EAP-TLS, untrusted certificate in client chain

4 Aug 2024

      Hello,

I'm testing EAP-TLS for WPA3 Enterprise Wi-Fi authentication, and I'm
having trouble getting FreeRADIUS to trust the intermediate
certificate in the client chain. Hopefully someone on this mailing
list can point me in the right direction to get it working. I'd like
to eventually set "reject_unknown_intermediate_ca = yes", but can't
until I get FreeRADIUS to trust the legitimate intermediate
certificate.

Running FreeRADIUS in debug mode (freeradius -X), the relevant error
messages are these (full debug output at the end of this e-mail):
Certificate chain - 1 intermediate CA cert(s) untrusted
To forbid these certificates see 'reject_unknown_intermediate_ca'
(TLS) untrusted certificate with depth [1] subject name
/CN=Intune-Test-CA-Intermediate
(TLS) untrusted certificate with depth [0] subject name
/CN=bb1dc43c-a3fd-4f52-aa81-75efd0924933

The full certificate chain for the client certificate looks like this:
Intune-Test-CA-Root --> Intune-Test-CA-Intermediate --> Client
certificate (with CN= bb1dc43c-a3fd-4f52-aa81-75efd0924933)

FreeRADIUS is version 3.2.5, running on Ubuntu 24.04. I installed
FreeRADIUS using the NetworkRADIUS PPA for Ubuntu 24.04.

The FreeRADIUS configuration is very close to the default
configuration from the NetworkRADIUS PPA packages. I have only made
changes to /etc/freeradius/clients.conf and
/etc/freeradius/mods-available/eap, and I have tried to only make the
bare minimum of changes needed to get EAP-TLS working.

/etc/freeradius/clients.conf:
I added my wireless controller as a client (homelab-wlc in the
configuration file).

/etc/freeradius/mods-available/eap
I changed the default EAP method to TLS, replaced the server
certificate and key with new ones that I copied into the directory
/etc/freeradius/server-certs, commented out ca_file and set ca_path to
 /etc/freeradius-ca-certs.

The /etc/freeradius-ca-certs directory contains Test-CA-Intermediate
and Test-CA-Root in PEM format. After placing the certificates in the
directory, I rehashed them using the command " c_rehash
/etc/freeradius-ca-certs".

root@testradius:~# ls -hal /etc/freeradius-ca-certs/
total 16K
drwxr-xr-x   2 root root 4.0K Aug  4 20:13 .
drwxr-xr-x 113 root root 4.0K Aug  4 20:05 ..
lrwxrwxrwx   1 root root   28 Aug  4 20:13 0a42c71a.0 ->
Intune-Test-CA-Root.cert.pem
lrwxrwxrwx   1 root root   36 Aug  4 20:13 6bf2f1f2.0 ->
Intune-Test-CA-Intermediate.cert.pem
lrwxrwxrwx   1 root root   28 Aug  4 20:13 9ddf9d2a.0 ->
Intune-Test-CA-Root.cert.pem
lrwxrwxrwx   1 root root   36 Aug  4 20:13 e1989cca.0 ->
Intune-Test-CA-Intermediate.cert.pem
-rw-r--r--   1 root root 2.7K Aug  4 20:12 Intune-Test-CA-Intermediate.cert.pem
-rw-r--r--   1 root root 1.9K Aug  4 20:12 Intune-Test-CA-Root.cert.pem

I can validate the client certificate (copied to
/bb1dc43c-a3fd-4f52-aa81-75efd0924933.pem) with OpenSSL using
/etc/freeradius-ca-certs as the CApath, so the certificates and the
rehashing appear to be OK.

root@testradius:~# openssl version
OpenSSL 3.0.13 30 Jan 2024 (Library: OpenSSL 3.0.13 30 Jan 2024)
root@testradius:~# /usr/bin/openssl verify -CApath
/etc/freeradius-ca-certs /bb1dc43c-a3fd-4f52-aa81-75efd0924933.pem
/bb1dc43c-a3fd-4f52-aa81-75efd0924933.pem: OK
root@testradius:~# /usr/bin/openssl verify -CApath
/etc/freeradius-ca-certs -crl_download -crl_check
/bb1dc43c-a3fd-4f52-aa81-75efd0924933.pem
/bb1dc43c-a3fd-4f52-aa81-75efd0924933.pem: OK

While the client chain and certificate that I'm showing here are from
Microsoft's Cloud PKI service, I got the exact same results when I
manually created a root CA, intermediate CA and client certificate
with OpenSSL.

