EAP PEAP, unable to load certificate
Nick Larsen
larsen.nick at gmail.com
Tue Aug 29 00:19:11 CEST 2006
I've now removed Auth-Type := Local, and I get a little futher, but it now
seg-faults...
rad_recv: Access-Request packet from host 10.10.1.199:1812, id=4, length=73
User-Name = "nick"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x02010009016e69636b
NAS-IP-Address = 10.10.1.199
Message-Authenticator = 0x1889000f020061e757be3f2542db8e96
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "nick", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 1 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
radius_xlat: 'nick'
rlm_sql (sql): sql_set_user escaped user --> 'nick'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radcheck WHERE Username = 'nick' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,
radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM
radgroupcheck,usergroup WHERE usergroup.Username = 'nick' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radreply WHERE Username = 'nick' ORDER BY id'
radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,
radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM
radgroupreply,usergroup WHERE usergroup.Username = 'nick' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 4 to 10.10.1.199 port 1812
Framed-IP-Address := 10.10.1.197
Service-Type := Framed-User
Framed-Protocol := PPP
Acct-Interim-Interval := 600
Framed-IP-Netmask := 255.255.255.0
Framed-Route := "10.10.1.0/24 10.10.1.199"
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xbcd29b08ebdd9733c943a713160427f3
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.10.1.199:1812, id=5, length=156
User-Name = "nick"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0202004a198000000040160301003b01000037030177ea93b17221418dc56a55a310c695c25e02281882265889ee66f6c6aeb6536600001000040005000a000900640062000300060100
State = 0xbcd29b08ebdd9733c943a713160427f3
NAS-IP-Address = 10.10.1.199
Message-Authenticator = 0x7e1934ade016613853f374ceaf97c353
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "nick", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 2 length 74
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
radius_xlat: 'nick'
rlm_sql (sql): sql_set_user escaped user --> 'nick'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radcheck WHERE Username = 'nick' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 3
radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,
radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM
radgroupcheck,usergroup WHERE usergroup.Username = 'nick' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radreply WHERE Username = 'nick' ORDER BY id'
radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,
radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM
radgroupreply,usergroup WHERE usergroup.Username = 'nick' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 3
modcall[authorize]: module "sql" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
Segmentation fault: 11 (core dumped)
Does anyone know what may cause this? The only other time I've had radius
seg-fault is when I was trying to get rlm_sql working.
Cheers,
Nick Larsen.
On 8/29/06, Nick Larsen <larsen.nick at gmail.com> wrote:
>
> Hi,
>
> I have forcibly set Auth-Type to Local, so perhaps that's the problem.
> Here's my debug output anyway...
>
> rad_recv: Access-Request packet from host 10.10.1.199:1812, id=1,
> length=73
> User-Name = "nick"
> Framed-MTU = 1400
> NAS-Port-Type = Wireless-802.11
> EAP-Message = 0x02010009016e69636b
> NAS-IP-Address = 10.10.1.199
> Message-Authenticator = 0xa2632b22341f08798a0fca4aa0f457c9
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 160
> modcall[authorize]: module "preprocess" returns ok for request 160
> modcall[authorize]: module "chap" returns noop for request 160
> modcall[authorize]: module "mschap" returns noop for request 160
> rlm_realm: No '@' in User-Name = "nick", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 160
> rlm_eap: EAP packet type response id 1 length 9
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 160
> radius_xlat: 'nick'
> rlm_sql (sql): sql_set_user escaped user --> 'nick'
> radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
> radcheck WHERE Username = 'nick' ORDER BY id'
> rlm_sql (sql): Reserving sql socket id: 4
> radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,
> radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM
> radgroupcheck,usergroup WHERE usergroup.Username = 'nick' AND
> usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
> radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
> radreply WHERE Username = 'nick' ORDER BY id'
> radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,
> radgroupreply.Attribute ,radgroupreply.Value,radgroupreply.op FROM
> radgroupreply,usergroup WHERE usergroup.Username = 'nick' AND
> usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
> rlm_sql (sql): Released sql socket id: 4
> modcall[authorize]: module "sql" returns ok for request 160
> modcall: leaving group authorize (returns updated) for request 160
> rad_check_password: Found Auth-Type Local
> auth: type Local
>
> auth: No User-Password or CHAP-Password attribute in the request
> auth: Failed to validate the user.
> Login incorrect: [nick] (from client Finc-Wireless port 0)
> Delaying request 160 for 1 seconds
> Finished request 160
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Sending Access-Reject of id 1 to 10.10.1.199 port 1812
> Waking up in 4 seconds...
> --- Walking the entire request list ---
> Cleaning up request 160 ID 1 with timestamp 44f357bf
> Nothing to do. Sleeping until we see a request.
>
> Cheers for your help,
>
> Nick Larsen
>
>
> On 8/29/06, Alan DeKok <aland at deployingradius.com> wrote:
> >
> > "Nick Larsen" <larsen.nick at gmail.com> wrote:
> > > Now I'm trying to authenticate users via wireless PDA's, but I now get
> > > "auth: No User-Password or CHAP-Password attribute in the request" in
> > > Access-Request, I guess it's the Linksys WAG54g now, so I better start
> > > trawling through the net again.
> >
> > No.
> >
> > Run the server in debugging mode, and post the output here.
> >
> > That message happens ONLY if you forcibly set "Auth-Type = Local"
> > when it doesn't make sense to do so.
> >
> > Alan DeKok.
> > --
> > http://deployingradius.com - The web site of the book
> > http://deployingradius.com/blog/ - The blog
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
>
>
>
> --
> Regards,
>
> Nick Larsen
> Wellington
> NEW ZEALAND
>
--
Regards,
Nick Larsen
Wellington
NEW ZEALAND
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20060829/c733efdb/attachment.html>
More information about the Freeradius-Users
mailing list