Hi, I'm trying to configure freeradius with wireles eap. It works, but in debug mode there are some warnings. #v+ root@radius01:/etc/freeradius# freeradius -X Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/dhcp including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/logintime including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/abfab-tr including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client MGMT_network { ipaddr = 172.28.0.0/16 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client testNetwork { ipaddr = 172.21.7.0/24 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = digest radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_soh # Instantiating module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_detail # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_files # Instantiating module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" usersfile = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/freeradius/mods-config/files/authorize [/etc/freeradius/mods-config/files/authorize]:56 Cistron compatibility checks for entry bob ... [/etc/freeradius/mods-config/files/authorize]:187 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:194 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:200 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/freeradius/mods-config/files/authorize [/etc/freeradius/mods-config/files/authorize]:56 Cistron compatibility checks for entry bob ... [/etc/freeradius/mods-config/files/authorize]:187 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:194 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:200 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Loaded module rlm_pap # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_expr # Instantiating module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/freeradius/mods-enabled/dhcp # Loaded module rlm_exec # Instantiating module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_eap # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Instantiating module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_unix # Instantiating module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_digest # Instantiating module "digest" from file /etc/freeradius/mods-enabled/digest # Instantiating module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_always # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests (0) Received Access-Request Id 48 from 172.21.7.176:55431 to 172.21.7.175:1812 length 212 (0) Service-Type = Framed-User (0) Framed-MTU = 1400 (0) User-Name = 'bob' (0) NAS-Port-Id = 'wlan1' (0) NAS-Port-Type = Wireless-802.11 (0) Acct-Session-Id = '82000006' (0) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (0) Calling-Station-Id = '44-74-6C-CB-FE-1E' (0) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (0) EAP-Message = 0x0200000801626f62 (0) Message-Authenticator = 0xf11fbb978dd91276979ee0a70e494997 (0) NAS-Identifier = 'TestowyMT' (0) NAS-IP-Address = 172.21.7.176 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (!&User-Name) { (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) { (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "bob", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent code Response (2) ID 0 length 8 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent method Identity (1) (0) eap: Calling eap_peap to process EAP data (0) eap_peap: Flushing SSL sessions (of #0) (0) eap_peap: Initiate (0) eap_peap: Start returned 1 (0) eap: EAP session adding &reply:State = 0xc4f3e4bfc4f2fded (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Sent Access-Challenge Id 48 from 172.21.7.175:1812 to 172.21.7.176:55431 length 64 (0) EAP-Message = 0x010100061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc4f3e4bfc4f2fdedb35262d2c5aab0d9 (0) Finished request Waking up in 0.6 seconds. (1) Received Access-Request Id 49 from 172.21.7.176:36135 to 172.21.7.175:1812 length 430 (1) Service-Type = Framed-User (1) Framed-MTU = 1400 (1) User-Name = 'bob' (1) State = 0xc4f3e4bfc4f2fdedb35262d2c5aab0d9 (1) NAS-Port-Id = 'wlan1' (1) NAS-Port-Type = Wireless-802.11 (1) Acct-Session-Id = '82000006' (1) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (1) Calling-Station-Id = '44-74-6C-CB-FE-1E' (1) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (1) EAP-Message = 0x020100d01980000000c616030100c1010000bd030155151cf5b9600d759333eba3c89a2d098d1bad383b549a05d00f18b2f2a6374f000054c014c00ac022c02100390038c00fc0050035c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032c00ec004002fc011c007c00cc00200 (1) Message-Authenticator = 0xbbc81b6fb14e1ec3cb4e810ff7892db8 (1) NAS-Identifier = 'TestowyMT' (1) NAS-IP-Address = 172.21.7.176 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (!