rlm_ldap: Attribute "User-Password" isrequired forauthentication

[Vladimir Vuksan]

melvin wrote:

> rad_recv: Access-Request packet from host 192.168.84.11:2048, id=0, 
> length=125
>        User-Name = "melvin"
>        NAS-IP-Address = 192.168.84.11
>        Called-Station-Id = "000f66005feb"
>        Calling-Station-Id = "0012f075e7b3"
>        NAS-Identifier = "000f66005feb"
>        NAS-Port = 33
>        Framed-MTU = 1400
>        NAS-Port-Type = Wireless-802.11
>        EAP-Message = 0x0201000b016d656c76696e
>        Message-Authenticator = 0x1cbf370b745f6863e6478bfed57edd74
>  Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
>  modcall[authorize]: module "preprocess" returns ok for request 0
>  modcall[authorize]: module "chap" returns noop for request 0
>  modcall[authorize]: module "mschap" returns noop for request 0
>    rlm_realm: No '@' in User-Name = "melvin", looking up realm NULL
>    rlm_realm: No such realm "NULL"
>  modcall[authorize]: module "suffix" returns noop for request 0
>  rlm_eap: EAP packet type response id 1 length 11
>  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>  modcall[authorize]: module "eap" returns updated for request 0
>    users: Matched entry DEFAULT at line 152
>  modcall[authorize]: module "files" returns ok for request 0
> modcall: group authorize returns updated for request 0
>  rad_check_password:  Found Auth-Type LDAP
> auth: type "LDAP"
>  Processing the authenticate section of radiusd.conf
> modcall: entering group Auth-Type for request 0
> rlm_ldap: - authenticate
> rlm_ldap: Attribute "User-Password" is required for authentication.
>  modcall[authenticate]: module "ldap" returns invalid for request 0
> modcall: group Auth-Type returns invalid for request 0
> auth: Failed to validate the user.
>
> Any ideas where I might go wrong?


You are setting the default Auth-Type to LDAP which is screwing things 
up. Try removing that entry out the users file.