Aruba-Switch_NAS-Problem

[alfonso celestino]

[GD] Looks to me like you didn't configure 10.1.2.254 as a valid client of the RADIUS server.  Look in clients.conf.
 
Rgds,
 
Guy 
 
ok, that was the problem, but now, I have another one
 
I am grateful very much for their amiability.
 
here´s debug:
 
.......
rad_recv: Access-Request packet from host 10.1.2.254:32773, id=13, length=113
        User-Name = "alfonso"
        NAS-IP-Address = 132.247.5.254
        NAS-Port = 1
        NAS-Port-Type = Wireless-802.11
        Calling-Station-Id = "0050FCBE29C0"
        Called-Station-Id = "000B86505910"
        Framed-MTU = 1100
        EAP-Message = 0x0201000c01616c666f6e736f
        Message-Authenticator = 0x806e47c0179e08ad4106ba47b7bc66b1
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
  modcall[authorize]: module "preprocess" returns ok for request 8
  modcall[authorize]: module "chap" returns noop for request 8
  modcall[authorize]: module "mschap" returns noop for request 8
    rlm_realm: No '@' in User-Name = "alfonso", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 8
  rlm_eap: EAP packet type response id 1 length 12
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 8
    users: Matched entry alfonso at line 102
  modcall[authorize]: module "files" returns ok for request 8
modcall: group authorize returns updated for request 8
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 8
modcall: group authenticate returns handled for request 8
Sending Access-Challenge of id 13 to 10.1.2.254:32773
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x590689686fe613d42e824e58b76401ae
Finished request 8
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.1.2.254:32773, id=13, length=113
Sending duplicate reply to client aruba-wpa:32773 - ID: 13
Re-sending Access-Challenge of id 13 to 10.1.2.254:32773
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 8 ID 13 with timestamp 42d533e2
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 10.1.2.254:32773, id=13, length=113
        User-Name = "alfonso"
        NAS-IP-Address = 132.247.5.254
        NAS-Port = 1
        NAS-Port-Type = Wireless-802.11
        Calling-Station-Id = "0050FCBE29C0"
        Called-Station-Id = "000B86505910"
        Framed-MTU = 1100
        EAP-Message = 0x0201000c01616c666f6e736f
        Message-Authenticator = 0x806e47c0179e08ad4106ba47b7bc66b1
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 9
  modcall[authorize]: module "preprocess" returns ok for request 9
  modcall[authorize]: module "chap" returns noop for request 9
  modcall[authorize]: module "mschap" returns noop for request 9
    rlm_realm: No '@' in User-Name = "alfonso", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 9
  rlm_eap: EAP packet type response id 1 length 12
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 9
    users: Matched entry alfonso at line 102
  modcall[authorize]: module "files" returns ok for request 9
modcall: group authorize returns updated for request 9
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 9
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 9
modcall: group authenticate returns handled for request 9
Sending Access-Challenge of id 13 to 10.1.2.254:32773
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xac2466bb99dfc47869c9e09a7903e6e2
Finished request 9
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.1.2.254:32773, id=13, length=113
Sending duplicate reply to client aruba-wpa:32773 - ID: 13
Re-sending Access-Challenge of id 13 to 10.1.2.254:32773
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 9 ID 13 with timestamp 42d533ec
Nothing to do.  Sleeping until we see a request.



		
---------------------------------
  Do You Yahoo!? La mejor conexión a Internet y 2GB extra a tu correo por $100 al mes. http://net.yahoo.com.mx 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20050713/19bc2f35/attachment.html>