Other things I have tried:
-- Setting "auto_chain = no" in the tls-common section of
/etc/freeradius/mods-available/eap. This made no difference.
-- Using ca_file instead of ca_path, with Intune-Test-CA-Root and
Intune-Test-CA-Intermediate concatenated into one file. This made no
difference.
-- Using strace to see if FreeRADIUS read any files from
/etc/freeradius-ca-certs. It does appear to read
/etc/freeradius-ca-certs/e1989cca.0 (successfully) and then
/etc/freeradius-ca-certs/e1989cca.1 (unsuccessfully, as it does not
exist), but I can't see that that it ever tries to read the root
certificate.

Full output from freeradius -X:

FreeRADIUS Version 3.2.5
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/totp
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/pap
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/rfc7542
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/control
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
 security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
 }
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
proxy_dedup_window = 1
cleanup_delay = 5
max_requests = 16384
max_fds = 512
postauth_client_lost = no
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
  require_message_authenticator = "auto"
  limit_proxy_state = "auto"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  nonblock = no
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client homelab-wlc {
  ipaddr = 172.19.4.1
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
  default_eap_type = "tls"
  timer_expire = 60
  max_eap_type = 52
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  dedup_key = ""
  }
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
  filename = "/etc/freeradius/mods-config/attr_filter/coa"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/freeradius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  dates_as_integer = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
  hints = "/etc/freeradius/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
  filename = "/etc/freeradius/mods-config/files/authorize"
  acctusersfile = "/etc/freeradius/mods-config/files/accounting"
  preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  dates_as_integer = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  dates_as_integer = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  dates_as_integer = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  dates_as_integer = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /etc/freeradius/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  utc = no
  }
  # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
  date wispr2date {
  format = "%Y-%m-%dT%H:%M:%S"
  utc = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/freeradius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
  realm bangpath {
  format = "prefix"
  delimiter = "!"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
  radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_totp
  # Loading module "totp" from file /etc/freeradius/mods-enabled/totp
  totp {
  time_step = 30
  otp_length = 6
  lookback_steps = 1
  lookback_interval = 30
  lookforward_steps = 0
  }
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/freeradius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
  normalise = yes
  }
  instantiate {
  }
  # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius-ca-certs"
    pem_file_type = yes
    private_key_file = "/etc/freeradius/server-certs/privkey.pem"
    certificate_file = "/etc/freeradius/server-certs/fullchain.pem"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    ca_path_reload_interval = 0
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    reject_unknown_intermediate_ca = no
    ecdh_curve = ""
    tls_max_version = "1.2"
    tls_min_version = "1.2"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
  # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 53555
Listening on proxy address :: port 47514
Ready to process requests
(0) Received Access-Request Id 23 from 172.19.4.1:19061 to
172.19.4.25:1812 length 365
(0)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(0)   NAS-IP-Address = 172.19.4.1
(0)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(0)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   NAS-Port = 1
(0)   Fortinet-SSID = "Test-SSID"
(0)   Fortinet-AP-Name = "FortiAP-231G"
(0)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(0)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(0)   Acct-Session-Id = "665F7372000010D6"
(0)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027077
(0)   WLAN-Group-Mgmt-Cipher = 1027078
(0)   Framed-MTU = 1400
(0)   EAP-Message =
