, server FROM nas
> > rlm_sql (sql): Reserved connection (0)
> > rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
> type,
> > secret, server FROM nas
> > rlm_sql (sql): Adding client 192.168.1.14 (mikrotik2) to global clients
> > list
> > rlm_sql (192.168.1.14): Client "mikrotik2" (sql) added
> > rlm_sql (sql): Adding client 0.0.0.0/0 (mikrotik) to global clients list
> > rlm_sql (0.0.0.0): Client "mikrotik" (sql) added
> > rlm_sql (sql): Released connection (0)
> > Need 5 more connections to reach 10 spares
> > rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> >  } # modules
> > radiusd: #### Loading Virtual Servers ####
> > server { # from file /etc/freeradius/3.0/radiusd.conf
> > } # server
> > server default { # from file /etc/freeradius/3.0/sites-enabled/default
> >  # Loading authenticate {...}
> >  # Loading authorize {...}
> > Ignoring "ldap" (see raddb/mods-available/README.rst)
> >  # Loading preacct {...}
> >  # Loading accounting {...}
> >  # Loading session {...}
> >  # Loading post-proxy {...}
> >  # Loading post-auth {...}
> > } # server default
> > server inner-tunnel { # from file
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel
> >  # Loading authenticate {...}
> >  # Loading authorize {...}
> >  # Loading session {...}
> >  # Loading post-proxy {...}
> >  # Loading post-auth {...}
> >  # Skipping contents of 'if' as it is always 'false' --
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel:331
> > } # server inner-tunnel
> > radiusd: #### Opening IP addresses and Ports ####
> > listen {
> >       type = "auth"
> >       ipaddr = *
> >       port = 0
> >    limit {
> >        max_connections = 16
> >        lifetime = 0
> >        idle_timeout = 30
> >    }
> > }
> > listen {
> >       type = "acct"
> >       ipaddr = *
> >       port = 0
> >    limit {
> >        max_connections = 16
> >        lifetime = 0
> >        idle_timeout = 30
> >    }
> > }
> > listen {
> >       type = "auth"
> >       ipv6addr = ::
> >       port = 0
> >    limit {
> >        max_connections = 16
> >        lifetime = 0
> >        idle_timeout = 30
> >    }
> > }
> > listen {
> >       type = "acct"
> >       ipv6addr = ::
> >       port = 0
> >    limit {
> >        max_connections = 16
> >        lifetime = 0
> >        idle_timeout = 30
> >    }
> > }
> > listen {
> >       type = "auth"
> >       ipaddr = 127.0.0.1
> >       port = 18120
> > }
> > Listening on auth address * port 1812 bound to server default
> > Listening on acct address * port 1813 bound to server default
> > Listening on auth address :: port 1812 bound to server default
> > Listening on acct address :: port 1813 bound to server default
> > Listening on auth address 127.0.0.1 port 18120 bound to server
> inner-tunnel
> > Listening on proxy address * port 54602
> > Listening on proxy address :: port 48431
> > Ready to process requests
> > (0) Received Access-Request Id 64 from 127.0.0.1:42592 to 127.0.0.1:1812
> > length 103
> > (0)   User-Name = "F0:3D:03:EC:42:66"
> > (0)   User-Password = "F0:3D:03:EC:42:66"
> > (0)   NAS-IP-Address = 127.0.1.1
> > (0)   NAS-Port = 1812
> > (0)   Message-Authenticator = 0xf1a8ad6de2109c0ddecb3f456032ab0e
> > (0) # Executing section authorize from file
> > /etc/freeradius/3.0/sites-enabled/default
> > (0)   authorize {
> > (0)     policy filter_username {
> > (0)       if (&User-Name) {
> > (0)       if (&User-Name)  -> TRUE
> > (0)       if (&User-Name)  {
> > (0)         if (&User-Name =~ / /) {
> > (0)         if (&User-Name =~ / /)  -> FALSE
> > (0)         if (&User-Name =~ /@[^@]*@/ ) {
> > (0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> > (0)         if (&User-Name =~ /\.\./ ) {
> > (0)         if (&User-Name =~ /\.\./ )  -> FALSE
> > (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
> > (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>  ->
> > FALSE
> > (0)         if (&User-Name =~ /\.$/)  {
> > (0)         if (&User-Name =~ /\.$/)   -> FALSE
> > (0)         if (&User-Name =~ /@\./)  {
> > (0)         if (&User-Name =~ /@\./)   -> FALSE
> > (0)       } # if (&User-Name)  = notfound
> > (0)     } # policy filter_username = notfound
> > (0)     [preprocess] = ok
> > (0)     [chap] = noop
> > (0)     [mschap] = noop
> > (0)     [digest] = noop
> > (0) suffix: Checking for suffix after "@"
> > (0) suffix: No '@' in User-Name = "F0:3D:03:EC:42:66", looking up realm
> > NULL
> > (0) suffix: No such realm "NULL"
> > (0)     [suffix] = noop
