XP auth + PEAP (debik)

[mat yuh]

i put this in users file but still failed.. same
problem " rlm_mschap: FAILED: No NT/LM-Password".


nurah    EAP-Type == PEAP,User-Password=="mypasswd"


--- xav guerin <xavtoo at gmail.com> wrote:

> It's in radius in module configuration for mschap
> (just before ldap
> module), but your config is correct from this point
> of view (it's
> commented out).
> Did you try EAP-Type := PEAP in the users file ?
> 
> 2005/12/6, mat yuh <yusshalimee at yahoo.com>:
> > here is my radiusd.conf
> >
> > --- xav guerin <xavtoo at gmail.com> wrote:
> >
> > > If you use users file with a User-Password, you
> > > don't have to use ntlm
> > > in MSCHAP config because it's only here to deal
> with
> > > a Windows domain
> > > Controller.
> > >
> > > 2005/12/6, mat yuh <yusshalimee at yahoo.com>:
> > >
> > > > rlm_mschap: FAILED: No NT/LM-Password.  Cannot
> > > perform
> > > > authentication.
> > > > ....
> > > > i do
> > > > configure default_eap_type = peap in eap.conf
> and
> > > have
> > > > a plain text password in users file :
> > > >
> > > > nurah User-Password == "mypasswd"
> > >
> > > Here is another problem :
> > > You're trying  to use a user cert, setting
> EAP-Type
> > > to PEAP in users
> > > may solves it.
> > >
> > > HTH
> > >
> > > > rlm_eap_tls:  Length Included
> > > >   eaptls_verify returned 11
> > > >     (other): before/accept initialization
> > > >     TLS_accept: before/accept initialization
> > > >   rlm_eap_tls: <<< TLS 1.0 Handshake [length
> > > 0032],
> > > > ClientHello
> > > >     TLS_accept: SSLv3 read client hello A
> > > >   rlm_eap_tls: >>> TLS 1.0 Handshake [length
> > > 004a],
> > > > ServerHello
> > > >     TLS_accept: SSLv3 write server hello A
> > > >   rlm_eap_tls: >>> TLS 1.0 Handshake [length
> > > 06cc],
> > > > Certificate
> > > >     TLS_accept: SSLv3 write certificate A
> > > >   rlm_eap_tls: >>> TLS 1.0 Handshake [length
> > > 0004],
> > > > ServerHelloDone
> > > >     TLS_accept: SSLv3 write server done A
> > > >     TLS_accept: SSLv3 flush data
> > > >     TLS_accept:error in SSLv3 read client
> > > certificate
> > > > A
> > >
> > > -
> > > List info/subscribe/unsubscribe? See
> > > http://www.freeradius.org/list/users.html
> > >
> >
> >
> >
> > __________________________________________
> > Yahoo! DSL – Something to write home about.
> > Just $16.99/mo. or less.
> > dsl.yahoo.com
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> >
> >
> >
> 
> - 
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> 



		
__________________________________________ 
Yahoo! DSL – Something to write home about. 
Just $16.99/mo. or less. 
dsl.yahoo.com