Traffic does not pass trought AP1300

Sergey Velikanov vgray at bk.ru
Mon Jul 4 13:18:58 CEST 2005


I setup my Radius as described at 
http://web.archive.org/web/20031206113912/http://www.alphacore.net/spipen/article.php3?id_article=2

My Windows XP SP2 successful Authenticate using EAP-TLS, in radius log i 
see

Sending Access-Accept of id 39 to 192.168.10.100:1645
         MS-MPPE-Recv-Key = 
0xefc02ac383a3a2faddaad9a7aea6cdab9cfe5a2a8ab6523225b11a321da469f9
         MS-MPPE-Send-Key = 
0x3d64ab1c9fe9f3aaf81115320f7e1253561415ee882671dda23cbd9181b1c6c1
         EAP-Message = 0x03070004
         Message-Authenticator = 0x00000000000000000000000000000000
         User-Name = "Sergey Velikanov"

Everything works fine, but from my Windows I can ping nothing

I use Cisco AP1300 as AP, and when I type

bridge#show dot11 associations 0060.1d1e.245c

bridge#show dot11 associations 0060.1d1e.245c
Address           : 0060.1d1e.245c     Name             : NONE
IP Address        : 0.0.0.0            Interface        : Dot11Radio 0
Device            : unknown            Software Version : NONE
CCX Version       : NONE

State             : EAP-Assoc          Parent           : self 

SSID              : protected          VLAN             : 0
Hops to Infra     : 1                  Association Id   : 84
Clients Associated: 0                  Repeaters associated: 0
Tunnel Address    : 0.0.0.0
Key Mgmt type     : NONE               Encryption       : WEP
Current Rate      : 11.0               Capability       :
Supported Rates   : 1.0 2.0 5.5 11.0
Signal Strength   : -48  dBm           Connected for    : 19 seconds
Signal Quality    : N/A                Activity Timeout : 59 seconds
Power-save        : Off                Last Activity    : 1 seconds ago

Packets Input     : 56                 Packets Output   : 16
Bytes Input       : 6723               Bytes Output     : 3108
Duplicates Rcvd   : 0                  Data Retries     : 0
 >Decrypt Failed    : 45                 RTS Retries      : 0
MIC Failed        : 0                  MIC Missing      : 0
Packets Redirected: 0                  Redirect Filtered: 0


it seems that all traffic rejected by AP1300m why? Is it Radius, Cisco 
or my old orinoco card(I've bought it about 4 years ago)

also in cisco's log I see
*Mar  1 05:08:00.483: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 
0060.1d1e.245c Associated KEY_MGMT[NONE]

Is it normal that KEY_MGMT = NONE ?

PS: This is my AP1300 config

bridge#sh run int dot11Radio 0
Building configuration...

Current configuration : 423 bytes
!
interface Dot11Radio0
  no ip address
  no ip route-cache
  !
  encryption mode wep mandatory
  !
  ssid protected
     authentication open eap eap_methods
     authentication network-eap eap_methods
     guest-mode
  !
  short-slot-time
  concatenation
  speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 
36.0 48.0 54.0
  rts threshold 4000
  station-role root ap-only
  infrastructure-client
  bridge-group 1
end



More information about the Freeradius-Users mailing list