Configure IP Pools

Miguel Sennoun miguel at b2i-toulouse.com
Fri Jun 24 12:00:55 CEST 2005


Hi

Try to put the IP-Pool in check items (not reply items) 

miguel

> -----Message d'origine-----
> De : freeradius-users-bounces at lists.freeradius.org [mailto:freeradius-
> users-bounces at lists.freeradius.org] De la part de DK
> Envoyé : vendredi 24 juin 2005 11:45
> À : freeradius-users at lists.freeradius.org
> Objet : Configure IP Pools
> 
> Hi,
> 
> I´ve got freeradius instaled on redhat enterprise 3, configured and
> working :-)
> But now I need to create a diferents IP pools, I tryed to do it but I
> can't :-(
> I´ve created two ippool on radiusd.conf.
> 
>       #
>         ippool main_pool {
> 
>                 #  range-start,range-stop: The start and end ip
>                 #  addresses for the ip pool
>                 range-start = 192.168.1.1
>                 range-stop = 192.168.3.254
> 
>                 #  netmask: The network mask used for the ip's
>                 netmask = 255.255.255.0
> 
>                 #  cache-size: The gdbm cache size for the db
>                 #  files. Should be equal to the number of ip's
>                 #  available in the ip pool
>                 cache-size = 800
> 
>                 # session-db: The main db file used to allocate ip's to
> clients
>                 session-db = ${raddbdir}/db.ippool
> 
>                 # ip-index: Helper db index file used in multilink
>                 ip-index = ${raddbdir}/db.ipindex
> 
>                 # override: Will this ippool override a
> Framed-IP-Address already set
>                 override = no
> 
>                 # maximum-timeout: If not zero specifies the maximum
> time in seconds an
>                 # entry may be active. Default: 0
>                 maximum-timeout = 0
>         }
>         ippool General {
>                 range-start = 192.168.75.1
>                 range-stop = 192.168.75.126
>                 netmask = 255.255.255.0
>                 cache-size = 800
>                 session-db = ${raddbdir}/db.ippool
>                 ip-index = ${raddbdir}/db.ipindex
>                 override = no
>                 maximum-timeout = 0
>         }
> 
> 
> If I configure the user to take an static IP it works fine, but when I
> try to take from IP pool it doesn´t works.
> 
> javi   Auth-Type := Local, User-Password == "123456"
>  Service-Type = Framed,
>  Framed-Protocol = PPP,
>  Framed-IP-Address = 192.168.77.35,
>  Framed-IP-Netmask = 255.255.255.255,
>  Ascend-Maximum-Time = 28800,
>  Ascend-Idle-Limit = 1800
> 
> ion Auth-Type := Local, User-Password == "123456"
>  Pool-Name := "General"
>  Service-Type = Framed-User,
>  Framed-Protocol = PPP,
>  Ascend-Assign-IP-Pool = 7,
>  Ascend-Maximum-Time = 28800,
>  Ascend-Idle-Limit = 1800
> 
> Any idea?
> 
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html





More information about the Freeradius-Users mailing list