segmentation fault

[yuniva wati]

hello freeradius users, 
I have configure my freeradius for accounting but when
I run it using :

[root at localhost raddb]# /usr/local/radius/sbin/radiusd
-sfxxyz -l stdout
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file:
/usr/local/radius/etc/raddb/proxy.conf
Config:   including file:
/usr/local/radius/etc/raddb/clients.conf
Config:   including file:
/usr/local/radius/etc/raddb/snmp.conf
Config:   including file:
/usr/local/radius/etc/raddb/eap.conf
Config:   including file:
/usr/local/radius/etc/raddb/sql.conf
 main: prefix = "/usr/local/radius"
 main: localstatedir = "/usr/local/radius/var"
 main: logdir = "/usr/local/radius/var/log/radius"
 main: libdir = "/usr/local/radius/lib"
 main: radacctdir =
"/usr/local/radius/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 1812
 main: allow_core_dumps = no
 main: log_stripped_names = yes
 main: log_file =
"/usr/local/radius/var/log/radius/radius.log"
 main: log_auth = yes
 main: log_auth_badpass = yes
 main: log_auth_goodpass = yes
 main: pidfile =
"/usr/local/radius/var/run/radiusd/radiusd.pid"
 main: user = "nobody"
 main: group = "nobody"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/radius/sbin/checkrad"
 main: proxy_requests = no
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = yes
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will
go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/radius/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean
output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: authtype = "MS-CHAP"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp =
"/usr/local/radius/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "peap"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
 tls: rsa_key_exchange = no
 tls: dh_key_exchange = yes
 tls: rsa_key_length = 512
 tls: dh_key_length = 512
 tls: verify_depth = 0
 tls: CA_path = "(null)"
 tls: pem_file_type = yes
 tls: private_key_file =
"/usr/local/radius/etc/raddb/certs/cert-srv.pem"
 tls: certificate_file =
"/usr/local/radius/etc/raddb/certs/cert-srv.pem"
 tls: CA_file =
"/usr/local/radius/etc/raddb/certs/root.pem"
 tls: private_key_password = "telkom"
 tls: dh_file = "/usr/local/radius/etc/raddb/certs/dh"
 tls: random_file =
"/usr/local/radius/etc/raddb/certs/random"
 tls: fragment_size = 1024
 tls: include_length = yes
 tls: check_crl = no
 tls: check_cert_cn = "(null)"
rlm_eap: Loaded and initialized type tls
 peap: default_eap_type = "mschapv2"
 peap: copy_request_to_tunnel = no
 peap: use_tunneled_reply = no
 peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups =
"/usr/local/radius/etc/raddb/huntgroups"
 preprocess: hints =
"/usr/local/radius/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
 files: usersfile =
"/usr/local/radius/etc/raddb/users"
 files: acctusersfile =
"/usr/local/radius/etc/raddb/acct_users"
 files: preproxy_usersfile =
"/usr/local/radius/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded SQL
 sql: driver =
"src/radiusd/src/modules/rlm_sql/drivers/rlm_sql_mysql"
 sql: server = "localhost"
 sql: port = "3306"
 sql: login = "root"
 sql: password = "telkom"
 sql: radius_db = "radius"
 sql: acct_table = "radacct"
 sql: acct_table2 = "radacct"
 sql: authcheck_table = "radcheck"
 sql: authreply_table = "radreply"
 sql: groupcheck_table = "radgroupcheck"
 sql: groupreply_table = "radgroupreply"
 sql: usergroup_table = "usergroup"
 sql: nas_table = "nas"
 sql: dict_table = "dictionary"
 sql: sqltrace = yes
 sql: sqltracefile =
"/usr/local/radius/var/log/radius/sqltrace.sql"
 sql: readclients = yes
 sql: deletestalesessions = yes
 sql: num_sql_socks = 5
 sql: sql_user_name = "%{User-Name}"
 sql: default_user_profile = ""
 sql: query_on_not_found = no
 sql: authorize_check_query = "SELECT
id,UserName,Attribute,Value,op FROM radcheck WHERE
Username = '%{SQL-User-Name}' ORDER BY id"
 sql: authorize_reply_query = "SELECT
id,UserName,Attribute,Value,op FROM radreply WHERE
Username = '%{SQL-User-Name}' ORDER BY id"
 sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
 FROM radgroupcheck,usergroup WHERE usergroup.Username
= '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupcheck.GroupName ORDER BY radgroupcheck.id"
 sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
 FROM radgroupreply,usergroup WHERE usergroup.Username
= '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupreply.GroupName ORDER BY radgroupreply.id"
 sql: accounting_onoff_query = "UPDATE radacct SET
AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') -
unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}',
AcctStopDelay = '%{Acct-Delay-Time}' WHERE
AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress=
'%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
 sql: accounting_update_query = "UPDATE radacct ? SET
FramedIPAddress = '%{Framed-IP-Address}', ?
AcctSessionTime = '%{Acct-Session-Time}', ?
AcctInputOctets = '%{Acct-Input-Octets}', ?
AcctOutputOctets = '%{Acct-Output-Octets}' ? WHERE
AcctSessionId = '%{Acct-Session-Id}' ? AND UserName =
'%{SQL-User-Name}' ? AND NASIPAddress=
'%{NAS-IP-Address}'"
 sql: accounting_update_query_alt = "INSERT into
radacct (AcctSessionId, AcctUniqueId, UserName, Realm,
NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctSessionTime, AcctAuthentic, ConnectInfo_start,
AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay)
values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-Use-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL
(%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0})
SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}',
'', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0')"
 sql: accounting_start_query = "INSERT into radacct
(AcctSessionId, AcctUniqueId, UserName, Realm,
NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId,
AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', '0', '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
 sql: accounting_start_query_alt = "UPDATE radacct SET
AcctStartTime = '%S', AcctStartDelay =
'%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId =
'%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
 sql: accounting_stop_query = "UPDATE radacct SET
AcctStopTime = '%S', AcctSessionTime =
'%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets =
'%{Acct-Output-Octets}', AcctTerminateCause =
'%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop =
'%{Connect-Info}' WHERE AcctSessionId =
'%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
 sql: accounting_stop_query_alt = "INSERT into radacct
(AcctSessionId, AcctUniqueId, UserName, Realm,
NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId,
AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL
(%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0})
SECOND), '%S', '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Connect-Info}',
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{Acct-Delay-Time}')"
 sql: group_membership_query = "SELECT GroupName FROM
usergroup WHERE UserName='%{SQL-User-Name}'"
 sql: connect_failure_retry_delay = 60
 sql: simul_count_query = "SELECT COUNT(*) FROM
radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
 sql: simul_verify_query = "SELECT RadAcctId,
AcctSessionId, UserName, NASIPAddress, NASPortId,
FramedIPAddress, CallingStationId, FramedProtocol FROM
radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
 sql: postauth_table = "radpostauth"
 sql: postauth_query = "INSERT into radpostauth (id,
user, pass, reply, date) values ('', '%{User-Name}',
'%{User-Password:-Chap-Password}',
'%{reply:Packet-Type}', NOW())"
 sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
segmentation fault

that I want ask is :
-Why I got that message and what part is wrong??
thanks for all of you.
I hope anyone can help me


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com