FreeRadius2+daloRAIUS mschap problem: No Cleartext-Password configured
My setup: CentOS 5.5 x32 freeradius2-2.1.7-7.el5 mysql-5.0.77-4.el5_5.3 daloRADIUS 0.9-8 SVN (0.9.-9) used for 802.1x EAP-TLS and EAP-TTLS (maybe for peap in future as well) with Ubiquiti and Mikrotik network equipment setup works perfectly without sql with text conf files. when creating user in sql getting next error: (Output omitted) Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for ubnt123 with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [ubnt123] (from client ubnt port 0 via TLS tunnel) } # server inner-tunnel [ttls] Got tunneled reply code 3 MS-CHAP-Error = "\223E=691 R=1" [ttls] Got tunneled Access-Reject [eap] Handler failed in EAP/ttls [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [ubnt123] (from client ubnt port 0 cli 00-15-6D-5A-4F-5E) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ubnt123 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 4 for 1 seconds I found some topics in regarding this same error in different setups but nothing helped me me to solve this problem. Please help. Thanks in advance.
Denis Iskandarov wrote:
used for 802.1x EAP-TLS and EAP-TTLS (maybe for peap in future as well) with Ubiquiti and Mikrotik network equipment
setup works perfectly without sql with text conf files. when creating user in sql getting next error: (Output omitted)
You have deleted the output which is needed to help you.
Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password.
So... you haven't told the server what the "known good" password is for the user. Go fix that. Alan DeKok.
You have deleted the output which is needed to help you.
Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password.
So... you haven't told the server what the "known good" password is for the user. Go fix that.
Sorry i didn't understand you. which good known password ?I'm using daloRADIUS. and while creating user i appended cleartext password := to it: Here is output of radcheck table: mysql> select * from radcheck; +----+----------+--------------------+----+---------+ | id | username | attribute | op | value | +----+----------+--------------------+----+---------+ | 2 | ubnt123 | Cleartext-Password | := | ubnt321 | +----+----------+--------------------+----+---------+ It's almost same string as in users text conf, but in mysql table form. Something changed while using sql. freeradius or mschap can't understand this field. Don't know why. Here is full debug output: FreeRADIUS Version 2.1.7, for host i686-redhat-linux-gnu, built on Mar 31 2010 at 00:25:31 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "lettheserverin" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "radpass" radius_db = "radiusdb" read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/sqltrace.sql" readclients = yes deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radiusdb rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret FROM nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Read entry nasname=192.168.0.140,shortname=ubntAP,secret=secret123 rlm_sql (sql): Adding client 192.168.0.140 (ubntAP, server=<none>) to clients list rlm_sql (sql): Released sql socket id: 4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.0.140 port 2049, id=1, length=149 User-Name = "anonymous" NAS-Port = 0 Called-Station-Id = "00-15-6D-5A-50-3B:denis" Calling-Station-Id = "00-15-6D-5A-4F-5E" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x02fa000e01616e6f6e796d6f7573 Message-Authenticator = 0xac94d259aa586e1aa292f1aadfdc7339 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 250 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop [sql] expand: %{User-Name} -> anonymous [sql] sql_set_user escaped user --> 'anonymous' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'anonymous' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 [sql] User anonymous not found ++[sql] returns notfound ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.0.140 port 2049 EAP-Message = 0x01fb00061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0cf285250c099090f5ca032a85c8d937 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.140 port 2049, id=2, length=215 User-Name = "anonymous" NAS-Port = 0 Called-Station-Id = "00-15-6D-5A-50-3B:denis" Calling-Station-Id = "00-15-6D-5A-4F-5E" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x02fb003e150016030100330100002f03014c7eb17031983dc1f05cf67c4874672da16661e0a6bb6b5bf02b9363bb09aecd000008002f000a000500040100 State = 0x0cf285250c099090f5ca032a85c8d937 Message-Authenticator = 0x28f397a6bd9217ead8012b8e68633262 