> > (0) eap: No EAP-Message, not doing EAP
> > (0)     [eap] = noop
> > (0)     [files] = noop
> > (0) sql: EXPAND %{User-Name}
> > (0) sql:    --> F0:3D:03:EC:42:66
> > (0) sql: SQL-User-Name set to 'F0:3D:03:EC:42:66'
> > rlm_sql (sql): Reserved connection (1)
> > (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
> > WHERE username = '%{SQL-User-Name}' ORDER BY id
> > (0) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
> > WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: Executing select query: SELECT id, username, attribute, value,
> op
> > FROM radcheck WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: User found in radcheck table
> > (0) sql: Conditional check items matched, merging assignment check items
> > (0) sql:   Cleartext-Password := "F0:3D:03:EC:42:66"
> > (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
> > WHERE username = '%{SQL-User-Name}' ORDER BY id
> > (0) sql:    --> SELECT id, username, attribute, value, op FROM radreply
> > WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: Executing select query: SELECT id, username, attribute, value,
> op
> > FROM radreply WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: User found in radreply table, merging reply items
> > (0) sql:   Mikrotik-Rate-Limit == "1024k/1024k"
> > (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
> > '%{SQL-User-Name}' ORDER BY priority
> > (0) sql:    --> SELECT groupname FROM radusergroup WHERE username =
> > 'F0:3D:03:EC:42:66' ORDER BY priority
> > (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
> > username = 'F0:3D:03:EC:42:66' ORDER BY priority
> > (0) sql: User not found in any groups
> > rlm_sql (sql): Released connection (1)
> > Need 4 more connections to reach 10 spares
> > rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > (0)     [sql] = ok
> > (0)     [expiration] = noop
> > (0)     [logintime] = noop
> > (0)     [pap] = updated
> > (0)   } # authorize = updated
> > (0) Found Auth-Type = PAP
> > (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> > (0)   Auth-Type PAP {
> > (0) pap: Login attempt with password
> > (0) pap: Comparing with "known good" Cleartext-Password
> > (0) pap: User authenticated successfully
> > (0)     [pap] = ok
> > (0)   } # Auth-Type PAP = ok
> > (0) # Executing section post-auth from file
> > /etc/freeradius/3.0/sites-enabled/default
> > (0)   post-auth {
> > (0)     update {
> > (0)       No attributes updated
> > (0)     } # update = noop
> > (0) sql: EXPAND .query
> > (0) sql:    --> .query
> > (0) sql: Using query template 'query'
> > rlm_sql (sql): Reserved connection (2)
> > (0) sql: EXPAND %{User-Name}
> > (0) sql:    --> F0:3D:03:EC:42:66
> > (0) sql: SQL-User-Name set to 'F0:3D:03:EC:42:66'
> > (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
> > VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> > '%{reply:Packet-Type}', '%S')
> > (0) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
> > VALUES ( 'F0:3D:03:EC:42:66', 'F0:3D:03:EC:42:66', 'Access-Accept',
> > '2018-05-31 12:30:46')
> > (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
> > authdate) VALUES ( 'F0:3D:03:EC:42:66', 'F0:3D:03:EC:42:66',
> > 'Access-Accept', '2018-05-31 12:30:46')
> > (0) sql: SQL query returned: success
> > (0) sql: 1 record(s) updated
> > rlm_sql (sql): Released connection (2)
> > (0)     [sql] = ok
> > (0)     [exec] = noop
> > (0)     policy remove_reply_message_if_eap {
> > (0)       if (&reply:EAP-Message && &reply:Reply-Message) {
> > (0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
> > (0)       else {
> > (0)         [noop] = noop
> > (0)       } # else = noop
> > (0)     } # policy remove_reply_message_if_eap = noop
> > (0)   } # post-auth = ok
> > (0) Login OK: [F0:3D:03:EC:42:66/F0:3D:03:EC:42:66] (from client
> localhost
> > port 1812)
> > (0) Sent Access-Accept Id 64 from 127.0.0.1:1812 to 127.0.0.1:42592
> > length 0
> > (0) Finished request
> > Waking up in 4.9 seconds.
> >
> >
> > --
> > Nebedum Uchenna
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/
> > list/users.html
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html

Really sorry about that, I tried what you suggested and it worked Thanks a whole lot. On Thu, May 31, 2018, 20:02 Alan Buxey <alan.buxey@gmail.com> wrote:

hi,

Thanks, is that why it's not sending the reply attribute in the

...

Access-Accept packet?

why are you questioning the advice?

alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html