&User-Name) { (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) { (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bob", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent code Response (2) ID 1 length 208 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = EAP (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xc4f3e4bfc4f2fded (1) eap: Finished EAP session with state 0xc4f3e4bfc4f2fded (1) eap: Previous EAP request found for state 0xc4f3e4bfc4f2fded, released from the list (1) eap: Peer sent method PEAP (25) (1) eap: EAP PEAP (25) (1) eap: Calling eap_peap to process EAP data (1) eap_peap: processing EAP-TLS (1) eap_peap: TLS Length 198 (1) eap_peap: Length Included (1) eap_peap: eaptls_verify returned 11 (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< TLS 1.0 Handshake [length 00c1], ClientHello (1) eap_peap: TLS_accept: SSLv3 read client hello A (1) eap_peap: >>> TLS 1.0 Handshake [length 0059], ServerHello (1) eap_peap: TLS_accept: SSLv3 write server hello A (1) eap_peap: >>> TLS 1.0 Handshake [length 08d0], Certificate (1) eap_peap: TLS_accept: SSLv3 write certificate A (1) eap_peap: >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_peap: TLS_accept: SSLv3 write key exchange A (1) eap_peap: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap: TLS_accept: SSLv3 write server done A (1) eap_peap: TLS_accept: SSLv3 flush data (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (1) eap_peap: eaptls_process returned 13 (1) eap_peap: FR_TLS_HANDLED (1) eap: EAP session adding &reply:State = 0xc4f3e4bfc5f1fded (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Sent Access-Challenge Id 49 from 172.21.7.175:1812 to 172.21.7.176:36135 length 1068 (1) EAP-Message = 0x010203ec19c000000a8c160301005902000055030155151cebf6ba12c24349fa22bd93cb3f3ab5f534a518ea798eb10bc68520f85e2088047a7836777c91caec026c2987818176f396d62108680d7be0ec280ce6a955c01400000dff01000100000b00040300010216030108d00b0008cc0008c90003de (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc4f3e4bfc5f1fdedb35262d2c5aab0d9 (1) Finished request Waking up in 0.6 seconds. (2) Received Access-Request Id 50 from 172.21.7.176:51966 to 172.21.7.175:1812 length 228 (2) Service-Type = Framed-User (2) Framed-MTU = 1400 (2) User-Name = 'bob' (2) State = 0xc4f3e4bfc5f1fdedb35262d2c5aab0d9 (2) NAS-Port-Id = 'wlan1' (2) NAS-Port-Type = Wireless-802.11 (2) Acct-Session-Id = '82000006' (2) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (2) Calling-Station-Id = '44-74-6C-CB-FE-1E' (2) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (2) EAP-Message = 0x020200061900 (2) Message-Authenticator = 0x65c387e65b9cad3f43afd6b4c2cf3c5c (2) NAS-Identifier = 'TestowyMT' (2) NAS-IP-Address = 172.21.7.176 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (!&User-Name) { (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) { (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "bob", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent code Response (2) ID 2 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xc4f3e4bfc5f1fded (2) eap: Finished EAP session with state 0xc4f3e4bfc5f1fded (2) eap: Previous EAP request found for state 0xc4f3e4bfc5f1fded, released from the list (2) eap: Peer sent method PEAP (25) (2) eap: EAP PEAP (25) (2) eap: Calling eap_peap to process EAP data (2) eap_peap: processing EAP-TLS (2) eap_peap: Received TLS ACK (2) eap_peap: Received TLS ACK (2) eap_peap: ACK handshake fragment handler (2) eap_peap: eaptls_verify returned 1 (2) eap_peap: eaptls_process returned 13 (2) eap_peap: FR_TLS_HANDLED (2) eap: EAP session adding &reply:State = 0xc4f3e4bfc6f0fded (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Sent Access-Challenge Id 50 from 172.21.7.175:1812 to 172.21.7.176:51966 length 1064 (2) EAP-Message = 0x010303e81940ea52ccfd63018f5baeca18786b3111106d5c3d807a09c17d63a23a5b576f5b0825c80faf7ae59a57fcf595b9880bd17efdb9433f832cf521828d0161b1d1493fbaeb0adc8779aca5e8e0b7819b66665d626978e5e075e9dccbb3f767e05fabc5d635e333b48233b1e40004e5308204e130 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc4f3e4bfc6f0fdedb35262d2c5aab0d9 (2) Finished request Waking up in 0.6 seconds. (3) Received Access-Request Id 51 from 172.21.7.176:44159 to 172.21.7.175:1812 length 228 (3) Service-Type = Framed-User (3) Framed-MTU = 1400 (3) User-Name = 'bob' (3) State = 0xc4f3e4bfc6f0fdedb35262d2c5aab0d9 (3) NAS-Port-Id = 'wlan1' (3) NAS-Port-Type = Wireless-802.11 (3) Acct-Session-Id = '82000006' (3) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (3) Calling-Station-Id = '44-74-6C-CB-FE-1E' (3) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (3) EAP-Message = 0x020300061900 (3) Message-Authenticator = 0x48978be4e626a71976b9195dcb93e3ed (3) NAS-Identifier = 'TestowyMT' (3) NAS-IP-Address = 172.21.7.176 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (!