Freeradius make install error

Kenneth Grady klg at lanl.gov
Thu Jun 16 17:39:46 CEST 2005


You could change the src/main/Makefile.in then manually strip radwho and
radzap if you use them.

*** Makefile.in.-1.0.3.orig     Fri Jun 10 14:42:14 2005
--- Makefile.in Fri Jun 10 14:14:29 2005
***************
*** 145,152 ****
  
  install:
        $(LIBTOOL) --mode=install $(INSTALL) -m 755 $(INSTALLSTRIP)
radiusd$(EXEEXT)    $(R)$(sbindir)
!       $(INSTALL) -m 755 $(INSTALLSTRIP) radwho$(EXEEXT)      
$(R)$(bindir)
!       $(INSTALL) -m 755 $(INSTALLSTRIP) radzap        $(R)$(bindir)
        $(INSTALL) -m 755    radlast                    $(R)$(bindir)
        $(INSTALL) -m 755    radclient$(EXEEXT)         $(R)$(bindir)
        $(INSTALL) -m 755    radrelay$(EXEEXT)          $(R)$(bindir)
--- 145,152 ----
  
  install:
        $(LIBTOOL) --mode=install $(INSTALL) -m 755 $(INSTALLSTRIP)
radiusd$(EXEEXT)    $(R)$(sbindir)
!       $(INSTALL) -m 755 $(INSTALL) radwho$(EXEEXT)    $(R)$(bindir)
!       $(INSTALL) -m 755 $(INSTALL) radzap             $(R)$(bindir)
        $(INSTALL) -m 755    radlast                    $(R)$(bindir)
        $(INSTALL) -m 755    radclient$(EXEEXT)         $(R)$(bindir)
        $(INSTALL) -m 755    radrelay$(EXEEXT)          $(R)$(bindir)

On Wed, 2005-06-15 at 16:42, synackrst wrote:
> Ok… Thank you J
> 
>  
> 
> We have to wait for 1.0.4
> 
>  
> 
> Regards,
> 
> Paulo Leitao
> 
>  
> 
>                                    
> ______________________________________________________________________
> 
> From: freeradius-users-bounces at lists.freeradius.org
> [mailto:freeradius-users-bounces at lists.freeradius.org] On Behalf Of
> Carlos Martínez-Troncoso Cera
> Sent: quarta-feira, 15 de Junho de 2005 23:31
> To: FreeRadius users mailing list
> Subject: Re: Freeradius make install error
> 
> 
>  
> 
> I had the same error installing freeradius 1.0.3 in Linux and Solaris,
> I saw that this version has bugs for install, and tried with 1.0.2
> version and now everything is working, see the fixes for 1.0.3 and if
> none is for you, you can try with 1.0.2.
> Reggards,
> 
> 
> 
> Carlos Martínez-Troncoso Cera
> Coordinador de Servicios Internet/Intranet
> Universidad del Norte
> Barranquilla, Colombia
> Tel: 57 5 3509367
> 
> 
> 
> synackrst wrote: 
> 
> Hello, 
> 
>  
> 
> Any solution for this:
> 
>  
> 
> #make install
> 
> ...
> 
> ....
> 
> /usr/local/src/freeradius-1.0.3/install-sh -c -m 755 -s .libs/radiusd
> /usr/local/sbin/radiusd
> 
> /usr/local/src/freeradius-1.0.3/install-sh -c -m 755 -s radwho 
> /usr/local/bin
> 
> strip: /usr/local/bin/#inst.420#: File format not recognized
> 
> make[4]: *** [install] Error 1
> 
> make[4]: Leaving directory `/usr/local/src/freeradius-1.0.3/src/main'
> 
> make[3]: *** [common] Error 2
> 
> make[3]: Leaving directory `/usr/local/src/freeradius-1.0.3/src'
> 
> make[2]: *** [install] Error 2
> 
> make[2]: Leaving directory `/usr/local/src/freeradius-1.0.3/src'
> 
> make[1]: *** [common] Error 2
> 
> make[1]: Leaving directory `/usr/local/src/freeradius-1.0.3'
> 
> make: *** [install] Error 2
> 
> #
> 
>  
> 
> 
> ______________________________________________________________________
> 
>  
> - 
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> 
> 
> 
> __________ NOD32 1.1141 (20050615) Information __________
> 
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
> 
> 
> 
> ______________________________________________________________________
> - 
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html




More information about the Freeradius-Users mailing list