upgrading freeRADIUS

[vicky]

Rupak,

I built the code in a "clean" directory so to say. There was nothing in 
/opt/freeradius1.0.2/ before I made
#./configure --prefix=/opt/freeradius1.0.2/
I just reset everything and retried, but still the same compilation 
error. Do you have any other suggestions?

Thanks a lot!

Vicky

Rupak wrote:

>  I also had the same problem.Later on I came to know that I had to again
>./configure --prefix=----- to another fresh unpacked tarball.Not in the old
>unpacked tar ball.just again try tar -xvf freeradius-1.0.2.tar and again
>./configure then make then again make install. This time  try and give
>another directory in --prefix section.when I had faced this problem I even
>formatted my box.Thanx that it was an isolated machine.
>
>Rupak
>
>
>Hi Stéphane (and all the others of course),
>
>Thats is what I was trying to do, configure and install the new version 
>elsewhere but still on the same machine (I'm gonna set the default ports 
>to something else so there will be no conflicts). Now I've downloaded 
>version 1.0.2 and I get a compilation error.
>I do :
>#configure --prefix=/opt/freeradius1.0.2
>#make
>and in the end of the compilation output I get this...
>
>In file included from x99_rlm.c:54:
>x99.h:26:42: openssl/des.h: No such file or directory
>gmake[6]: *** [x99_rlm.o] Error 1
>gmake[6]: Leaving directory 
>`/home/vicky/freeradius-1.0.2/src/modules/rlm_x99_token'
>gmake[5]: *** [common] Error 1
>gmake[5]: Leaving directory `/home/vicky/freeradius-1.0.2/src/modules'
>gmake[4]: *** [all] Error 2
>gmake[4]: Leaving directory `/home/vicky/freeradius-1.0.2/src/modules'
>gmake[3]: *** [common] Error 1
>gmake[3]: Leaving directory `/home/vicky/freeradius-1.0.2/src'
>gmake[2]: *** [all] Error 2
>gmake[2]: Leaving directory `/home/vicky/freeradius-1.0.2/src'
>gmake[1]: *** [common] Error 1
>gmake[1]: Leaving directory `/home/vicky/freeradius-1.0.2'
>make: *** [all] Error 2
>zsh: exit 2     make
>
>What am I missing?
>
>Cheers
>
>Vicky
>
>DELORT Stephane wrote:
>
>  
>
>>Hello Vicky,
>>
>>Haven't you try to copy your config files and do the upgrade on a test
>>    
>>
>system ?
>  
>
>>(create an exact replica on another machine and upgrade it)
>>I think it would be useful to post an "howto to upgrade from xxx to yyy"
>>    
>>
>once you've done it.
>  
>
>>regards,
>>Stéphane
>>
>>
>>
>>-----Message d'origine-----
>>De : freeradius-users-bounces at lists.freeradius.org
>>[mailto:freeradius-users-bounces at lists.freeradius.org]De la part de
>>vicky
>>Envoyé : mardi 31 mai 2005 11:31
>>À : FreeRadius users mailing list
>>Objet : upgrading freeRADIUS
>>
>>
>>Hi list subscribers, hi list admins, (again)
>>
>>I'm running a freeRADIUS server version 0.8.1 (I know it is ancient) and
>>I want to upgrade it to the latest version available. I have been trying
>>to find some kind of procedure to upgrading but with no success. Does
>>anyone know how to (in a fairly simple way) safely upgrade? The
>>safetyness is very crucial, I cant risk overwriting my old configuration.
>>
>>The old server is built with
>>#configure --prefix=/opt/freeradius
>>#make
>>#su
>>#make install
>>
>>Thanks to you all in advance and please notice that I'm not that of an
>>expert on RADIUS...
>>
>>Keep up the good work!
>>    
>>