Auth: Login incorrect: [user/<CHAP-Password>]

[Roberto Gonzalez Azevedo]

In 'users' :

user   Auth-Type := Local, Password = "somepass",       Simultaneous-Use 
= 2,   Huntgroup-Name = "adsl-dialup"
         Framed-Protocol = PPP,
         Framed-IP-Address = 255.255.255.254,
         NAS-Port-Type = Async,
         Service-Type = Framed-User,


-------------------------
Roberto Gonzalez Azevedo

Adil Azmi Bikarbass wrote:
> Well i've tried the Auth-Type := Local and my radiusd.conf allows chap 
> with the following syntax :
> 
> authenticate {
>         Auth-Type PAP {
>                 pap
>         }
>         Auth-Type CHAP {
>                 chap
>         }
>         Auth-Type MS-CHAP {
>                 mschap
>         }
>         unix
> }
> 
> 
> But with no success
> 
> Adil
> 
> On Fri, 17 Jun 2005, Jandre Olivier wrote:
> 
>> You are using chap authentication, what i recommend u can try is, 
>> "Auth-Type := Local and also make sure your radiusd.conf allows chap 
>> authentication
>>
>> Hope it helps
>>
>> Adil Azmi Bikarbass wrote:
>>
>>> Dear FreeRadius list members,
>>>
>>> I'm really stuck with an authentication problem here:
>>>
>>> I'm getting the following error meesage anytime a user try to connect 
>>> through my Freeradius server :
>>>
>>> Auth: Login incorrect: [user/<CHAP-Password>] (from client MT2_ADSL 
>>> port 1476461184)
>>> Auth: rlm_unix: Attribute "User-Password" is required for 
>>> authentication. Cannot use "CHAP-Password".
>>>
>>> Here is the radius entry for that user:
>>>
>>> user   Password = "somepass",       Simultaneous-Use = 2,   
>>> Huntgroup-Name = "adsl-dialup"
>>>         Framed-Protocol = PPP,
>>>         Framed-IP-Address = 255.255.255.254,
>>>         NAS-Port-Type = Async,
>>>         Service-Type = Framed-User,
>>>
>>> The Huntgroup-name : adsl-dialup is to specify the IP addresses of 
>>> all the remote access servers we use
>>>
>>> Once i add the following line at the bottom of my users file the user 
>>> get connected with no problem:
>>>
>>> DEFAULT Auth-Type := Accept
>>>
>>> Please advise what could be the problem
>>>
>>> Thanks in advance
>>>
>>> Adil
>>>
>>>
>>>
>>>
>>
>>
>