0x02c8002e01686f73742f62623164633433632d613366642d346635322d616138312d373565666430393234393333
(0)   Message-Authenticator = 0x9969eefd4b927c5242056739d04bc561
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 200 length 46
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: (TLS) TLS -Initiating new session
(0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client
(0) eap: Sending EAP Request (code 1) ID 201 length 10
(0) eap: EAP session adding &reply:State = 0x43d8de594311d3a3
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 994
(0) Sent Access-Challenge Id 23 from 172.19.4.25:1812 to
172.19.4.1:19061 length 68
(0)   EAP-Message = 0x01c9000a0da000000000
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x43d8de594311d3a3db92dc32dd4b50d3
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 24 from 172.19.4.1:19061 to
172.19.4.25:1812 length 600
(1)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(1)   NAS-IP-Address = 172.19.4.1
(1)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(1)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   NAS-Port = 1
(1)   Fortinet-SSID = "Test-SSID"
(1)   Fortinet-AP-Name = "FortiAP-231G"
(1)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(1)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(1)   Acct-Session-Id = "665F7372000010D6"
(1)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027077
(1)   WLAN-Group-Mgmt-Cipher = 1027078
(1)   Framed-MTU = 1400
(1)   EAP-Message =
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
(1)   State = 0x43d8de594311d3a3db92dc32dd4b50d3
(1)   Message-Authenticator = 0xff1b0631b0180dd439d9b10c9fafce7d
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 994
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 201 length 261
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Removing EAP session with state 0x43d8de594311d3a3
(1) eap: Previous EAP request found for state 0x43d8de594311d3a3,
released from the list
(1) eap: Peer sent packet with method EAP TLS (13)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: (TLS) EAP Peer says that the final record size will be 251 bytes
(1) eap_tls: (TLS) EAP Got all data (251 bytes)
(1) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client hello
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server hello
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Certificate
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write certificate
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write key exchange
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, CertificateRequest
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server done
(1) eap_tls: (TLS) TLS - Server : Need to read more data: SSLv3/TLS
write server done
(1) eap_tls: (TLS) TLS - In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 202 length 1000
(1) eap: EAP session adding &reply:State = 0x43d8de594212d3a3
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 994
(1)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(1) Sent Access-Challenge Id 24 from 172.19.4.25:1812 to
172.19.4.1:19061 length 1064
(1)   EAP-Message =
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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x43d8de594212d3a3db92dc32dd4b50d3
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 25 from 172.19.4.1:19061 to
172.19.4.25:1812 length 343
(2)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(2)   NAS-IP-Address = 172.19.4.1
(2)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(2)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   NAS-Port = 1
(2)   Fortinet-SSID = "Test-SSID"
(2)   Fortinet-AP-Name = "FortiAP-231G"
(2)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(2)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(2)   Acct-Session-Id = "665F7372000010D6"
(2)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027077
(2)   WLAN-Group-Mgmt-Cipher = 1027078
(2)   Framed-MTU = 1400
(2)   EAP-Message = 0x02ca00060d00
(2)   State = 0x43d8de594212d3a3db92dc32dd4b50d3
(2)   Message-Authenticator = 0x0d980ebddd60d53411a5ef4da589002f
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 994
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerKeyExchange"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, CertificateRequest"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHelloDone"
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 202 length 6
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)     [eap] = updated
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     [pap] = noop
(2)   } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Removing EAP session with state 0x43d8de594212d3a3
(2) eap: Previous EAP request found for state 0x43d8de594212d3a3,