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 251 length 62 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] eaptls_verify returned 7 [ttls] Done initial handshake [ttls] (other): before/accept initialization [ttls] TLS_accept: before/accept initialization [ttls] <<< TLS 1.0 Handshake [length 0033], ClientHello [ttls] TLS_accept: SSLv3 read client hello A [ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello [ttls] TLS_accept: SSLv3 write server hello A [ttls] >>> TLS 1.0 Handshake [length 07ad], Certificate [ttls] TLS_accept: SSLv3 write certificate A [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [ttls] TLS_accept: SSLv3 write server done A [ttls] TLS_accept: SSLv3 flush data [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.0.140 port 2049 EAP-Message = 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 EAP-Message = 0x0603550406130247453110300e060355040813075462696c697369310c300a060355040a130343444e311430120603550403140b7365727665725f636572743120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100cb28b5fad4ee983cefa247bb9644d3f03104dbb70b2ae7ce305cc29b3a0c01613aa8c6658c899242480eafc4033b17592f91249c80eac7f4e76e1b68c23b0f3a8488c78bc31cf4f89a02c04c7b1c4b18e42cebc258562c95c1f7fadabf8829e564320a5d44c36a44821de34eb1f8372e00f71fea0bbd9427714e17 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x075462696c6973693110300e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0cf285250d0e9090f5ca032a85c8d937 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.140 port 2049, id=3, length=159 User-Name = "anonymous" NAS-Port = 0 Called-Station-Id = "00-15-6D-5A-50-3B:denis" Calling-Station-Id = "00-15-6D-5A-4F-5E" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x02fc00061500 State = 0x0cf285250d0e9090f5ca032a85c8d937 Message-Authenticator = 0xa3ef774453c0ceeed3d7cadf55a96a69 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 252 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] Received TLS ACK [ttls] ACK handshake fragment handler [ttls] eaptls_verify returned 1 [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 3 to 192.168.0.140 port 2049 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xe316030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0cf285250e0f9090f5ca032a85c8d937 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.0.140 port 2049, id=4, length=487 User-Name = "anonymous" NAS-Port = 0 Called-Station-Id = "00-15-6D-5A-50-3B:denis" Calling-Station-Id = "00-15-6D-5A-4F-5E" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 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 EAP-Message = 0xda4133913245d2068dec21a27bcd2922a292f927140301000101160301003042e373239e0843a4cc250d4342abdaf298288de885cb0825dc750e28fd1fbcdf75106d9f6c093d5ce93d492f62825c41 State = 0x0cf285250e0f9090f5ca032a85c8d937 Message-Authenticator = 0x0b6c83a177b8adad5b12d5fc90fe405a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 253 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] eaptls_verify returned 7 [ttls] Done initial handshake [ttls] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [ttls] TLS_accept: SSLv3 read client key exchange A [ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001] [ttls] <<< TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 read finished A [ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001] [ttls] TLS_accept: SSLv3 write change cipher spec A [ttls] >>> TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 write finished A [ttls] TLS_accept: SSLv3 flush data [ttls] (other): SSL negotiation finished successfully SSL Connection Established [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 4 to 192.168.0.140 port 2049 EAP-Message = 0x01fe004515800000003b1403010001011603010030e229dc1cb062dfcf15b5c71e1f18002e2d6cce47fbf54724de37fb2ed5329ed1ac412e6ea508d09050bd03da519b7ae0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0cf285250f0c9090f5ca032a85c8d937 Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.0.140 port 2049, id=5, length=308 User-Name = "anonymous" NAS-Port = 0 Called-Station-Id = "00-15-6D-5A-50-3B:denis" Calling-Station-Id = "00-15-6D-5A-4F-5E" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x02fe009b1500170301009098a967b0a969cc0bbd49ab57cba686cbd09013ca867e242837a92588718deec4e3947e1ea64fd2694bc222d95f4e379c0e62b2fc6079078b4feed51734ea75c7a8a735e3e7134f0799a5d642fc90f72630e94bd2f140a76881ec9e515c632f4d78ef9f0cd2f9e1c56d215c7dd1034d608599551a5394d4f420376505253e9787ae0947bdbff64be2247e3f7774b4f680 State = 0x0cf285250f0c9090f5ca032a85c8d937 Message-Authenticator = 0x87a22190cd135e6f6eb1ced42076c5e2 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 