&User-Name) { (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) { (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "bob", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent code Response (2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc4f3e4bfc6f0fded (3) eap: Finished EAP session with state 0xc4f3e4bfc6f0fded (3) eap: Previous EAP request found for state 0xc4f3e4bfc6f0fded, released from the list (3) eap: Peer sent method PEAP (25) (3) eap: EAP PEAP (25) (3) eap: Calling eap_peap to process EAP data (3) eap_peap: processing EAP-TLS (3) eap_peap: Received TLS ACK (3) eap_peap: Received TLS ACK (3) eap_peap: ACK handshake fragment handler (3) eap_peap: eaptls_verify returned 1 (3) eap_peap: eaptls_process returned 13 (3) eap_peap: FR_TLS_HANDLED (3) eap: EAP session adding &reply:State = 0xc4f3e4bfc7f7fded (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Sent Access-Challenge Id 51 from 172.21.7.175:1812 to 172.21.7.176:44159 length 780 (3) EAP-Message = 0x010402ce190020417574686f7269747982090093d70bc70119a89b300c0603551d13040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e636f6d2f6578616d706c655f63612e63726c300d06092a864886f70d0101050500038201010076b7 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc4f3e4bfc7f7fdedb35262d2c5aab0d9 (3) Finished request Waking up in 0.5 seconds. (4) Received Access-Request Id 52 from 172.21.7.176:42871 to 172.21.7.175:1812 length 366 (4) Service-Type = Framed-User (4) Framed-MTU = 1400 (4) User-Name = 'bob' (4) State = 0xc4f3e4bfc7f7fdedb35262d2c5aab0d9 (4) NAS-Port-Id = 'wlan1' (4) NAS-Port-Type = Wireless-802.11 (4) Acct-Session-Id = '82000006' (4) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (4) Calling-Station-Id = '44-74-6C-CB-FE-1E' (4) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (4) EAP-Message = 0x020400901980000000861603010046100000424104eda1e096f754c51f491c67cce1d3501b9dec09a17ad4dd3df167dedea74e7da886fa0701ad6fdc3c1a5e9110939d32abd189b3e9c20551fbef7dc1ac889e81a9140301000101160301003063ee38bed2c1fd1ac035ff6af8b278ef434ed12a9e0d94 (4) Message-Authenticator = 0xb99839c1aa5b29d7788c79853bc608e9 (4) NAS-Identifier = 'TestowyMT' (4) NAS-IP-Address = 172.21.7.176 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (!&User-Name) { (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) { (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bob", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent code Response (2) ID 4 length 144 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xc4f3e4bfc7f7fded (4) eap: Finished EAP session with state 0xc4f3e4bfc7f7fded (4) eap: Previous EAP request found for state 0xc4f3e4bfc7f7fded, released from the list (4) eap: Peer sent method PEAP (25) (4) eap: EAP PEAP (25) (4) eap: Calling eap_peap to process EAP data (4) eap_peap: processing EAP-TLS (4) eap_peap: TLS Length 134 (4) eap_peap: Length Included (4) eap_peap: eaptls_verify returned 11 (4) eap_peap: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange (4) eap_peap: TLS_accept: SSLv3 read client key exchange A (4) eap_peap: <<< TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap: <<< TLS 1.0 Handshake [length 0010], Finished (4) eap_peap: TLS_accept: SSLv3 read finished A (4) eap_peap: >>> TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap: TLS_accept: SSLv3 write change cipher spec A (4) eap_peap: >>> TLS 1.0 Handshake [length 0010], Finished (4) eap_peap: TLS_accept: SSLv3 write finished A (4) eap_peap: TLS_accept: SSLv3 flush data SSL: adding session 88047a7836777c91caec026c2987818176f396d62108680d7be0ec280ce6a955 to cache (4) eap_peap: (other): SSL negotiation finished successfully SSL Connection Established (4) eap_peap: eaptls_process returned 13 (4) eap_peap: FR_TLS_HANDLED (4) eap: EAP session adding &reply:State = 0xc4f3e4bfc0f6fded (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Sent Access-Challenge Id 52 from 172.21.7.175:1812 to 172.21.7.176:42871 length 123 (4) EAP-Message = 0x01050041190014030100010116030100309f50896699f8ca775023b9ca2f51332ce352d1681fbb18dcc703a8dc155ce7d78238d5df2ba4e5a3d3f41d3f167f39cc (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xc4f3e4bfc0f6fdedb35262d2c5aab0d9 (4) Finished request Waking up in 0.5 seconds. (5) Received Access-Request Id 53 from 172.21.7.176:49148 to 172.21.7.175:1812 length 228 (5) Service-Type = Framed-User (5) Framed-MTU = 1400 (5) User-Name = 'bob' (5) State = 0xc4f3e4bfc0f6fdedb35262d2c5aab0d9 (5) NAS-Port-Id = 'wlan1' (5) NAS-Port-Type = Wireless-802.11 (5) Acct-Session-Id = '82000006' (5) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (5) Calling-Station-Id = '44-74-6C-CB-FE-1E' (5) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (5) EAP-Message = 0x020500061900 (5) Message-Authenticator = 0xcdc4f70353c04e75481bef2a720e9a63 (5) NAS-Identifier = 'TestowyMT' (5) NAS-IP-Address = 172.21.7.176 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (!&User-Name) { (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) { (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent code Response (2) ID 5 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xc4f3e4bfc0f6fded (5) eap: Finished EAP session with state 0xc4f3e4bfc0f6fded (5) eap: Previous EAP request found for state 0xc4f3e4bfc0f6fded, released from the list (5) eap: Peer sent method PEAP (25) (5) eap: EAP PEAP (25) (5) eap: Calling eap_peap to process EAP data (5) eap_peap: processing EAP-TLS (5) eap_peap: Received TLS ACK (5) eap_peap: Received TLS ACK (5) eap_peap: ACK handshake is finished (5) eap_peap: eaptls_verify returned 3 (5) eap_peap: eaptls_process returned 3 (5) eap_peap: FR_TLS_SUCCESS (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: EAP session adding &reply:State = 0xc4f3e4bfc1f5fded (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Sent Access-Challenge Id 53 from 172.21.7.175:1812 to 172.21.7.176:49148 length 101 (5) EAP-Message = 0x0106002b19001703010020450aabab255e3952dd3e248e84d684492b174c26a1ec2906b22a8ad21795f58a (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xc4f3e4bfc1f5fdedb35262d2c5aab0d9 (5) Finished request Waking up in 0.4 seconds. (6) Received Access-Request Id 54 from 172.21.7.176:48068 to 172.21.7.175:1812 length 302 (6) Service-Type = Framed-User (6) Framed-MTU = 1400 (6) User-Name = 'bob' (6) State = 0xc4f3e4bfc1f5fdedb35262d2c5aab0d9 (6) NAS-Port-Id = 'wlan1' (6) NAS-Port-Type = Wireless-802.11 (6) Acct-Session-Id = '82000006' (6) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (6) Calling-Station-Id = '44-74-6C-CB-FE-1E' (6) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (6) EAP-Message = 0x0206005019001703010020bbf49c5de60dbc5f4d92bf760437c00ec320fada6d06f831c1e20622b8a28e921703010020c3afda2de7ccafce02b9ae264b0f9e878a476f1235b0310d7c65edf07294ea6e (6) Message-Authenticator = 0x8f4b8abc01340495ad3b75e2d7314ef5 (6) NAS-Identifier = 'TestowyMT' (6) NAS-IP-Address = 172.21.7.176 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (!&User-Name) { (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) { (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent code Response (2) ID 6 length 80 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xc4f3e4bfc1f5fded (6) eap: Finished EAP session with state 0xc4f3e4bfc1f5fded (6) eap: Previous EAP request found for state 0xc4f3e4bfc1f5fded, released from the list (6) eap: Peer sent method PEAP (25) (6) eap: EAP PEAP (25) (6) eap: Calling eap_peap to process EAP data (6) eap_peap: processing EAP-TLS (6) eap_peap: eaptls_verify returned 7 (6) eap_peap: Done initial handshake (6) eap_peap: eaptls_process returned 7 (6) eap_peap: FR_TLS_OK (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - bob (6) eap_peap: Got inner identity 'bob' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0206000801626f62 (6) eap_peap: Setting User-Name to bob (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0206000801626f62 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = 'bob' (6) Virtual server received request (6) EAP-Message = 0x0206000801626f62 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = 'bob' (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (6) authorize { (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := 'LOCAL' (6) } # update control = noop (6) eap: Peer sent code Response (2) ID 6 length 8 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (6) Found Auth-Type = EAP (6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent method Identity (1) (6) eap: Calling eap_mschapv2 to process EAP data (6) eap_mschapv2: Issuing Challenge (6) eap: EAP session adding &reply:State = 0x417a42e3417d5897 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0107001d1a01070018105c69173875a6dce386f9f3f2a3eb73cb626f62 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x417a42e3417d589754fee2901ab0a5ab (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0107001d1a01070018105c69173875a6dce386f9f3f2a3eb73cb626f62 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x417a42e3417d589754fee2901ab0a5ab (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0107001d1a01070018105c69173875a6dce386f9f3f2a3eb73cb626f62 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x417a42e3417d589754fee2901ab0a5ab (6) eap_peap: Got tunneled Access-Challenge (6) eap: EAP