released from the list
(2) eap: Peer sent packet with method EAP TLS (13)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 203 length 1000
(2) eap: EAP session adding &reply:State = 0x43d8de594113d3a3
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 994
(2)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(2) Sent Access-Challenge Id 25 from 172.19.4.25:1812 to
172.19.4.1:19061 length 1064
(2)   EAP-Message =
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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x43d8de594113d3a3db92dc32dd4b50d3
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 26 from 172.19.4.1:19061 to
172.19.4.25:1812 length 343
(3)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(3)   NAS-IP-Address = 172.19.4.1
(3)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(3)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   NAS-Port = 1
(3)   Fortinet-SSID = "Test-SSID"
(3)   Fortinet-AP-Name = "FortiAP-231G"
(3)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(3)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(3)   Acct-Session-Id = "665F7372000010D6"
(3)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027077
(3)   WLAN-Group-Mgmt-Cipher = 1027078
(3)   Framed-MTU = 1400
(3)   EAP-Message = 0x02cb00060d00
(3)   State = 0x43d8de594113d3a3db92dc32dd4b50d3
(3)   Message-Authenticator = 0x8797122c439101ab885ae12fc81b2fb4
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 994
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, CertificateRequest"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 203 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Removing EAP session with state 0x43d8de594113d3a3
(3) eap: Previous EAP request found for state 0x43d8de594113d3a3,
released from the list
(3) eap: Peer sent packet with method EAP TLS (13)
(3) eap: Calling submodule eap_tls to process data
(3) eap_tls: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 204 length 319
(3) eap: EAP session adding &reply:State = 0x43d8de594014d3a3
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 994
(3)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(3) Sent Access-Challenge Id 26 from 172.19.4.25:1812 to
172.19.4.1:19061 length 379
(3)   EAP-Message =
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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x43d8de594014d3a3db92dc32dd4b50d3
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 27 from 172.19.4.1:19061 to
172.19.4.25:1812 length 1839
(4)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(4)   NAS-IP-Address = 172.19.4.1
(4)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(4)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   NAS-Port = 1
(4)   Fortinet-SSID = "Test-SSID"
(4)   Fortinet-AP-Name = "FortiAP-231G"
(4)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(4)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(4)   Acct-Session-Id = "665F7372000010D6"
(4)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(4)   WLAN-Pairwise-Cipher = 1027076
(4)   WLAN-Group-Cipher = 1027076
(4)   WLAN-AKM-Suite = 1027077
(4)   WLAN-Group-Mgmt-Cipher = 1027078
(4)   Framed-MTU = 1400
(4)   EAP-Message =
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
(4)   State = 0x43d8de594014d3a3db92dc32dd4b50d3
(4)   Message-Authenticator = 0x516c74e679c9f5d068b520a730504de6
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 994
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, CertificateRequest"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHelloDone"
(4) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 204 length 1492
(4) eap: No EAP Start, assuming it's an on-going EAP conversation
(4)     [eap] = updated
(4)     [files] = noop
(4)     [expiration] = noop
(4)     [logintime] = noop
(4)     [pap] = noop
(4)   } # authorize = updated
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Removing EAP session with state 0x43d8de594014d3a3
(4) eap: Previous EAP request found for state 0x43d8de594014d3a3,
released from the list
(4) eap: Peer sent packet with method EAP TLS (13)
(4) eap: Calling submodule eap_tls to process data
(4) eap_tls: (TLS) EAP Peer says that the final record size will be 4302 bytes
(4) eap_tls: (TLS) EAP Expecting 3 fragments
(4) eap_tls: (TLS) EAP Got first TLS fragment (1482 bytes).  Peer says
more fragments will follow
(4) eap_tls: (TLS) EAP ACKing fragment, the peer should send more data.
(4) eap: Sending EAP Request (code 1) ID 205 length 6
(4) eap: EAP session adding &reply:State = 0x43d8de594715d3a3
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 994
(4)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(4) Sent Access-Challenge Id 27 from 172.19.4.25:1812 to
