XP auth + PEAP (debik)

[xav guerin]

It's in radius in module configuration for mschap (just before ldap
module), but your config is correct from this point of view (it's
commented out).
Did you try EAP-Type := PEAP in the users file ?

2005/12/6, mat yuh <yusshalimee at yahoo.com>:
> here is my radiusd.conf
>
> --- xav guerin <xavtoo at gmail.com> wrote:
>
> > If you use users file with a User-Password, you
> > don't have to use ntlm
> > in MSCHAP config because it's only here to deal with
> > a Windows domain
> > Controller.
> >
> > 2005/12/6, mat yuh <yusshalimee at yahoo.com>:
> >
> > > rlm_mschap: FAILED: No NT/LM-Password.  Cannot
> > perform
> > > authentication.
> > > ....
> > > i do
> > > configure default_eap_type = peap in eap.conf and
> > have
> > > a plain text password in users file :
> > >
> > > nurah User-Password == "mypasswd"
> >
> > Here is another problem :
> > You're trying  to use a user cert, setting EAP-Type
> > to PEAP in users
> > may solves it.
> >
> > HTH
> >
> > > rlm_eap_tls:  Length Included
> > >   eaptls_verify returned 11
> > >     (other): before/accept initialization
> > >     TLS_accept: before/accept initialization
> > >   rlm_eap_tls: <<< TLS 1.0 Handshake [length
> > 0032],
> > > ClientHello
> > >     TLS_accept: SSLv3 read client hello A
> > >   rlm_eap_tls: >>> TLS 1.0 Handshake [length
> > 004a],
> > > ServerHello
> > >     TLS_accept: SSLv3 write server hello A
> > >   rlm_eap_tls: >>> TLS 1.0 Handshake [length
> > 06cc],
> > > Certificate
> > >     TLS_accept: SSLv3 write certificate A
> > >   rlm_eap_tls: >>> TLS 1.0 Handshake [length
> > 0004],
> > > ServerHelloDone
> > >     TLS_accept: SSLv3 write server done A
> > >     TLS_accept: SSLv3 flush data
> > >     TLS_accept:error in SSLv3 read client
> > certificate
> > > A
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
>
>
>
> __________________________________________
> Yahoo! DSL – Something to write home about.
> Just $16.99/mo. or less.
> dsl.yahoo.com
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
>