[Fwd: rlm_passwd & realms]

[Edgars]

ok, thanks for the tip.
Now receiving the following in debug screen (something with Auth-Type, 
but can't figure out what exactly):

1)with PAP
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: Looking up realm "mt" for User-Name = "edgars at mt"
    rlm_realm: Found realm "mt"
    rlm_realm: Adding Stripped-User-Name = "edgars"
    rlm_realm: Proxying request from user edgars to realm mt
    rlm_realm: Adding Realm = "mt"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
rlm_passwd: Added Autz-Type: 'mt' to config_items
rlm_passwd: Added NAS-IP-Address: '10.5.8.103' to request_items
  modcall[authorize]: module "edg_check" returns ok for request 0
modcall: group authorize returns ok for request 0
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: Request already proxied.  Ignoring.
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
rlm_passwd: Added Autz-Type: 'mt' to config_items
rlm_passwd: Added NAS-IP-Address: '10.5.8.103' to request_items
  modcall[authorize]: module "edg_check" returns ok for request 0
modcall: group authorize returns ok for request 0
auth: No authenticate method (Auth-Type) configuration found for the 
request: Rejecting the user
auth: Failed to validate the user.
Login incorrect: [edgars/edgars] (from client lalala port 2436 cli 1.1.1.2)

2)with mschap
rad_check_password:  Found Auth-Type MS-CHAP
auth: type "MS-CHAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 0
  rlm_mschap: No User-Password configured.  Cannot create LM-Password.
  rlm_mschap: No User-Password configured.  Cannot create NT-Password.
  rlm_mschap: Told to do MS-CHAPv2 for edg at mt with NT-Password
  rlm_mschap: FAILED: No NT/LM-Password.  Cannot perform authentication.
  rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
  modcall[authenticate]: module "mschap" returns reject for request 0
modcall: group Auth-Type returns reject for request 0
auth: Failed to validate the user.
Login incorrect: [edg/<no User-Password attribute>] (from client lalala 
port 2437 cli 1.1.1.2)


Edgars



Alan DeKok wrote:

>Edgars <edzix19 at inbox.lv> wrote:
>  
>
>>Seems that somewhere is mistake caus' receiving in the debug screen the 
>>following information (pay attention to "rlm_passwd: *Unable to create 
>>Autz-Type: mt*". What could it mean?):
>>    
>>
>
>  You didn't list "mt" as a VALUE for Autz-Type in the dictionaries.
>
>  Alan DeKok.
>
>- 
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
>  
>