RE: dictionary.cablelabs[168]: dict_addvalue: value name too long
Hey Alan, I don't have more than one version of freeradius running. This was my problem. ./configure LDFLAGS=/path/to/openssl/ export LDFLAGS make I needed to set LDFLAGS _before_ ./configure. This works well: LDFLAGS=/path/to/openssl/ export LDFLAGS ./configure make Thanks, Ryan -----Original Message----- From: freeradius-users-bounces+rmelendez=wayport.net@lists.freeradius.org [mailto:freeradius-users-bounces+rmelendez=wayport.net@lists.freeradius. org] On Behalf Of Alan DeKok Sent: Thursday, February 16, 2006 4:24 PM To: FreeRadius users mailing list Subject: Re: dictionary.cablelabs[168]: dict_addvalue: value name too long "Ryan Melendez" <rmelendez@wayport.net> wrote:
I am using 1.1.0. Sorry I left that out.
That message isn't produced when running the stock 1.1.0. What else is going on in your machine? Do you have multiple versions of FreeRADIUS installed? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi all, I have set up wireless network using Cisco Aironet and authenticated using Freeradius through EAP TLS and PEAP. The system works fine with Centrino, Proxim and Dlink wireless card but not with 3Com wireless card. The card keep being authenticated eventhough Freeradius already sent Access-Accept packet. Can anybody help? Thanks.
Try diffrent drivers. I had the same problem with 3com Prism 2.5 ----- Original Message ----- From: "Jefri bin Dahari" <jeff@mimos.my> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Tuesday, February 21, 2006 4:04 AM Subject: 3Com Wireless 11g card
Hi all,
I have set up wireless network using Cisco Aironet and authenticated using Freeradius through EAP TLS and PEAP. The system works fine with Centrino, Proxim and Dlink wireless card but not with 3Com wireless card. The card keep being authenticated eventhough Freeradius already sent Access-Accept packet. Can anybody help?
Thanks. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello debik, I create HotSpot system with MikroTik, FreeRADIUS + MySQL But i have problem : How to disconnect user when reach the usage limit (ex: 50 hours, 50 MBytes)? depends on they prepaid registration, so it will stored at RADIUS (MySQL Database). Everyone can register via web based hmmm.. if it possible, how to give user information when they reach the limit like "Time's Up", etc. Does it using RadKill ? but, actually i don't know how to use it. thanks before.. -- Best regards, Yudi Wijaya -- Best regards, Yudi mailto:yudiw@centrin.net.id
participants (4)
-
debik -
Jefri bin Dahari -
Ryan Melendez -
Yudi Wijaya