Hello I'm trying to set up FreeRADIUS with rlm_perl module to have ability to interoperate with our billing/provisioning system. FreeRADIUS version: # radiusd -v radiusd: FreeRADIUS Version 1.1.7, for host amd64-portbld-freebsd6.3, built on Jan 15 2009 at 18:36:52 Perl version: # perl -V Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=freebsd, osvers=6.3-rc2, archname=amd64-freebsd We are using Juniper ERX-310 BRAS to terminate our customers and to configure policies and so on, he need few attributes to be tagged. Here is what normal session should be like to: [never@nemo ~]$ radtest admin test 127.0.0.1 2 testing123 Sending Access-Request of id 229 to 127.0.0.1 port 1812 User-Name = "admin" User-Password = "test" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=229, length=126 ERX-Qos-Profile-Name = "SP_Tele_Internet" ERX-Qos-Parameters = "internet_tr_value 2097152" Framed-IP-Address = 10.0.112.2 Framed-IP-Netmask = 255.255.255.255 ERX-Service-Statistics:1 = time-volume ERX-Service-Activate:1 = "telesys(1048576)" Please note ERX-Service-Statistics:1 and ERX-Service-Activate:1 attributes. I have minimized code in Perl module to achieve this, to exclude any possibility of our system influence: sub authorize { if (($RAD_REQUEST{'User-Name'} eq 'admin') and ($RAD_REQUEST{'User-Password'} eq 'test')) { $RAD_REPLY{'ERX-Service-Activate:1'} = 'telesys(1048576)'; $RAD_REPLY{'ERX-Service-Statistics:1'} = 'time-volume'; $RAD_REPLY{'ERX-Qos-Parameters'} = "internet_tr_value 2097152"; $RAD_REPLY{'ERX-Qos-Profile-Name'} = "SP_Tele_Internet"; $RAD_REPLY{'Framed-IP-Address'} = '10.0.112.2'; $RAD_REPLY{'Framed-IP-Netmask'}= "255.255.255.255"; return RLM_MODULE_OK; }; } Now let me to describe what happens. When I restart radiusd and issue 1st radius Access-Request packet, it returns attributes as expected. But the next one returns this: $ radtest admin test 127.0.0.1 2 testing123 Sending Access-Request of id 32 to 127.0.0.1 port 1812 User-Name = "admin" User-Password = "test" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=32, length=125 ERX-Qos-Profile-Name = "SP_Tele_Internet" ERX-Qos-Parameters = "internet_tr_value 2097152" Framed-IP-Address = 10.0.112.2 Framed-IP-Netmask = 255.255.255.255 ERX-Service-Statistics:0 = time-volume ERX-Service-Activate:0 = "telesys(1048576)" Please note ":0" after 2 last ERX-* attributes, which is a) incorrect, b) in perl code it is clearly written as ":1". Please help me to resolve this issue. Thanks in advance. Here is log of correct behavior: ------------------------------------ rad_recv: Access-Request packet from host 127.0.0.1:64032, id=42, length=57 User-Name = "admin" User-Password = "test" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "admin", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 0 Using perl at 0x592370 rlm_perl: $VAR1 = {}; rlm_perl: defined rlm_perl: Added pair ERX-Qos-Parameters = internet_tr_value 2097152 rlm_perl: Added pair ERX-Service-Activate = telesys (1048576) rlm_perl: Added pair ERX-Qos-Profile-Name = SP_Tele_Internet rlm_perl: Added pair ERX-Service-Statistics = time-volume rlm_perl: Added pair Framed-IP-Address = 10.0.112.2 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.255 rlm_perl: Added pair Auth-Type = Perl modcall[authorize]: module "perl" returns ok for request 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type Perl auth: type "Perl" Processing the authenticate section of radiusd.conf modcall: entering group Perl for request 0 Using perl at 0x592370 rlm_perl: Added pair ERX-Qos-Profile-Name = SP_Tele_Internet rlm_perl: Added pair ERX-Qos-Parameters = internet_tr_value 2097152 rlm_perl: Added pair Framed-IP-Address = 10.0.112.2 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.255 rlm_perl: Added pair Auth-Type = Perl modcall[authenticate]: module "perl" returns ok for request 0 modcall: leaving group Perl (returns ok) for request 0 Sending Access-Accept of id 42 to 127.0.0.1 port 64032 ERX-Qos-Parameters = "internet_tr_value 2097152" ERX-Service-Activate:1 = "telesys (1048576)" ERX-Qos-Profile-Name = "SP_Tele_Internet" ERX-Service-Statistics:1 = time-volume Framed-IP-Address = 10.0.112.2 Framed-IP-Netmask = 255.255.255.255 Finished request 0 -------------------------------------------- Here is log of next try: -------------------------------------------- rad_recv: Access-Request packet from host 127.0.0.1:49908, id=68, length=57 User-Name = "admin" User-Password = "test" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "admin", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 1 Using perl at 0x592370 rlm_perl: $VAR1 = {}; rlm_perl: defined rlm_perl: Added pair ERX-Qos-Parameters = internet_tr_value 2097152 rlm_perl: Added pair ERX-Service-Activate = telesys (1048576) rlm_perl: Added pair ERX-Qos-Profile-Name = SP_Tele_Internet rlm_perl: Added pair ERX-Service-Statistics = time-volume rlm_perl: ERROR: Failed to create pair Primary-DNS = 77.91.190.21 rlm_perl: Added pair Framed-IP-Address = 10.0.112.2 rlm_perl: ERROR: Failed to create pair Secondary-DNS = 77.91.190.24 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.255 rlm_perl: Added pair Auth-Type = Perl modcall[authorize]: module "perl" returns ok for request 1 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 1 modcall: leaving group authorize (returns ok) for request 1 rad_check_password: Found Auth-Type Perl auth: type "Perl" Processing the authenticate section of radiusd.conf modcall: entering group Perl for request 1 Using perl at 0x592370 rlm_perl: Added pair ERX-Qos-Profile-Name = SP_Tele_Internet rlm_perl: Added pair ERX-Qos-Parameters = internet_tr_value 2097152 rlm_perl: Added pair Framed-IP-Address = 10.0.112.2 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.255 rlm_perl: Added pair Auth-Type = Perl modcall[authenticate]: module "perl" returns ok for request 1 modcall: leaving group Perl (returns ok) for request 1 Sending Access-Accept of id 68 to 127.0.0.1 port 49908 ERX-Qos-Parameters = "internet_tr_value 2097152" ERX-Service-Activate:0 = "telesys (1048576)" ERX-Qos-Profile-Name = "SP_Tele_Internet" ERX-Service-Statistics:0 = time-volume Framed-IP-Address = 10.0.112.2 Framed-IP-Netmask = 255.255.255.255 Finished request 1 -- Alexandr Kovalenko http://uafug.org.ua/