Require NAS dependant radius return attributes

Ben Thompson bt4 at
Tue Aug 16 17:15:15 CEST 2005


I have a problem which I want to find out if I can solve using

I am setting up an 802.1x based network where I want to use RADIUS
assigned VLAN's. I have succesfully tested this with Cisco wireless
access point's and FreeRADIUS 1.0.1 using a users file like this :-


test3999        NT-Password := "35C8397B2320E568467904861A2AF40F"
        Tunnel-Private-Group-ID:1 = 3999,
        Fall-Through = Yes

test4025       NT-Password := "35C8397B2320E568467904861A2AF40F"
        Tunnel-Private-Group-ID:1 = 4025,
        Fall-Through = Yes

        Tunnel-Type:1 = VLAN,
        Tunnel-Medium-Type:1 = IEEE-802


The trouble is I need to assign different VLAN's to users depending
which access point they connect from. What I would like to know is if it
is possible to use Huntgroups to look up the VLAN id based on something
like the IP address of the access point?

Let's say I have two access points called AP1 and AP2. If a user
connects to AP1, I want the RADIUS server to look up from somewhere what
is the correct VLAN to assign to people using AP1 and return the correct
attributes to suit. If the same user connects to AP2 I want the VLAN id
to be the correct one for AP2 which may be different to AP1.

Any advice would be appreciated,

Ben Thompson


More information about the Freeradius-Users mailing list