172.19.4.1:19061 length 64
(4)   EAP-Message = 0x01cd00060d00
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x43d8de594715d3a3db92dc32dd4b50d3
(4) Finished request
Waking up in 4.7 seconds.
(5) Received Access-Request Id 28 from 172.19.4.1:19061 to
172.19.4.25:1812 length 1839
(5)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(5)   NAS-IP-Address = 172.19.4.1
(5)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(5)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   NAS-Port = 1
(5)   Fortinet-SSID = "Test-SSID"
(5)   Fortinet-AP-Name = "FortiAP-231G"
(5)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(5)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(5)   Acct-Session-Id = "665F7372000010D6"
(5)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(5)   WLAN-Pairwise-Cipher = 1027076
(5)   WLAN-Group-Cipher = 1027076
(5)   WLAN-AKM-Suite = 1027077
(5)   WLAN-Group-Mgmt-Cipher = 1027078
(5)   Framed-MTU = 1400
(5)   EAP-Message =
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
(5)   State = 0x43d8de594715d3a3db92dc32dd4b50d3
(5)   Message-Authenticator = 0xa650f7cf121ecc0a8fa9d10a0152467a
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 994
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, CertificateRequest"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHelloDone"
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 205 length 1492
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Removing EAP session with state 0x43d8de594715d3a3
(5) eap: Previous EAP request found for state 0x43d8de594715d3a3,
released from the list
(5) eap: Peer sent packet with method EAP TLS (13)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: (TLS) EAP Got additional fragment (1486 bytes).  Peer
says more fragments will follow
(5) eap_tls: (TLS) EAP ACKing fragment, the peer should send more data.
(5) eap: Sending EAP Request (code 1) ID 206 length 6
(5) eap: EAP session adding &reply:State = 0x43d8de594616d3a3
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 994
(5)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(5) Sent Access-Challenge Id 28 from 172.19.4.25:1812 to
172.19.4.1:19061 length 64
(5)   EAP-Message = 0x01ce00060d00
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x43d8de594616d3a3db92dc32dd4b50d3
(5) Finished request
Waking up in 4.7 seconds.
(6) Received Access-Request Id 29 from 172.19.4.1:19061 to
172.19.4.25:1812 length 1687
(6)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(6)   NAS-IP-Address = 172.19.4.1
(6)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(6)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   NAS-Port = 1
(6)   Fortinet-SSID = "Test-SSID"
(6)   Fortinet-AP-Name = "FortiAP-231G"
(6)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(6)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(6)   Acct-Session-Id = "665F7372000010D6"
(6)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(6)   WLAN-Pairwise-Cipher = 1027076
(6)   WLAN-Group-Cipher = 1027076
(6)   WLAN-AKM-Suite = 1027077
(6)   WLAN-Group-Mgmt-Cipher = 1027078
(6)   Framed-MTU = 1400
(6)   EAP-Message =
0x02ce053c0d0074703a2f2f31373030353833333335396634303230383030313965663937323934623463332e776573746575726f70652e706b692e617a7572652e6e65742f6365727469666963617465417574686f7269746965732f30623332613064302d376136362d343331632d386535332d6233643061623166646332305f76312f63757272656e742e63726c3082013506082b06010505070101048201273082012330819206082b06010505073002868185687474703a2f2f7072696d6172792d63646e2e706b692e617a7572652e6e65742f776573746575726f70652f636163657274732f31373030353833333335396634303230383030313965663937323934623463332f30623332613064302d376136362d343331632d386535332d6233643061623166646332305f76312f636572742e63657230818b06082b06010505073002867f687474703a2f2f31373030353833333335396634303230383030313965663937323934623463332e776573746575
(6)   State = 0x43d8de594616d3a3db92dc32dd4b50d3
(6)   Message-Authenticator = 0x64ed72ddf554c44cf76c28adf74abb11
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 994
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, CertificateRequest"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHelloDone"
(6) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 206 length 1340
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)     [eap] = updated
(6)     [files] = noop
(6)     [expiration] = noop
(6)     [logintime] = noop
(6)     [pap] = noop
(6)   } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   authenticate {
(6) eap: Removing EAP session with state 0x43d8de594616d3a3
(6) eap: Previous EAP request found for state 0x43d8de594616d3a3,
released from the list
(6) eap: Peer sent packet with method EAP TLS (13)
