Auth: Login incorrect: [user/<CHAP-Password>]

[Adil Azmi Bikarbass]

I really added the Auth-Type but with no sucess!

Adil

On Fri, 17 Jun 2005, Roberto Gonzalez Azevedo wrote:

> In 'users' :
>
> user   Auth-Type := Local, Password = "somepass",       Simultaneous-Use = 2, 
> Huntgroup-Name = "adsl-dialup"
>        Framed-Protocol = PPP,
>        Framed-IP-Address = 255.255.255.254,
>        NAS-Port-Type = Async,
>        Service-Type = Framed-User,
>
>
> -------------------------
> Roberto Gonzalez Azevedo
>
> Adil Azmi Bikarbass wrote:
>> Well i've tried the Auth-Type := Local and my radiusd.conf allows chap with 
>> the following syntax :
>> 
>> authenticate {
>>         Auth-Type PAP {
>>                 pap
>>         }
>>         Auth-Type CHAP {
>>                 chap
>>         }
>>         Auth-Type MS-CHAP {
>>                 mschap
>>         }
>>         unix
>> }
>> 
>> 
>> But with no success
>> 
>> Adil
>> 
>> On Fri, 17 Jun 2005, Jandre Olivier wrote:
>> 
>>> You are using chap authentication, what i recommend u can try is, 
>>> "Auth-Type := Local and also make sure your radiusd.conf allows chap 
>>> authentication
>>> 
>>> Hope it helps
>>> 
>>> Adil Azmi Bikarbass wrote:
>>> 
>>>> Dear FreeRadius list members,
>>>> 
>>>> I'm really stuck with an authentication problem here:
>>>> 
>>>> I'm getting the following error meesage anytime a user try to connect 
>>>> through my Freeradius server :
>>>> 
>>>> Auth: Login incorrect: [user/<CHAP-Password>] (from client MT2_ADSL port 
>>>> 1476461184)
>>>> Auth: rlm_unix: Attribute "User-Password" is required for authentication. 
>>>> Cannot use "CHAP-Password".
>>>> 
>>>> Here is the radius entry for that user:
>>>> 
>>>> user   Password = "somepass",       Simultaneous-Use = 2, 
>>>> Huntgroup-Name = "adsl-dialup"
>>>>         Framed-Protocol = PPP,
>>>>         Framed-IP-Address = 255.255.255.254,
>>>>         NAS-Port-Type = Async,
>>>>         Service-Type = Framed-User,
>>>> 
>>>> The Huntgroup-name : adsl-dialup is to specify the IP addresses of all 
>>>> the remote access servers we use
>>>> 
>>>> Once i add the following line at the bottom of my users file the user get 
>>>> connected with no problem:
>>>> 
>>>> DEFAULT Auth-Type := Accept
>>>> 
>>>> Please advise what could be the problem
>>>> 
>>>> Thanks in advance
>>>> 
>>>> Adil
>>>> 
>>>> 
>>>> 
>>>> 
>>> 
>>> 
>> 
>
>
> - List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html
>

-- 
|-Adil Azmi Bikarbass
|-IT Manager, MTDS
|-tel +212.3.767.4861
|-fax +212.3.767.4863
|-gsm +212.6.139. 4541
|-14, rue 16 novembre
|-Rabat, Kingdom of Morocco