session adding &reply:State = 0xc4f3e4bfc2f4fded (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) Sent Access-Challenge Id 54 from 172.21.7.175:1812 to 172.21.7.176:48068 length 117 (6) EAP-Message = 0x0107003b19001703010030a33322042f0e83c5d91044bb52646dbee22caff2c1df9738aecdd3e7f2daa98e935cd79459e3136f92ed86c4c19fe675 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xc4f3e4bfc2f4fdedb35262d2c5aab0d9 (6) Finished request Waking up in 0.4 seconds. (7) Received Access-Request Id 55 from 172.21.7.176:39389 to 172.21.7.175:1812 length 350 (7) Service-Type = Framed-User (7) Framed-MTU = 1400 (7) User-Name = 'bob' (7) State = 0xc4f3e4bfc2f4fdedb35262d2c5aab0d9 (7) NAS-Port-Id = 'wlan1' (7) NAS-Port-Type = Wireless-802.11 (7) Acct-Session-Id = '82000006' (7) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (7) Calling-Station-Id = '44-74-6C-CB-FE-1E' (7) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (7) EAP-Message = 0x0207008019001703010020acb0654a85d5f4c4a61c8ce00c007ea6a4cc953d1409392cb02d5b5c81ea65ca1703010050180dc887c8fa3458b796c66b229642e9a5618e3752ff36ee9a3839b1a419a8ea1b1ca1f06a33b61b06570ab0c3c94cba939f8ce4ff0f686943ad1cbfe84aee5f35abef58c6b8b6 (7) Message-Authenticator = 0x19444e36c349d1b30ba89b5791633082 (7) NAS-Identifier = 'TestowyMT' (7) NAS-IP-Address = 172.21.7.176 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (!&User-Name) { (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) { (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent code Response (2) ID 7 length 128 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x417a42e3417d5897 (7) eap: Finished EAP session with state 0xc4f3e4bfc2f4fded (7) eap: Previous EAP request found for state 0xc4f3e4bfc2f4fded, released from the list (7) eap: Peer sent method PEAP (25) (7) eap: EAP PEAP (25) (7) eap: Calling eap_peap to process EAP data (7) eap_peap: processing EAP-TLS (7) eap_peap: eaptls_verify returned 7 (7) eap_peap: Done initial handshake (7) eap_peap: eaptls_process returned 7 (7) eap_peap: FR_TLS_OK (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP type MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0207003e1a02070039315849184725258ed58c5f89c92b357e100000000000000000130908b4d20b9dd367f1ccdaf95ed8bd97269b2d794fff0e00626f62 (7) eap_peap: Setting User-Name to bob (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0207003e1a02070039315849184725258ed58c5f89c92b357e100000000000000000130908b4d20b9dd367f1ccdaf95ed8bd97269b2d794fff0e00626f62 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = 'bob' (7) eap_peap: State = 0x417a42e3417d589754fee2901ab0a5ab (7) Virtual server received request (7) EAP-Message = 0x0207003e1a02070039315849184725258ed58c5f89c92b357e100000000000000000130908b4d20b9dd367f1ccdaf95ed8bd97269b2d794fff0e00626f62 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = 'bob' (7) State = 0x417a42e3417d589754fee2901ab0a5ab (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (7) authorize { (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := 'LOCAL' (7) } # update control = noop (7) eap: Peer sent code Response (2) ID 7 length 62 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry bob at line 56 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (7) Found Auth-Type = EAP (7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x417a42e3417d5897 (7) eap: Finished EAP session with state 0x417a42e3417d5897 (7) eap: Previous EAP request found for state 0x417a42e3417d5897, released from the list (7) eap: Peer sent method MSCHAPv2 (26) (7) eap: EAP MSCHAPv2 (26) (7) eap: Calling eap_mschapv2 to process EAP data (7) eap_mschapv2: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) eap_mschapv2: Auth-Type MS-CHAP { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Found Cleartext-Password, hashing to create LM-Password (7) mschap: Creating challenge hash with username: bob (7) mschap: Client is using MS-CHAPv2 (7) mschap: Adding MS-CHAPv2 MPPE keys (7) [mschap] = ok (7) } # Auth-Type MS-CHAP = ok (7) MSCHAP Success (7) eap: EAP session adding &reply:State = 0x417a42e340725897 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) Reply-Message = 'Hello bob' (7) EAP-Message = 0x010800331a0307002e533d33424641324344374138453246393746383631334334363638364344383043353243313241314333 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x417a42e34072589754fee2901ab0a5ab (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: Reply-Message = 'Hello bob' (7) eap_peap: EAP-Message = 0x010800331a0307002e533d33424641324344374138453246393746383631334334363638364344383043353243313241314333 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x417a42e34072589754fee2901ab0a5ab (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: Reply-Message = 'Hello bob' (7) eap_peap: EAP-Message = 0x010800331a0307002e533d33424641324344374138453246393746383631334334363638364344383043353243313241314333 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x417a42e34072589754fee2901ab0a5ab (7) eap_peap: Got tunneled Access-Challenge (7) eap: EAP session adding &reply:State = 0xc4f3e4bfc3fbfded (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) Sent Access-Challenge Id 55 from 172.21.7.175:1812 to 172.21.7.176:39389 length 149 (7) EAP-Message = 0x0108005b190017030100503fb24196a0b42341de69299e7ac47b885bd0d7a431cd227123005474b159fbed71797a5e932c2e6e359defd31dfae6ef02cf0ea1f22e2db4cc2fd26227421d32fb609c96af02056d68eb80abcc5e4322 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xc4f3e4bfc3fbfdedb35262d2c5aab0d9 (7) Finished request Waking up in 0.4 seconds. (8) Received Access-Request Id 56 from 172.21.7.176:46845 to 172.21.7.175:1812 length 302 (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) User-Name = 'bob' (8) State = 0xc4f3e4bfc3fbfdedb35262d2c5aab0d9 (8) NAS-Port-Id = 'wlan1' (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = '82000006' (8) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (8) Calling-Station-Id = '44-74-6C-CB-FE-1E' (8) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (8) EAP-Message = 0x020800501900170301002060eeb413ee721ea5802a17086ba98ce55bb9a97a4f18bd7382b78a43fa150579170301002090a2768752fb9c65a7067db34cda739259a4d91cd2565822b5064b8271673350 (8) Message-Authenticator = 0xecff140a8c31166a095b9055dc689b3e (8) NAS-Identifier = 'TestowyMT' (8) NAS-IP-Address = 172.21.7.176 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (!&User-Name) { (8) if (!&User-Name) -> FALSE (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@.*@/ ) { (8) if (&User-Name =~ /@.*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent code Response (2) ID 8 length 80 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x417a42e340725897 (8) eap: Finished EAP session with state 0xc4f3e4bfc3fbfded (8) eap: Previous EAP request found for state 0xc4f3e4bfc3fbfded, released from the list (8) eap: Peer sent method PEAP (25) (8) eap: EAP PEAP (25) (8) eap: Calling eap_peap to process EAP data (8) eap_peap: processing EAP-TLS (8) eap_peap: eaptls_verify returned 7 (8) eap_peap: Done initial handshake (8) eap_peap: eaptls_process returned 7 (8) eap_peap: FR_TLS_OK (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP type MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020800061a03 (8) eap_peap: Setting User-Name to bob (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020800061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = 'bob' (8) eap_peap: State = 0x417a42e34072589754fee2901ab0a5ab (8) Virtual server received request (8) EAP-Message = 0x020800061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = 'bob' (8) State = 0x417a42e34072589754fee2901ab0a5ab (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (8) authorize { (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := 'LOCAL' (8) } # update control = noop (8) eap: Peer sent code Response (2) ID 8 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files: users: Matched entry bob at line 56 (8) [files] = ok (8) [expiration] = noop (8) [logintime] = noop (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (8) Found Auth-Type = EAP (8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x417a42e340725897 (8) eap: Finished EAP session with state 0x417a42e340725897 (8) eap: Previous EAP request found for state 0x417a42e340725897, released from the list (8) eap: Peer sent method MSCHAPv2 (26) (8) eap: EAP MSCHAPv2 (26) (8) eap: Calling eap_mschapv2 to process EAP data (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (8) post-auth { ... } # empty sub-section is ignored (8) } # server inner-tunnel (8) Virtual server sending reply (8) Reply-Message = 'Hello bob' (8) MS-MPPE-Encryption-Policy = Encryption-Allowed (8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) MS-MPPE-Send-Key = 0x392845732ba58bc020b95f449b8a46b3 (8) MS-MPPE-Recv-Key = 0x746cab3622d7cd113228b9062486e26d (8) EAP-Message = 0x03080004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = 'bob' (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: Reply-Message = 'Hello bob' (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x392845732ba58bc020b95f449b8a46b3 (8) eap_peap: MS-MPPE-Recv-Key = 0x746cab3622d7cd113228b9062486e26d (8) eap_peap: EAP-Message = 0x03080004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = 'bob' (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: Reply-Message = 'Hello bob' (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x392845732ba58bc020b95f449b8a46b3 (8) eap_peap: MS-MPPE-Recv-Key = 0x746cab3622d7cd113228b9062486e26d (8) eap_peap: EAP-Message = 0x03080004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = 'bob' (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap: EAP session adding &reply:State = 0xc4f3e4bfccfafded (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) Sent Access-Challenge Id 56 from 172.21.7.175:1812 to 172.21.7.176:46845 length 101 (8) EAP-Message = 0x0109002b19001703010020ed0b59fd029f430c0cc5c027a628ab6684e1de0b3b45c022d7e0cfc6af831626 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xc4f3e4bfccfafdedb35262d2c5aab0d9 (8) Finished request Waking up in 0.4 seconds. (9) Received Access-Request Id 57 from 172.21.7.176:60330 to 172.21.7.175:1812 length 302 (9) Service-Type = Framed-User (9) Framed-MTU = 1400 (9) User-Name = 'bob' (9) State = 0xc4f3e4bfccfafdedb35262d2c5aab0d9 (9) NAS-Port-Id = 'wlan1' (9) NAS-Port-Type = Wireless-802.11 (9) Acct-Session-Id = '82000006' (9) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (9) Calling-Station-Id = '44-74-6C-CB-FE-1E' (9) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (9) EAP-Message = 0x0209005019001703010020278cd1d8ac7bf5750cd93ddd81d3d056797dd3b238067805a259804788144bba1703010020c054d0df79af2d6e999abb6b54b5257643676501fbe27e88a53ab6cc420b2a55 (9) Message-Authenticator = 0xce89d4ac76e87606f41cc2cbea3be379 (9) NAS-Identifier = 'TestowyMT' (9) NAS-IP-Address = 172.21.7.176 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (!&User-Name) { (9) if (!&User-Name) -> FALSE (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@.*@/ ) { (9) if (&User-Name =~ /@.*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "bob", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent code Response (2) ID 9 length 80 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = EAP (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xc4f3e4bfccfafded (9) eap: Finished EAP session with state 0xc4f3e4bfccfafded (9) eap: Previous EAP request found for state 0xc4f3e4bfccfafded, released from the list (9) eap: Peer sent method PEAP (25) (9) eap: EAP PEAP (25) (9) eap: Calling eap_peap to process EAP data (9) eap_peap: processing EAP-TLS (9) eap_peap: eaptls_verify returned 7 (9) eap_peap: Done initial handshake (9) eap_peap: eaptls_process returned 7 (9) eap_peap: FR_TLS_OK (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Success (9) eap_peap: No information to cache: session caching will be disabled for session 88047a7836777c91caec026c2987818176f396d62108680d7be0ec280ce6a955 SSL: Removing session 88047a7836777c91caec026c2987818176f396d62108680d7be0ec280ce6a955 from the cache (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (9) post-auth { (9) update { (9) No attributes updated (9) } # update = noop (9) [exec] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # post-auth = noop (9) Sent Access-Accept Id 57 from 172.21.7.175:1812 to 172.21.7.176:60330 length 165 (9) MS-MPPE-Recv-Key = 0xb9a80a16e33bfa56255cc45926a3afb71049b04b65612db3dc81b228fc2d8caf (9) MS-MPPE-Send-Key = 0x5d015cad6056016965c40b04d7ea49dfbab33b9c481022b6c9192cdb87c50a71 (9) EAP-Message = 0x03090004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name = 'bob' (9) Finished request Waking up in 0.4 seconds. (10) Received Accounting-Request Id 58 from 172.21.7.176:57439 to 172.21.7.175:1813 length 196 (10) Service-Type = Framed-User (10) NAS-Port-Id = 'wlan1' (10) NAS-Port-Type = Wireless-802.11 (10) User-Name = 'bob' (10) Acct-Session-Id = '82000006' (10) Acct-Multi-Session-Id = '00-02-6F-46-BD-CE-44-74-6C-CB-FE-1E-82-00-00-00-00-00-00-03' (10) Calling-Station-Id = '44-74-6C-CB-FE-1E' (10) Called-Station-Id = '00-02-6F-46-BD-CE:Tescior' (10) Acct-Authentic = RADIUS (10) Acct-Status-Type = Start (10) NAS-Identifier = 'TestowyMT' (10) Acct-Delay-Time = 0 (10) NAS-IP-Address = 172.21.7.176 (10) # Executing section preacct from file /etc/freeradius/sites-enabled/default (10) preacct { (10) [preprocess] = ok (10) policy acct_unique { (10) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) { (10) EXPAND %{string:Class} (10) --> (10) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE (10) else { (10) update request { (10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (10) --> be69e6f225273d282cbd87711747ad0d (10) &Acct-Unique-Session-Id := "be69e6f225273d282cbd87711747ad0d" (10) } # update request = noop (10) } # else = noop (10) } # policy acct_unique = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "bob", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) [files] = noop (10) } # preacct = ok (10) # Executing section accounting from file /etc/freeradius/sites-enabled/default (10) accounting { (10) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (10) detail: --> /var/log/freeradius/radacct/172.21.7.176/detail-20150327 (10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/172.21.7.176/detail-20150327 (10) detail: EXPAND %t (10) detail: --> Fri Mar 27 10:03:40 2015 (10) [detail] = ok (10) [unix] = ok (10) [exec] = noop (10) attr_filter.accounting_response: EXPAND %{User-Name} (10) attr_filter.accounting_response: --> bob (10) attr_filter.accounting_response: Matched entry DEFAULT at line 15 (10) [attr_filter.accounting_response] = updated (10) } # accounting = updated (10) Sent Accounting-Response Id 58 from 172.21.7.175:1813 to 172.21.7.176:57439 length 20 (10) Finished request Waking up in 0.4 seconds. (10) <done>: Cleaning up request packet ID 58 with timestamp +31 Waking up in 4.0 seconds. (0) <done>: Cleaning up request packet ID 48 with timestamp +30 (1) <done>: Cleaning up request packet ID 49 with timestamp +30 (2) <done>: Cleaning up request packet ID 50 with timestamp +31 (3) <done>: Cleaning up request packet ID 51 with timestamp +31 (4) <done>: Cleaning up request packet ID 52 with timestamp +31 (5) <done>: Cleaning up request packet ID 53 with timestamp +31 (6) <done>: Cleaning up request packet ID 54 with timestamp +31 (7) <done>: Cleaning up request packet ID 55 with timestamp +31 (8) <done>: Cleaning up request packet ID 56 with timestamp +31 (9) <done>: Cleaning up request packet ID 57 with timestamp +31 Ready to process requests #v- Warnings: (6) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. Should I worry about it? Freeradius config is defalult, like OutOfBox -- Best Regards Nicram
2015-03-27 10:14 GMT+01:00 Marcin <marcin@nicram.net>:
(8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request.
About proxy, it turned out that i hashed and disabled proxy :/ with peap, it is wise to use tunneled request and copy_request to tunnel? peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no }
On Fri, Mar 27, 2015 at 10:47:31AM +0100, Marcin wrote:
with peap, it is wise to use tunneled request and copy_request to tunnel?
Setting "copy_request_to_tunnel = yes" is usually useful, but it depends on your own situation. Matthew -- Matthew Newton, Ph.D. <mcn4@le.ac.uk> Systems Specialist, Infrastructure Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom For IT help contact helpdesk extn. 2253, <ithelp@le.ac.uk>
On Fri, Mar 27, 2015 at 10:14:16AM +0100, Marcin wrote:
(6) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request.
Should I worry about it?
No. If you really want to get rid of them and aren't doing proxying or using PAP you can comment out 'suffix' and 'pap' from the authorize section. But I wouldn't worry about it; it will only confuse you later on when you try and use one of those and it doesn't work. Matthew -- Matthew Newton, Ph.D. <mcn4@le.ac.uk> Systems Specialist, Infrastructure Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom For IT help contact helpdesk extn. 2253, <ithelp@le.ac.uk>
ok, thanks 2015-03-27 11:43 GMT+01:00 Matthew Newton <mcn4@leicester.ac.uk>:
On Fri, Mar 27, 2015 at 10:14:16AM +0100, Marcin wrote:
(6) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request.
Should I worry about it?
No.
If you really want to get rid of them and aren't doing proxying or using PAP you can comment out 'suffix' and 'pap' from the authorize section. But I wouldn't worry about it; it will only confuse you later on when you try and use one of those and it doesn't work.
Matthew
-- Matthew Newton, Ph.D. <mcn4@le.ac.uk>
Systems Specialist, Infrastructure Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom
For IT help contact helpdesk extn. 2253, <ithelp@le.ac.uk> - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Pozdrawiam Marcin / nicraM
In config i have such condition: if (Framed-Protocol == "PPP") { linelog } in log i have ERROR: Failed retrieving values required do evaluate condition. how to get rid of this 2015-03-27 11:43 GMT+01:00 Matthew Newton <mcn4@leicester.ac.uk>:
On Fri, Mar 27, 2015 at 10:14:16AM +0100, Marcin wrote:
(6) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request.
Should I worry about it?
No.
If you really want to get rid of them and aren't doing proxying or using PAP you can comment out 'suffix' and 'pap' from the authorize section. But I wouldn't worry about it; it will only confuse you later on when you try and use one of those and it doesn't work.
Matthew
-- Matthew Newton, Ph.D. <mcn4@le.ac.uk>
Systems Specialist, Infrastructure Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom
For IT help contact helpdesk extn. 2253, <ithelp@le.ac.uk> - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Pozdrawiam Marcin / nicraM
participants (2)
-
Marcin -
Matthew Newton