Re: log file for free radius 1.1.6 eap-tls authentication

30 May 2007

      1. RE: Gigaword support (eugene@snowball.co.za)
   2. Re : Multiple server certificates in EAP-TLS or EAP-TTLS
      (Eshun Benjamin)
   3. Re: log file for free radius 1.1.6 eap-tls authentication
      (anoop_c@sifycorp.com)
   4. problem in autehtication with EAP-MD5 (shantanu choudhary)

Hi
   2
I am getting the following message
in log first it satatrts (radiud -X)

[root@localhost radius]# cat radius.log
Wed May 30 11:24:14 2007 : Info: Using deprecated naslist file.  Support for
this will go away soon.
Wed May 30 11:24:14 2007 : Info: rlm_exec: Wait=yes but no output defined.
Did you mean output=none?
Wed May 30 11:24:14 2007 : Info: rlm_eap_tls: Loading the certificate file
as a chain
Wed May 30 11:24:14 2007 : Info: Ready to process requests.

But if again start the server no logs and nothing other than this is coming
in the log.

 regarding users file in navisradius i uesd to do that in EAP_TLS thats why
i asked.

Regards
Anoop
--
...
Message: 5
Date: Tue, 29 May 2007 09:42:52 +0100
From: <tnt@kalik.co.yu>
Subject: Re: log file for free radius 1.1.6 eap-tls authentication
To: \"FreeRadius users mailing list\"
  <freeradius-users@lists.freeradius.org>
Message-ID: <g9b0RimS.1180428172.8965940.tnt@kalik.co.yu>
Content-Type: text/plain; charset=ISO-8859-2
1. That\'s not how certificates work. You add those that you want to
PREVENT from connecting (for whatever reason) to Certificate Revocation
List (CRL). You suposedly do have control over who are certificates
issued to. If you have no control over CA then you shouldn\'t be using
them.
2. Is anything (reading config files etc.) written to the log when you
restart the server?
Ivan Kalik
Kalik Informatika ISP
Dana 29/5/2007, \"anoop_c@sifycorp.com\" <anoop_c@sifycorp.com> pi?e:
...
Hi
  1 I know its eap-tls and certificate based.
Earlier i was using Navis radius .In that for eap-tls we have to add
certificate name to  a specific user file.
    Like that here also user file is there can i make use of the user
file so that only that user get authenticated,
2 Logs are not happening.In config changes required to get the same?
Regards
Anoop
...
Message: 2
Date: Mon, 28 May 2007 15:07:06 +0100
From: <tnt@kalik.co.yu>
Subject: Re: log file for free radius 1.1.6 eap-tls authentication
To: \"FreeRadius users mailing list\"
  <freeradius-users@lists.freeradius.org>
Message-ID: <a8emGRAP.1180361226.4861000.tnt@kalik.co.yu>
Content-Type: text/plain; charset=ISO-8859-2
This is EAP-TLS. This user has a valid user certificate and is
accepted.
If you don\'t want to go via certificates but use user/password, use
EAP-TTLS with MS-CHAPv2 (or PAP or any other auth protocol).
Ivan Kalik
Kalik Informatika ISP
------------------------------

Message: 4
Date: Wed, 30 May 2007 09:23:21 +0100 (BST)
From: shantanu choudhary <shantanu_843@yahoo.co.in>
Subject: problem in autehtication with EAP-MD5
To: freeradius-users@lists.freeradius.org
Message-ID: <327609.49387.qm@web7602.mail.in.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

hi all,
i am trying to get autheticated by radius server using EAP-MD5 but i always
get FAILURE and i m not able to figure out the problem, can anyone help me
out!!!!!

