Am Montag, 18. September 2006 10:59 schrieb Michael Messner:

hey list,

we have switches from enterasys and access points from cisco, now we have configured the parameters like this example in the users file:

DEFAULT LDAP-Group == "CN=xadmins,CN=users,DC=isalab,DC=local" Filter-ID == "Enterasys:version=1:policy=xadmins", Tunnel-Type:1 = 13, Tunnel-Medium-Type:1 = 6, Tunnel-Private-Group-ID:1 = 1, Reply-Message = "Welcome %u", Fall-Through = No

so with this entry the enterasys switch also gets the parameters from the aironet and on the other way the same! is this the right way or is there an other possibility to give the differernt types of NAS different parameters?

thanks mIke

Use huntgroups. -- Dr. Michael Schwartzkopff MultiNET Services GmbH Bretonischer Ring 7 85630 Grasbrunn Tel: (+49 89) 456 911 - 0 Fax: (+49 89) 456 911 - 21 mob: (+49 174) 343 28 75 PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42

On Mon 18 Sep 2006 11:59, Michael Messner wrote:

hey list,

we have switches from enterasys and access points from cisco, now we have configured the parameters like this example in the users file:

DEFAULT LDAP-Group == "CN=xadmins,CN=users,DC=isalab,DC=local" Filter-ID == "Enterasys:version=1:policy=xadmins", Tunnel-Type:1 = 13, Tunnel-Medium-Type:1 = 6, Tunnel-Private-Group-ID:1 = 1, Reply-Message = "Welcome %u", Fall-Through = No

so with this entry the enterasys switch also gets the parameters from the aironet and on the other way the same! is this the right way or is there an other possibility to give the differernt types of NAS different parameters?

Yep. Look at the "huntgroups" file. -- Peter Nixon http://www.peternixon.net/ PGP Key: http://www.peternixon.net/public.asc