254 length 155 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] eaptls_verify returned 7 [ttls] Done initial handshake [ttls] eaptls_process returned 7 [ttls] Session established. Proceeding to decode tunneled attributes. [ttls] Got tunneled request User-Name = "ubnt123" MS-CHAP-Challenge = 0xab051a6f881fd88d7a8835046659db14 MS-CHAP2-Response = 0x6d005c024ea0d4b07c90ec0c577a21f1a883000000000000000046b4f8c18e124e6475085b321c43a12df5897af9ae580006 FreeRADIUS-Proxied-To = 127.0.0.1 [ttls] Sending tunneled request User-Name = "ubnt123" MS-CHAP-Challenge = 0xab051a6f881fd88d7a8835046659db14 MS-CHAP2-Response = 0x6d005c024ea0d4b07c90ec0c577a21f1a883000000000000000046b4f8c18e124e6475085b321c43a12df5897af9ae580006 FreeRADIUS-Proxied-To = 127.0.0.1 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[unix] returns notfound [suffix] No '@' in User-Name = "ubnt123", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for ubnt123 with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [ubnt123] (from client ubntAP port 0 via TLS tunnel) } # server inner-tunnel [ttls] Got tunneled reply code 3 MS-CHAP-Error = "mE=691 R=1" [ttls] Got tunneled Access-Reject [eap] Handler failed in EAP/ttls [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [anonymous] (from client ubntAP port 0 cli 00-15-6D-5A-4F-5E) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> anonymous attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 4 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 4 Sending Access-Reject of id 5 to 192.168.0.140 port 2049 EAP-Message = 0x04fe0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. Cleaning up request 0 ID 1 with timestamp +64 Cleaning up request 1 ID 2 with timestamp +64 Cleaning up request 2 ID 3 with timestamp +64 Cleaning up request 3 ID 4 with timestamp +64 Waking up in 1.0 seconds. Cleaning up request 4 ID 5 with timestamp +64 Ready to process requests.
Denis Iskandarov wrote:
Sorry i didn't understand you. which good known password ?I'm using daloRADIUS. and while creating user i appended cleartext password := to it: Here is output of radcheck table:
Yes...
It's almost same string as in users text conf, but in mysql table form. Something changed while using sql. freeradius or mschap can't understand this field. Don't know why.
It's in the debug output. You uncommented "sql" in raddb/sites-enabled/default, but *not* in raddb/sites-enabled/inner-tunnel Alan DeKok.
On 09/10/2010 09:18 AM, Denis Iskandarov wrote:
You have deleted the output which is needed to help you.
Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password.
So... you haven't told the server what the "known good" password is for the user. Go fix that.
Sorry i didn't understand you. which good known password ?I'm using daloRADIUS. and while creating user i appended cleartext password := to it: Here is output of radcheck table:
mysql> select * from radcheck; +----+----------+--------------------+----+---------+ | id | username | attribute | op | value | +----+----------+--------------------+----+---------+ | 2 | ubnt123 | Cleartext-Password | := | ubnt321 | +----+----------+--------------------+----+---------+
It's almost same string as in users text conf, but in mysql table form. Something changed while using sql. freeradius or mschap can't understand this field. Don't know why. Here is full debug output:
It doesn't look like you've got sql enabled in the inner tunnel (e.g. the virtual server invoked after a TLS session is established). Edit your config to enable sql in the inner-tunnel. -- John Dennis <jdennis@redhat.com> Looking to carve out IT costs? www.redhat.com/carveoutcosts/
Thanks too all of You !!!!! It worked!!!!!!! I saw all the documentations on freeradius, different howtos and forum threads, but didn't saw this option. why people didn't wrote about this. Also one newbie question about this mailing list: How should i answer on answers of my thread? Put Re:Re: in the beginning ?
Am 10.09.2010 um 16:18 schrieb Denis Iskandarov: [...]
Also one newbie question about this mailing list: How should i answer on answers of my thread? Put Re:Re: in the beginning ?
One "Re:" is enough. (If somebody really wants to see threads' hierachies, he should use an email program that can display them.)
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Have a nice day! Nicolas Goutte extragroup GmbH - Karlsruhe Waldstr. 49 76133 Karlsruhe Germany Geschäftsführer: Lars Busch Registergericht: Amtsgericht Münster / HRB: 5624 Steuer Nr.: 337/5903/0421 / UstID: DE 204607841
participants (4)
-
Alan DeKok -
Denis Iskandarov -
John Dennis -
Nicolas Goutte