(6) eap: Calling submodule eap_tls to process data
(6) eap_tls: (TLS) EAP Got final fragment (1334 bytes)
(6) eap_tls: (TLS) EAP Done initial handshake
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server done
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Certificate
(6) eap_tls: (TLS) TLS - Creating attributes from 2 certificate in chain
(6) eap_tls:   TLS-Cert-Serial := "0ac7e70ba67739917f8c5677ba2c77ad"
(6) eap_tls:   TLS-Cert-Expiration := "320804170841Z"
(6) eap_tls:   TLS-Cert-Valid-Since := "240804170841Z"
(6) eap_tls:   TLS-Cert-Subject := "/CN=Intune-Test-CA-Intermediate"
(6) eap_tls:   TLS-Cert-Issuer := "/CN=Intune-Test-CA-Root"
(6) eap_tls:   TLS-Cert-Common-Name := "Intune-Test-CA-Intermediate"
(6) eap_tls: (TLS) TLS - Creating attributes from 1 certificate in chain
(6) eap_tls:   TLS-Client-Cert-Serial := "26db175fb53a5c22c10135ab64383e3b"
(6) eap_tls:   TLS-Client-Cert-Expiration := "240903172213Z"
(6) eap_tls:   TLS-Client-Cert-Valid-Since := "240804171213Z"
(6) eap_tls:   TLS-Client-Cert-Subject :=
"/CN=bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(6) eap_tls:   TLS-Client-Cert-Issuer := "/CN=Intune-Test-CA-Intermediate"
(6) eap_tls:   TLS-Client-Cert-Common-Name :=
"bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(6) eap_tls:   TLS-Client-Cert-Subject-Alt-Name-Dns :=
"bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(6) eap_tls:   TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE"
(6) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web
Client Authentication"
(6) eap_tls:   TLS-Client-Cert-X509v3-Subject-Key-Identifier +=
"A7:63:31:72:8C:59:13:19:6D:3D:18:49:E4:B8:CA:B7:FD:CA:53:10"
(6) eap_tls:   TLS-Client-Cert-X509v3-Authority-Key-Identifier +=
"41:66:F7:B6:51:B4:0B:2A:6B:2B:E9:34:50:25:28:B8:99:7A:BB:B7"
(6) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.2"
Certificate chain - 1 intermediate CA cert(s) untrusted
To forbid these certificates see 'reject_unknown_intermediate_ca'
(TLS) untrusted certificate with depth [1] subject name
/CN=Intune-Test-CA-Intermediate
(TLS) untrusted certificate with depth [0] subject name
/CN=bb1dc43c-a3fd-4f52-aa81-75efd0924933
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read
client certificate
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read
client key exchange
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read
certificate verify
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read
change cipher spec
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Finished
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read finished
(6) eap_tls: (TLS) TLS - send TLS 1.2 ChangeCipherSpec
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
change cipher spec
(6) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Finished
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(6) eap_tls: (TLS) TLS - Handshake state - SSL negotiation finished successfully
(6) eap_tls: (TLS) TLS - Connection Established
(6) eap_tls:   TLS-Session-Cipher-Suite = "ECDHE-ECDSA-AES256-GCM-SHA384"
(6) eap_tls:   TLS-Session-Version = "TLS 1.2"
(6) eap: Sending EAP Request (code 1) ID 207 length 61
(6) eap: EAP session adding &reply:State = 0x43d8de594517d3a3
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6)   Framed-MTU = 994
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
Certificate"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
ClientKeyExchange"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
CertificateVerify"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 ChangeCipherSpec"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Cipher-Suite = "ECDHE-ECDSA-AES256-GCM-SHA384"
(6)   TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 29 from 172.19.4.25:1812 to
172.19.4.1:19061 length 119
(6)   EAP-Message =
0x01cf003d0d8000000033140303000101160303002885c19373a7e99ca92f9bddb73d0b4684f17f8603b8b0e38bd94697d77aaa3ff3f13cf6fe0b38fe5f
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x43d8de594517d3a3db92dc32dd4b50d3
(6) Finished request
Waking up in 4.6 seconds.
(7) Received Access-Request Id 30 from 172.19.4.1:19061 to
172.19.4.25:1812 length 343
(7)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(7)   NAS-IP-Address = 172.19.4.1
(7)   NAS-Identifier = "172.19.10.22/5246-Test-SSID"
(7)   Called-Station-Id = "94-F3-92-34-F9-10:Test-SSID"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   NAS-Port = 1
(7)   Fortinet-SSID = "Test-SSID"
(7)   Fortinet-AP-Name = "FortiAP-231G"
(7)   Calling-Station-Id = "04-7B-CB-B2-B0-C8"
(7)   Connect-Info = "CONNECT 0/0Mbps(Tx/Rx) 11AX_5G"
(7)   Acct-Session-Id = "665F7372000010D6"
(7)   Acct-Multi-Session-Id = "C181680EA09EB2BE"
