sent tlv failure

[bel hassine monem]

Hello,
  I installed freeradius-1.1.1 
  I'm using eap/peap and mschapv2 
  but radius server return access-reject when I try to authentificate a user
   
  Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.2.14:2050, id=0,
> length=168
>         User-Name = "root"
>         NAS-IP-Address = 192.168.2.14
>         Called-Station-Id = "000f6645db2a"
>         Calling-Station-Id = "0020ed792d18"
>         NAS-Identifier = "000f6645db2a"
>         NAS-Port = 12
>         Framed-MTU = 1400
>         State = 0x9ffc28e6266e915f48a2c65201988172
>         NAS-Port-Type = Wireless-802.11
>         EAP-Message =
> 0x020800261900170301001bdc0d980a2faf3b259a1c839845feaee7fa20acda7735f5da62fb21
>         Message-Authenticator = 0xc1149f0adc27f8d6973700ddb42b51ab
>   Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 78
>   modcall[authorize]: module "preprocess" returns ok for request 78
>   modcall[authorize]: module "chap" returns noop for request 78
>   modcall[authorize]: module "mschap" returns noop for request 78
>     rlm_realm: No '@' in User-Name = "root", looking up realm NULL
>     rlm_realm: Found realm "NULL"
>     rlm_realm: Adding Stripped-User-Name = "root"
>     rlm_realm: Proxying request from user root to realm NULL
>     rlm_realm: Adding Realm = "NULL"
>     rlm_realm: Authentication realm is LOCAL.
>   modcall[authorize]: module "suffix" returns noop for request 78
>   rlm_eap: EAP packet type response id 8 length 38
>   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>   modcall[authorize]: module "eap" returns updated for request 78
>     users: Matched DEFAULT at 152
>   modcall[authorize]: module "files" returns ok for request 78
> modcall: group authorize returns updated for request 78
>   rad_check_password:  Found Auth-Type EAP
> auth: type "EAP"
>   Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 78
>   rlm_eap: Request found, released from the list
>   rlm_eap: EAP/peap
>   rlm_eap: processing type peap
>   rlm_eap_peap: Authenticate
>   rlm_eap_tls: processing TLS
>   eaptls_verify returned 7
>   rlm_eap_tls: Done initial handshake
>   eaptls_process returned 7
>   rlm_eap_peap: EAPTLS_OK
>   rlm_eap_peap: Session established.  Decoding tunneled attributes.
>   rlm_eap_peap: Received EAP-TLV response.
>   rlm_eap_peap: Tunneled data is valid.
>   rlm_eap_peap:  Had sent TLV failure, rejecting.
>  rlm_eap: Handler failed in EAP/peap
>   rlm_eap: Failed in EAP select
>   modcall[authenticate]: module "eap" returns invalid for request 78
> modcall: group authenticate returns invalid for request 78
> auth: Failed to validate the user.
> Delaying request 78 for 1 seconds
> Finished request 78
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Sending Access-Reject of id 0 to 192.168.2.14:2050
>         EAP-Message = 0x04080004
>         Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 4 seconds...
> --- Walking the entire request list ---
> Cleaning up request 78 ID 0 with timestamp 413fce87
> Nothing to do.  Sleeping until we see a request.
> 

   
   
  thanks you,

		
---------------------------------
 Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Cliquez ici.
		
---------------------------------
 Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Cliquez ici.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20060429/8010cde6/attachment.html>