wireless - freeradius - MS ldap

[Alhagie Puye]

John,

Just run "radiusd -X -A" on the FreeRADIUS server and then try
athenticating against it.

You should see a lot of debug information. Send the output to the
list.....that would be more helpful.

Thanks,

Alhagie Puye - Network Engineer
Datawave Group of Companies
(604)295-1817  

> >-----Original Message-----
> >From: 
> >freeradius-users-bounces+apuye=datawave.com at lists.freeradius.
> >org 
> >[mailto:freeradius-users-bounces+apuye=datawave.com at lists.fre
> >eradius.org] On Behalf Of Dickson, John
> >Sent: January 3, 2006 10:58 AM
> >To: FreeRadius users mailing list
> >Subject: RE: wireless - freeradius - MS ldap 
> >
> >I don't know. Ithought I was sending enouhg information.
> >
> >I was using this link to setup...it's my first.
> >http://www.tldp.org/HOWTO/LDAP-Implementation-HOWTO/radius.html
> >
> >What is confusing me is where configuration is applied to 
> >receive requests (cisco router) and where applied to pass 
> >requests (MS ldap). 
> >
> >-----Original Message-----
> >From: 
> >freeradius-users-bounces+jdickson2=mccneb.edu at lists.freeradius.org
> >[mailto:freeradius-users-bounces+jdickson2=mccneb.edu at lists.f
> >reeradius.o
> >rg] On Behalf Of Alan DeKok
> >Sent: Tuesday, January 03, 2006 11:55 AM
> >To: FreeRadius users mailing list
> >Subject: Re: wireless - freeradius - MS ldap 
> >
> >"Dickson, John" <JDickson2 at mccneb.edu> wrote:
> >> OK. In the radius.conf under module configuration I have "ldap"
> >> information pointing to the LDAP server and the 
> >authentication fails.
> >
> >  The debug log you posted doesn't show that.  In fact, it 
> >shows pretty much nothing useful.  You've taken care to 
> >*not* show the results from radtest, so all anyone can see is:
> >
> >  a) your radius server starts
> >  b) radtest sends packets.
> >
> >  They don't see:
> >
> >  c) radiusd *receiving* packets
> >  d) radtest receiving a response
> >
> >  How the heck can anyone help you without that information?
> >
> >  Alan DeKok.
> >-
> >List info/subscribe/unsubscribe? See
> >http://www.freeradius.org/list/users.html
> >
> >-
> >List info/subscribe/unsubscribe? See 
> >http://www.freeradius.org/list/users.html
> >


This message (including any attachments) is confidential, may be privileged and is only intended for the person to whom it is addressed.  If you have received it by mistake please notify the sender by return e-mail and delete this message from your system.  Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited.  E-mail communications are inherently vulnerable to interception by unauthorized parties and are susceptible to change.  We will use alternate communication means upon request.