While running radiusd -X, I have following error. Would you please help.. # Loading post-auth { ...} I # server inner tunnel server default { # from file fusr/locat/freeradius3 etc/raddbisites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading accounting (...) # Loading post auth f...} 1 # server default radiusd: #### Opening IP addresses -,.d Por-Is #### listen f type = "auth" ipaddr . 172.1.40.14 port , 18120 listen type - "auth' ipaddr * port = 0 limit { max_connections lifetime 0 idletimeout = 30 Failed inding to auth a..ress 4- port 1812 bound to server .e au t: EADDRINUSE: Ad.ress a ready in use iusr/local/freeradlus3/etc/raddb/-enabledidefault[59]: Error binding to port for 0.0.0.0 port 1812 EXIT(1) CALLED src r'2.53]. ,,- error was: 1d.,0.1: radiusd: fatal: /usr/local/freeradius3/libi.roto <http://auth.so:> auth.so: o.en failed: No such Thanks, Mohammed Ejaz Asst. Operation Director of Systems. Cyberia SAUDI ARABIA P.O.Box: 301079, Riyadh 11372 Phone: (+966) 11 464 7114 Ext. 140 Mobile: (+966) 562311787 Fax: (+966) 11 465 4735 Website: http://www.cyberia.net.sa
Hi,
While running radiusd -X, I have following error. Would you please help..
<snip>
Failed inding to auth a..ress 4- port 1812 bound to server .e au t: EADDRINUSE: Ad.ress a ready in use iusr/local/freeradlus3/etc/raddb/-enabledidefault[59]: Error binding to port for 0.0.0.0 port 1812
thats your problem there - the FreeRADIUS daemon is already running - perhaps as a system startup script? killall radiusd radiusd -X
Hello allo. Sorry for repeating the same question.. as suggested I successfully stopped and start the radius service, but still has an issue, when I changed the IP to something else. When I revert it back to its orginal IP all went well. Now my question is, after changing the IP should reboot entire server or need to change an IP in any of the file such as (" /usr/local/freeradlus3/etc/raddb/-enabled/default") ?? Find the attached error. With the existing IP currently Radius is running without any problem.. listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 172.17.40.138 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests Problem is only when I changed the IP from 172.17.40.138 to 172.17.40.134 Thanks in advance for your help.. Ejaz -----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+mejaz=cyberia.net.sa@lists.freeradius.org] On Behalf Of A.L.M.Buxey@lboro.ac.uk Sent: Thursday, August 11, 2016 4:28 PM To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: missing.auth.so Hi,
While running radiusd -X, I have following error. Would you please help..
<snip>
Failed inding to auth a..ress 4- port 1812 bound to server .e au t:
EADDRINUSE: Ad.ress a ready in use
iusr/local/freeradlus3/etc/raddb/-enabledidefault[59]: Error binding
to port for 0.0.0.0 port 1812
thats your problem there - the FreeRADIUS daemon is already running - perhaps as a system startup script? killall radiusd radiusd -X - List info/subscribe/unsubscribe? See <http://www.freeradius.org/list/users.html> http://www.freeradius.org/list/users.html
On 28 Sep 2016, at 09:30, Ejaz <mejaz@cyberia.net.sa> wrote:
Problem is only when I changed the IP from 172.17.40.138 to 172.17.40.134
* Have you assigned the same port/IP tuple to multiple virtual servers? * Is 172.17.40.134 bound to an interface? * Are you actually stopping the radiusd properly? All people can do is guess until you post a full debug log of it failing though. Regards, Adam Bishop Systems Development Specialist gpg: E75B 1F92 6407 DFDF 9F1C BF10 C993 2504 6609 D460 t: +44 (0)1235 822 245 xmpp: adamb@jabber.dev.ja.net jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.
* Have you assigned the same port/IP tuple to multiple virtual servers? The same IP is already assign to another server just I was disconnecting/removing the network cable. And re assigning this IP to my new server in which I am facing problem. * Is 172.17.40.134 bound to an interface? Yes, it is bound to and physical interface of solaris11 box. * Are you actually stopping the radiusd properly? Yes I did, do you recommend to reboot the entire server, is that helps?? Ejaz -----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+mejaz=cyberia.net.sa@lists.freeradius.org] On Behalf Of Adam Bishop Sent: Wednesday, September 28, 2016 1:59 PM To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: missing.auth.so On 28 Sep 2016, at 09:30, Ejaz <mejaz@cyberia.net.sa> wrote:
Problem is only when I changed the IP from 172.17.40.138 to 172.17.40.134
* Have you assigned the same port/IP tuple to multiple virtual servers? * Is 172.17.40.134 bound to an interface? * Are you actually stopping the radiusd properly? All people can do is guess until you post a full debug log of it failing though. Regards, Adam Bishop Systems Development Specialist gpg: E75B 1F92 6407 DFDF 9F1C BF10 C993 2504 6609 D460 t: +44 (0)1235 822 245 xmpp: adamb@jabber.dev.ja.net jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (3)
-
A.L.M.Buxey＠lboro.ac.uk -
Adam Bishop -
Ejaz