Restricting Access by Group Membership

[jp at joshmp.com]

Setup:
FreeRADIUS 1.0.4 on FreeBSD 4.11 authenticating to eDirectory on Netware 6.5 server.

Issue:
I have read the FAQ section regaring limiting access to specific groups
(http://freeradius.org/faq/#5.2), but I can't get it to work.  For one, I am not
entirely certain where to add the lines.  I have tried using the users file, but
this doesn't seem to work.  Two, I am not sure that I am using the right syntax.
 Here is what I have tried:

- adding the following lines to users file:

----snip-----
DEFAULT Group == "cn=remoteusers,o=services", Auth-Type := Reject
        Reply-Message = "Your account has been disabled"

DEFAULT Auth-Type = LDAP
-----snip-----


Here is the debug:

-----snip-----
episd44# /usr/local/sbin/radiusd -X
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/var"
 main: logdir = "/var/log"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/var/log/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded LDAP
 ldap: server = "10.254.8.25"
 ldap: port = 389
 ldap: net_timeout = 20
 ldap: timeout = 20
 ldap: timelimit = 20
 ldap: identity = "cn=raduser,o=services"
 ldap: tls_mode = no
 ldap: start_tls = no
 ldap: tls_cacertfile = "(null)"
 ldap: tls_cacertdir = "(null)"
 ldap: tls_certfile = "(null)"
 ldap: tls_keyfile = "(null)"
 ldap: tls_randfile = "(null)"
 ldap: tls_require_cert = "allow"
 ldap: password = "secretrad"
 ldap: basedn = "o=services"
 ldap: filter = "(cn=%{Stripped-User-Name:-%{User-Name}})"
 ldap: base_filter = "(objectclass=radiusprofile)"
 ldap: default_profile = "(null)"
 ldap: profile_attribute = "(null)"
 ldap: password_header = "(null)"
 ldap: password_attribute = "userPassword"
 ldap: access_attr = "(null)"
 ldap: groupname_attribute = "cn"
 ldap: groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
 ldap: groupmembership_attribute = "(null)"
 ldap: dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap"
 ldap: ldap_debug = 0
 ldap: ldap_connections_number = 5
 ldap: compare_check_items = no
 ldap: access_attr_used_for_allow = yes
 ldap: do_xlat = yes
 ldap: edir_account_policy_check = no
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
conns: 0x808b400
Module: Instantiated ldap (ldap)
Module: Loaded preprocess
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded files
 files: usersfile = "/usr/local/etc/raddb/users"
 files: acctusersfile = "/usr/local/etc/raddb/acct_users"
 files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded detail
 detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded radutmp
 radutmp: filename = "/var/log/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:2254, id=53, length=60
        User-Name = "dcitest1"
        User-Password = "dcitest1"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 10
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
rlm_ldap: Entering ldap_groupcmp()
radius_xlat:  'o=services'
radius_xlat:  '(cn=dcitest1)'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to 10.254.8.25:389, authentication 0
rlm_ldap: bind as cn=raduser,o=services/secretrad to 10.254.8.25:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in o=services, with filter (cn=dcitest1)
rlm_ldap: ldap_release_conn: Release Id: 0
radius_xlat: 
'(|(&(objectClass=GroupOfNames)(member=cn=dcitest1,ou=GW,o=Services))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=dcitest1,ou=GW,o=Services)))'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=remoteusers,o=services, with filter
(|(&(objectClass=GroupOfNames)(member=cn=dcitest1,ou=GW,o=Services))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=dcitest1,ou=GW,o=Services)))
rlm_ldap: object not found or got ambiguous search result
rlm_ldap: ldap_release_conn: Release Id: 0
rlm_ldap::ldap_groupcmp: Group cn=remoteusers,o=services not found or user is
not a member.
    users: Matched entry DEFAULT at line 155
  modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
  rad_check_password:  Found Auth-Type LDAP
auth: type "LDAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 0
rlm_ldap: - authenticate
rlm_ldap: login attempt by "dcitest1" with password "dcitest1"
rlm_ldap: user DN: cn=dcitest1,ou=GW,o=Services
rlm_ldap: (re)connect to 10.254.8.25:389, authentication 1
rlm_ldap: bind as cn=dcitest1,ou=GW,o=Services/dcitest1 to 10.254.8.25:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: user dcitest1 authenticated succesfully
  modcall[authenticate]: module "ldap" returns ok for request 0
modcall: group Auth-Type returns ok for request 0
Sending Access-Accept of id 53 to 127.0.0.1:2254
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 53 with timestamp 42de3bed
Nothing to do.  Sleeping until we see a request.
-----snip-----


Thanks in advance,

Josh