RE: Nortel Networks Passport 8600 + Radius AAA
There were bugs in that release. Upgrade to 3.5.10.0 J. -- Jonathan De Graeve Network/System Administrator Imelda vzw Informatica Dienst 015/50.52.98 jonathan.de.graeve@imelda.be --------- Always read the manual for the correct way to do things because the number of incorrect ways to do things is almost infinite --------- ________________________________ Van: freeradius-users-bounces@lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] Namens Inci Gedik Verzonden: dinsdag 20 september 2005 10:53 Aan: freeradius-users@lists.freeradius.org Onderwerp: Nortel Networks Passport 8600 + Radius AAA Hi Everyone, I have the same problem. Could someone send me the correct configuration Radiusd.conf , users, clients.conf or if it is necessary dictionary files? Thanks Inci Gedik ------------------------------------------------------------------------ -- I am in the testing phase using Nortel 8600's (8010 is the chassis), No dictionary needed. I have had no problems. but I am also using 3.5 code. maybe trying the current version of code might help. Just a thought
ettan@online.no 1/15/2004 9:01:32 AM >>> Hi
We have just bought a few Nortel Passport 8010, and I like to use freeradius to authenticate the user that want to log on to configure this switches. I can se the Radius server is sending Access-Accept back to the switch, but I don't get any login prompt, but ask me again about login name. Have someone got this to work or have any hints for me ? I can't find any dictionary for Nortel, do I need that ? users file: jon Auth-Type := local, User-Password == "jon",Huntgroup-Name == "pp8600" Service-Type = Login-User, Fall-Through = NO debuging from radiusd -X: modcall: group authorize returns ok rad_check_password: Found Auth-Type local auth: type Local auth: user supplied User-Password matches local User-Password Sending Access-Accept of id 23 to 10.10.9.51:1051 Service-Type = Login-User Finished request 0 Going to the next request The PP8610 config,Software Release 3.2.3.0 configuration: LAB_550:5/config/radius/server# enable true LAB_550:5/config/radius/server# create 10.10.1.2 secret test LAB_550:5/config/radius/server# set 10.10.1.2 secret test - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ----------------------------------------------------- This message is intended only for certain recipients and may be privileged or confidential. If you have received it in error, please notify sender and delete it without making or retaining a copy. ----------------------------------------------------- <<<<*P*H*L*>>>>
My devices release is 3.7.1.0. _____ From: freeradius-users-bounces@lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] On Behalf Of Jonathan De Graeve Sent: Tuesday, September 20, 2005 12:00 PM To: FreeRadius users mailing list Subject: RE: Nortel Networks Passport 8600 + Radius AAA There were bugs in that release. Upgrade to 3.5.10.0 J. -- Jonathan De Graeve Network/System Administrator Imelda vzw Informatica Dienst 015/50.52.98 jonathan.de.graeve@imelda.be --------- Always read the manual for the correct way to do things because the number of incorrect ways to do things is almost infinite --------- _____ Van: freeradius-users-bounces@lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] Namens Inci Gedik Verzonden: dinsdag 20 september 2005 10:53 Aan: freeradius-users@lists.freeradius.org Onderwerp: Nortel Networks Passport 8600 + Radius AAA Hi Everyone, I have the same problem. Could someone send me the correct configuration Radiusd.conf , users, clients.conf or if it is necessary dictionary files? Thanks Inci Gedik -------------------------------------------------------------------------- I am in the testing phase using Nortel 8600's (8010 is the chassis), No dictionary needed. I have had no problems. but I am also using 3.5 code. maybe trying the current version of code might help. Just a thought
ettan@online.no 1/15/2004 9:01:32 AM >>> Hi
We have just bought a few Nortel Passport 8010, and I like to use freeradius to authenticate the user that want to log on to configure this switches. I can se the Radius server is sending Access-Accept back to the switch, but I don't get any login prompt, but ask me again about login name. Have someone got this to work or have any hints for me ? I can't find any dictionary for Nortel, do I need that ? users file: jon Auth-Type := local, User-Password == "jon",Huntgroup-Name == "pp8600" Service-Type = Login-User, Fall-Through = NO debuging from radiusd -X: modcall: group authorize returns ok rad_check_password: Found Auth-Type local auth: type Local auth: user supplied User-Password matches local User-Password Sending Access-Accept of id 23 to 10.10.9.51:1051 Service-Type = Login-User Finished request 0 Going to the next request The PP8610 config,Software Release 3.2.3.0 configuration: LAB_550:5/config/radius/server# enable true LAB_550:5/config/radius/server# create 10.10.1.2 secret test LAB_550:5/config/radius/server# set 10.10.1.2 secret test - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ----------------------------------------------------- This message is intended only for certain recipients and may be privileged or confidential. If you have received it in error, please notify sender and delete it without making or retaining a copy. ----------------------------------------------------- <<<<*P*H*L*>>>> __________ NOD32 1.1224 (20050920) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
participants (2)
-
Inci Gedik -
Jonathan De Graeve