Freeradius + TTLS Support Failure
Hello, I am getting up a Freeradius server with ttls support. I have built the Debian package with ttsl support but when I try to test it I get the following output: #freeradius -X Starting - reading configuration files ... [...] Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:32775, id=187, length=56 User-Name = "test" User-Password = "test" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 Segmentation fault # I don't know what is the problem, I have been surfing Internet and I have not found any resources to resolve the failure, Please, could you help me? I look forward to hearing from you soon. Respectfully, Jose Antonio -- José Antonio Olivera Ortega Automóvil Conectado - Telefónica I+D Teléfono: 913340330 Ext. 1000 Email: jaoo62@tid.es --
José Antonio Olivera Ortega wrote:
I am getting up a Freeradius server with ttls support. I have built the Debian package with ttsl support but when I try to test it I get the following output:
Are you sure you built it with TTLS support? The debian package doesn't include it by default.
#freeradius -X Starting - reading configuration files ... ... Segmentation fault
See doc/bugs Alan DeKok.
Hello Alan, Alan DeKok wrote:
José Antonio Olivera Ortega wrote:
I am getting up a Freeradius server with ttls support. I have built the Debian package with ttsl support but when I try to test it I get the following output:
Are you sure you built it with TTLS support? The debian package doesn't include it by default.
Yes I am, I built the freeradius debian package by myself. I followed this HOWTO [1]. I post the output again, in which you can see the ttls support: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/freeradius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/freeradius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "ttls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/freeradius/certs/RADIUS-key.pem" tls: certificate_file = "/etc/freeradius/certs/RADIUS-cert.pem" tls: CA_file = "/etc/freeradius/certs/cacert.pem" tls: private_key_password = "(null)" tls: dh_file = "/etc/freeradius/certs/dh" tls: random_file = "/etc/freeradius/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain Enter PEM pass phrase: rlm_eap: SSL error error:06065064:digital envelope routines:EVP_DecryptFinal_ex:bad decrypt rlm_eap_tls: Error reading private key file rlm_eap: Failed to initialize type tls radiusd.conf[10]: eap: Module instantiation failed. radiusd.conf[1960] Unknown module "eap". radiusd.conf[1907] Failed to parse authenticate section. berglek:/home/jaoo62/apps/freeradius-1.1.7/debian# /usr/sbin/freeradius -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/freeradius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/freeradius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "ttls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/freeradius/certs/RADIUS-key.pem" tls: certificate_file = "/etc/freeradius/certs/RADIUS-cert.pem" tls: CA_file = "/etc/freeradius/certs/cacert.pem" tls: private_key_password = "(null)" tls: dh_file = "/etc/freeradius/certs/dh" tls: random_file = "/etc/freeradius/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain Enter PEM pass phrase: WARNING: rlm_eap_tls: Unable to set DH parameters. DH cipher suites may not work! WARNING: Fix this by running the OpenSSL command listed in eap.conf rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "gtc" ttls: copy_request_to_tunnel = no ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/freeradius/users" files: acctusersfile = "/etc/freeradius/acct_users" files: preproxy_usersfile = "/etc/freeradius/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/freeradius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:32770, id=171, length=63 User-Name = "TestUser" User-Password = "TestUser" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 Segmentation fault
#freeradius -X Starting - reading configuration files ...
...
Segmentation fault
See doc/bugs
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[1] http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-... I don't think that this is a bug, may be I have something wrong in the configuration files or not. Do you have a Debian Freeradius package build by yourself to send me? I look forward to hearing from you soon. Respectfully, Jose Antonio Olivera. -- José Antonio Olivera Ortega Automóvil Conectado - Telefónica I+D Teléfono: 913340330 Ext. 1000 Email: jaoo62@tid.es --
José Antonio Olivera Ortega wrote:
I post the output again, in which you can see the ttls support:
That's nice. Did you follow doc/bugs, as I suggested?
Do you have a Debian Freeradius package build by yourself to send me?
There is no secret repository of patches. What's on the web site is what is available. Alan DeKok.
participants (2)
-
Alan DeKok -
José Antonio Olivera Ortega