(7)   WLAN-Pairwise-Cipher = 1027076
(7)   WLAN-Group-Cipher = 1027076
(7)   WLAN-AKM-Suite = 1027077
(7)   WLAN-Group-Mgmt-Cipher = 1027078
(7)   Framed-MTU = 1400
(7)   EAP-Message = 0x02cf00060d00
(7)   State = 0x43d8de594517d3a3db92dc32dd4b50d3
(7)   Message-Authenticator = 0x2b8832a36bf6a661eb3edf2012a9cd61
(7) Restoring &session-state
(7)   &session-state:Framed-MTU = 994
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHello"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, CertificateRequest"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, ServerHelloDone"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.2 Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.2 Handshake, ClientKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.2 Handshake, CertificateVerify"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 ChangeCipherSpec"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-ECDSA-AES256-GCM-SHA384"
(7)   &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name =
"host/bb1dc43c-a3fd-4f52-aa81-75efd0924933", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 207 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)     [eap] = updated
(7)     [files] = noop
(7)     [expiration] = noop
(7)     [logintime] = noop
(7)     [pap] = noop
(7)   } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   authenticate {
(7) eap: Removing EAP session with state 0x43d8de594517d3a3
(7) eap: Previous EAP request found for state 0x43d8de594517d3a3,
released from the list
(7) eap: Peer sent packet with method EAP TLS (13)
(7) eap: Calling submodule eap_tls to process data
(7) eap_tls: (TLS) Peer ACKed our handshake fragment.  handshake is finished
(7) eap: Sending EAP Success (code 3) ID 207 length 4
(7) eap: Freeing handler
(7)     [eap] = ok
(7)   } # authenticate = ok
(7) # Executing section post-auth from file
/etc/freeradius/sites-enabled/default
(7)   post-auth {
(7)     if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) {
(7)     if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name))  -> FALSE
(7)     update {
(7)       &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.3
Handshake, ClientHello'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, ServerHello'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, Certificate'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, Certificate'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, ClientKeyExchange'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, CertificateVerify'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, Finished'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
ChangeCipherSpec'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, Finished'
(7)       &reply::TLS-Session-Cipher-Suite +=
&session-state:TLS-Session-Cipher-Suite[*] ->
'ECDHE-ECDSA-AES256-GCM-SHA384'
(7)       &reply::TLS-Session-Version +=
&session-state:TLS-Session-Version[*] -> 'TLS 1.2'
(7)     } # update = noop
(7)     [exec] = noop
(7)     policy remove_reply_message_if_eap {
(7)       if (&reply:EAP-Message && &reply:Reply-Message) {
(7)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(7)       else {
(7)         [noop] = noop
(7)       } # else = noop
(7)     } # policy remove_reply_message_if_eap = noop
(7)     if (EAP-Key-Name && &reply:EAP-Session-Id) {
(7)     if (EAP-Key-Name && &reply:EAP-Session-Id)  -> FALSE
(7)   } # post-auth = noop
(7) Sent Access-Accept Id 30 from 172.19.4.25:1812 to 172.19.4.1:19061
length 209
(7)   MS-MPPE-Recv-Key =
0xc7c98aade897c8b8b9681688ddc2c07717439319dad715860c7577e87ba237f0
(7)   MS-MPPE-Send-Key =
0x254025f480756bf49a6a01a8b3215185c324ea0da22cda202551d11ea40bdc6d
(7)   EAP-Message = 0x03cf0004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "host/bb1dc43c-a3fd-4f52-aa81-75efd0924933"
(7)   Framed-MTU += 994
(7) Finished request
Waking up in 4.6 seconds.
(0) Cleaning up request packet ID 23 with timestamp +6 due to
cleanup_delay was reached
(1) Cleaning up request packet ID 24 with timestamp +6 due to
cleanup_delay was reached
(2) Cleaning up request packet ID 25 with timestamp +6 due to
cleanup_delay was reached
(3) Cleaning up request packet ID 26 with timestamp +6 due to
cleanup_delay was reached
Waking up in 0.2 seconds.
(4) Cleaning up request packet ID 27 with timestamp +6 due to
cleanup_delay was reached
(5) Cleaning up request packet ID 28 with timestamp +6 due to
cleanup_delay was reached
(6) Cleaning up request packet ID 29 with timestamp +6 due to
cleanup_delay was reached
(7) Cleaning up request packet ID 30 with timestamp +6 due to
cleanup_delay was reached
Ready to process requests

Regards,
Rolf Harald Holmvik

Rolf Harald Holmvik

Alan DeKok

tags

participants (2)