my client side shows out put like this:-
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=17): 01 00 00 0d 02 00 00 0d 01 74 65 73 74 75 73 65
72
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=26): 01 00 00 16 01 01 00 16 04 10 e5 b2 63 cb 4e 4f
e7 d1 b1 4f 30 95 6c 21 cd a9
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=4 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74
72 6c 5f 31 36 32 37 35 2d 31 00
EAP: EAP entering state METHOD
EAP-MD5: Challenge - hexdump(len=16): e5 b2 63 cb 4e 4f e7 d1 b1 4f 30 95 6c
21 cd a9
EAP-MD5: Generating Challenge Response
EAP-MD5: Response - hexdump(len=16): 4a f8 0b fc 31 7e 27 47 ac 95 4c 77 56
30 bf c6
EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=26): 01 00 00 16 02 01 00 16 04 10 4a f8 0b fc 31 7e
27 47 ac 95 4c 77 56 30 bf c6
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=6):
     53 54 41 54 55 53                                 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=13):
     4c 49 53 54 5f 4e 45 54 57 4f 52 4b 53            LIST_NETWORKS
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=8): 01 00 00 04 04 01 00 04
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state DISCARD
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
EAPOL: startWhen --> 0
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=6):
     53 54 41 54 55 53                                 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=6):
     53 54 41 54 55 53                                 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=6):
     53 54 41 54 55 53                                 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
EAPOL: authWhile --> 0
EAPOL: SUPP_BE entering state TIMEOUT
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=9): 01 00 00 05 01 02 00 05 01
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=2 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74
72 6c 5f 31 36 32 37 35 2d 31 00
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=8):
     74 65 73 74 75 73 65 72                           testuser
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=17): 01 00 00 0d 02 02 00 0d 01 74 65 73 74 75 73 65
72
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=26): 01 00 00 16 01 03 00 16 04 10 62 2a 69 09 f7 63
b3 30 cf 0b bd 05 83 73 4f 4f
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=3 method=4 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74
72 6c 5f 31 36 32 37 35 2d 31 00
EAP: EAP entering state METHOD
EAP-MD5: Challenge - hexdump(len=16): 62 2a 69 09 f7 63 b3 30 cf 0b bd 05 83
73 4f 4f
EAP-MD5: Generating Challenge Response
EAP-MD5: Response - hexdump(len=16): bd c1 d1 e3 be 9e 4c 46 7d d1 c0 a3 72
11 b0 ff
EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=26): 01 00 00 16 02 03 00 16 04 10 bd c1 d1 e3 be 9e
4c 46 7d d1 c0 a3 72 11 b0 ff
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=6):
     53 54 41 54 55 53                                 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=13):
     4c 49 53 54 5f 4e 45 54 57 4f 52 4b 53            LIST_NETWORKS
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
EAPOL: startWhen --> 0
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=8): 01 00 00 04 04 03 00 04
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state DISCARD
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=6):
     53 54 41 54 55 53                                 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=6):
     53 54 41 54 55 53                                 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
RX ctrl_iface - hexdump_ascii(len=4):
     50 49 4e 47                                       PING
CTRL_IFACE monitor detached - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63
74 72 6c 5f 31 36 32 37 35 2d 31 00
EAPOL: authWhile --> 0
EAPOL: SUPP_BE entering state TIMEOUT
...
...
i dont know what is this cannot assign requested address,(i am not
requesting for any address!!!)
my supplicant file is like this:-
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
eapol_version=1
ap_scan=1
fast_reauth=1
network={
ssid="ATH182"
scan_ssid=1
key_mgmt=WPA-EAP
eap=MD5
identity="testuser"
password="whatever"
}
...
...
and correspondingly server side shows message like this:-
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/usr/local/var"
 main: logdir = "/usr/local/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/usr/local/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/usr/local/var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
 pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 tls: rsa_key_exchange = no
 tls: dh_key_exchange = yes
 tls: rsa_key_length = 512
 tls: dh_key_length = 512
 tls: verify_depth = 0
 tls: CA_path = "(null)"
 tls: pem_file_type = yes
 tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
 tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
 tls: CA_file = "/usr/local/etc/raddb/certs/root.pem"
 tls: private_key_password = "whatever"
 tls: dh_file = "/usr/local/etc/raddb/certs/dh"
 tls: random_file = "/usr/local/etc/raddb/certs/random"
 tls: fragment_size = 1024
 tls: include_length = yes
 tls: check_crl = no
 tls: check_cert_cn = "(null)"
 tls: cipher_list = "(null)"
 tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
 preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
 files: usersfile = "/usr/local/etc/raddb/users"
 files: acctusersfile = "/usr/local/etc/raddb/acct_users"
 files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
 detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/usr/local/var/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.183:1079, id=0,
length=177
    Message-Authenticator = 0x48563b978d926b5c042592ec5eae4537
    Service-Type = Framed-User
    User-Name = "testuser"
    Framed-MTU = 1488
    Called-Station-Id = "00-03-7F-09-60-7E:ATH183"
    Calling-Station-Id = "00-03-7F-05-C0-9C"
    NAS-Port-Type = Wireless-802.11
    Connect-Info = "CONNECT 54Mbps 802.11g"
    EAP-Message = 0x0200000d017465737475736572
    NAS-IP-Address = 192.168.2.183
    NAS-Port = 2
    NAS-Port-Id = "STA port # 2"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 0 length 13
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    users: Matched entry DEFAULT at line 153
    users: Matched entry DEFAULT at line 172
    users: Matched entry testuser at line 216
  modcall[authorize]: module "files" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
  modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 0 to 192.168.2.183 port 1079
    Framed-IP-Address = 255.255.255.254
    Framed-MTU = 576
    Service-Type = Framed-User
    EAP-Message = 0x010100160410457803a5fc7f8de5ad1e9065c4fec0b0
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0x0eb6726b77f05929d54be6c45de1f52f
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 465abecc
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.2.183:1079, id=1,
length=204
    Message-Authenticator = 0xfbcd80decacba158727083a6ca513fac
    Service-Type = Framed-User
    User-Name = "testuser"
    Framed-MTU = 1488
    State = 0x0eb6726b77f05929d54be6c45de1f52f
    Called-Station-Id = "00-03-7F-09-60-7E:ATH183"
    Calling-Station-Id = "00-03-7F-05-C0-9C"
    NAS-Port-Type = Wireless-802.11
    Connect-Info = "CONNECT 54Mbps 802.11g"
    EAP-Message = 0x020100160410b6cac9199b585c8705d9230d18b93094
    NAS-IP-Address = 192.168.2.183
    NAS-Port = 2
    NAS-Port-Id = "STA port # 2"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  modcall[authorize]: module "chap" returns noop for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
  rlm_eap: EAP packet type response id 1 length 22
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
    users: Matched entry DEFAULT at line 153
    users: Matched entry DEFAULT at line 172
    users: Matched entry testuser at line 216
  modcall[authorize]: module "files" returns ok for request 1
rlm_pap: Found existing Auth-Type, not changing it.
  modcall[authorize]: module "pap" returns noop for request 1
modcall: leaving group authorize (returns updated) for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/md5
  rlm_eap: processing type md5
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns ok for request 1
modcall: leaving group authenticate (returns ok) for request 1
Sending Access-Accept of id 1 to 192.168.2.183 port 1079
    Framed-IP-Address = 255.255.255.254
    Framed-MTU = 576
    Service-Type = Framed-User
    EAP-Message = 0x03010004
    Message-Authenticator = 0x00000000000000000000000000000000
    User-Name = "testuser"
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 1 with timestamp 465abee0
Nothing to do.  Sleeping until we see a request.
can any one help me out it is really important and urgent.
if u need i will also tell u my radius.conf, eap.conf and users file!!
thank you
regards
shantanu
---------------------------------
 Download prohibited? No problem! CHAT from any browser, without download.

Anoop

tags

participants (1)